SAFAVIEH MCR1030 Soho Tufted Velvet Swivel Desk Chair Installation Guide
- June 12, 2024
- SAFAVIEH
Table of Contents
SAFAVIEH MCR1030 Soho Tufted Velvet Swivel Desk Chair
Product Information
- Product Name: Chair
- Product Dimensions: 25.20W x 27.17D x 33.86H
- Weight Capacity: 275 lbs
WARNING
- DO NOT STAND ON CHAIR
- DO NOT OVER TORQUE BOLTS/SCREWS
Product Usage Instructions
- Before beginning assembly of the product, ensure that all parts and hardware are present. Compare the parts with the part contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 10 minutes
- Tools Required for Assembly (included): Allen Key
- If you encounter any difficulties during assembly, our friendly Customer Care team is available to assist you.
- Step 1: Take out the legs and hardware from the small box.
- Step 2: Put the washers on the bolt in the order shown in the picture.
- Step 3: Insert the base plate with the bolts and tighten completely.
- Step 4: Insert the gas lever to the base plate, ensuring they are in the correct position.
- Step 5: Insert the legs to the bar lever, ensuring they are in the correct position.
- Step 6: Put the chair upright and make sure the legs are level. This item may require periodic tightening.
NOTICE
- Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item Refer to part list and hardware list below for guidance
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- This item may require periodic tightening
- If you are having difficulty our friendly Customer Care team is always here to help
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
- If any part is missing or damaged , do not attempt to assemble the product.
- Estimated Assembly Time: 10 minutes.
- Tolls Required for Assembly (included) : Allen Key
CARE AND MAINTENANCE
- Spot clean using a mild water-free solvent.
- Only a professional cleaner should undertake a complete overall cleaning.
- The use of steam or water-based cleaners may cause excessive shrinking or staining.
Part List and Hardware List
INSTALLATION INSTRUCTIONS
- STEP 1: TAKE OUT LEGS AND HARDWARE FROM THE SMALL BOX.
- STEP 2: PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN IN THE PICTURE.
- STEP 3: INSERT THE BASE PLATE WITH THE BOLTS. TIGHTEN COMPLETELY.
- STEP 4: INSERT THE GAS LEVER TO BASE PLATE. MAKE SURE THEY ARE IN CORRECT POSITION.
- STEP 5: INSERT THE LEGS TO BAR LEVER. MAKE SURE THEY ARE IN CORRECT POSITION.
- STEP 6: PUT THE CHAIR UPRIGHT AND MAKE SURE LEGS ARE LEVEL, THIS ITEM MAY REQUIRE PERIODIC TIGHTENING.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>