SAFAVIEH TBL4401A Amberly 26 in. Reactive Grey Table Lamp Instruction Manual
- October 30, 2023
- SAFAVIEH
Table of Contents
SAFAVIEH TBL4401A Amberly 26 in. Reactive Grey Table Lamp
Product Information
The product is a portable lamp with a polarized plug that reduces the risk of electric shock. The lamp comes with a lamp base (A), neck (B), saddle (C), socket (D), harp (E), shade (F), finial (G), and a bulb (H). The lamp dimensions are 14W X 14D X 26H. The lamp is designed to use an on/off type A bulb max 100-watt or an LED bulb max 12-watt. The package includes an LED 9-watt bulb.
Product Usage Instructions
- Before beginning assembly, ensure all parts are present by comparing with the package contents list and hardware contents list. Do not attempt to assemble if any part is missing or damaged.
- Step 1: Pull the power cord to connect the Neck (B) to the Base (A). Screw the Neck (B) onto the Lamp base (A) while being careful not to twist the power cord. Tighten the connection securely.
- Step 2 : Insert the Harp (E) into the Saddle (C). Put the Shade(F) on the Harp(E), then tighten the Finial (G) into the Harp (E). Insert the Bulb(H) into the Socket(D).
- Step 3 : Put the light on a level surface and check if everything is stable.
Care and Maintenance
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with methods appropriate to the material. Avoid using chemicals and household cleaners as they may damage the finish.
SPECIFICATION
- Model#: TBL4401A
- Product Dimensions: 14″WX 14″DX26″H
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR LED BULB MAX 12-WATT THERE IS LED 9-WATT BULB IN THE BOX
- Step 1 Pull power cord to connect the Neck (B)to the Base (A). Screw the Neck (B) onto the Lamp base (A) Be careful not to twist the power cord and tighten securely
- Step2 Insert the Harp (E) into the Saddle (C). Put the shade(F) on the Harp(E),then tighten the Finial (G into the Harp (E) Insert the bulb (H) into the socket(D).
- Step3 Put the light on a level surface to check if everything is stable.
ENJOY YOUR LAMP