INTERLIGHT IL-D29DALI2 One4all Driver Installation Guide
- June 13, 2024
- INTERLIGHT
Table of Contents
**INTERLIGHT IL-D29DALI2 One4all Driver Installation Guide
**
Overview
0-10V 10V PWM
Read this manual carefully and keep it for future use.
Specifications
OUTPUT| Dimming range| DALI 1%-100%; Push-DIM 2%- 100%, 0-10V:
10%-100%
---|---|---
| Flicker percentage| <3%
INPUT| AC Voltage range| 200-240VAC
Frequency range| 47 ~ 63Hz
Power factor| >0.95 at full power
Environment| Working Temp.| -20°C ~45°C
Storage temp., humidity| -40°C ~80°C
Connection| Warranty years| 5
Lifespan (hrs) @ ta=25°C| 50000H
DALI Standard| IEC 62386-101: 2014, IEC 62386- 102: 2014, IEC 62386-207: 2009,
DALI-2
Dimension L x W x H| 125X76X30mm
Wiring Diagram
DALI
0-10V / 10V PWM
**PUSH
**
Use the dip switches to set the desired output that matches the luminary.
IL-D29DALI2 (standard 250 mA)
| DIP S.W | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| 250mA | – | – | – | – | – |
| 300mA | ON | – | – | – | – |
| 350mA | – | ON | – | – | |
| 400mA | ON | ON | – | – | – |
| 450mA | – | – | ON | – | – |
| 500mA | ON | – | ON | – | – |
| 550mA | – | ON | ON | – | – |
| 600mA | ON | ON | ON | – | – |
General information
- IP 20, only for indoor use.
- Beware of electric shocks.
- Shut off the power for installation and maintenance.
- This product may only be installed by a recognized installer.
- The luminaire and the driver must not be covered with heat-insulating material.
Symbols
Documents / Resources
|
INTERLIGHT IL-D29DALI2 One4all
Driver
[pdf] Installation Guide
IL-D29DALI2, C350-421100DBF
---|---