AmaMedic YH7253 Massage Chair Instruction Manual

Vesper
INSTRUCTION MANUAL
Enjoy the space capsule Massage Chair

PLEASE BE SURE TO READ THIS MANUAL CAREFULLY TO LEARN THE OPERATIONS OF THIS PRODUCT.
DO NOT DISPOSE OF THE MANUAL AND KEEP FOR FUTURE REFERANCE

IMPORTANT SAFETY INSTRUCTIONS

OPERATING SURROUNDINGS

• OPERATING ENVIROMENT
• Do not use or store the massage chair under damp conditions: i.e. bathroom, sauna, spa, to avoid any mold development, electric shock, fire or mechanical failure.
• Do not use the massage chair outdoors.
• Do not use the massage chair under dusty and varying temperature conditions.
• Do not place the massage chair near heater(s), stove or direct sunlight to avoid inner components overheating which may lead electrical fires and shock.
• Make sure to place the massage chair on flat level ground surface The chair should be placed on carpet, wood or hard surface flooring Make sure the power plug is properly grounded to avoid shock and injury.
• Do not use the machine while smoking

THE FOLLOWING CONDITIONS REQUIRE CONSULT FROM A MEDICAL PROFESSIONAL BEFORE USE:

• Suffered from malignant tumor
• Serious heart disease
• Serious skin disease
• Bone disease
• While pregnant or menstruating
• On bed rest as recommended by the doctor
• Spinal condition including injuries associated to the back and spine
• Hypertension and cramping
• Arthritic bone disease
• Any implanted medical device such as pacemaker
• Suffering from internal conditions (i.e. gastritis, enteritis, diarrhea, hepatitis)
• Serious blood circulation medical condition
• Consciousness issues such as vertigo and other equilibrium matters

WARNING!!!
Children under the age of 18 years old or with physical or mental condition are not permitted to use this product unattended without an adult. These precautions are taken to prevent injury and damage to the product

For safety reasons and in order to clearly indicate potential dangers should the product be used improperly, instructions have been marked in the following manners and should be strictly noted.

CAUTIONS
Non-authorized technicians are not permitted to dismantle or repair this product to avoid fire, electrical shock or serious injury Do not clean or wipe down this product with anything wet or moist when this symbol is shown.
When storing or during maintenance, be sure to disconnect the power plug from socket. Do not detach the plug with wet hands.
Make sure to turn the power switch to the “off’ position and detach the power plug when cleaning or storing the product.
During cleaning or when moving the chair, make sure to detach power cord from the wall and chair to avoid fire or electrical shock.
Do not place the machine on an unstable, uneven and unleveled surface to avoid damage, insulation failure or electrical shock.
When storing the machine, make sure to disconnect power plug from the outlet and chair to avoid fire caused by electrical surges.
Clean power plug periodically to avoid buildup leading possible fire.
Do not use it at any unsafe area or for any other purposes than personal use. Not for commercial use.
Do not store the chair in areas that are not climate controlled.
Must be in room temperature with very low humidity.
Keep the power cord unobstructed at all times, i.e. not twisted, knotted, over bent or pulled and do not place anything heavy on it

CAUTIONS
Do not make any modifications or change components using an authorized personnel. For any repairs, please contact directly or an accredited reseller.
Do not dismantle the machine by unauthorized person to avoid electrical shock, short-circuit or fire.
Do not store it near a fire, heater or flammable substances. It is one of the major reasons of causing product damage.
Should any abnormality occur(i.e. burning smell), stop using immediately and detach power plug from outlet.
Please contact your local reseller for maintenance to avoid electrical fire and injury.
Only proper rated voltage must be used Stop using immediately if power cord or power plug is damaged or not tightly fitted into the outlet or the base of the chair.
Be sure to keep children and pets away while operating to avoid any injury.
Do not place the chair in direct sunlight.
If the supply cord is damaged, it must be replaced by authorized reseller.

NAME OF EACH PART

Warning: Only rated supply 120V must be used to avoid damage to electronic components.

INSTRUCTIONS ON CONTROL PANEL

Controller

1. Power switch
2. Touch panel
3. Back cushion descend
4. Back cushion ascend
5. on/off
6. Zero-Gravity
7. Legrest ascend| 8. Legrest descend
9. Auto Programs
10. Pause
11. Timer
12. Heatting function
13. Foot Rolling massage
14. Speed adjustment| 15. Spot/Partial
16. Width adjustment
17. Air pressure massage
18. Air intensity adjustment
19. Manual massage
20. Massage roller down
21. Massage roller up
---|---|---

Instructions of buttons

OPERATION GUIDE

1. Powering up the massage chair
   Please make sure that the power switch at the back of the massage chair is in the off “O” position, then insert the power cable into the port to the left of the switch. Once firmly plugged in, proceed to plug the power cord into the outlet. Then put the switch to the on “I” and the remote should light up. (The box at back of the chair)

2. Starting your massage
   Sit in the chair with your buttocks firmly pressed against the backrest to ensure that the chair will provide a consistent massage pressure from top to bottom. The press “on” button and select a massage. Press Time Setting button to adjust massage time.
   Maximum is 30 minutes.

3. Adjusting the angle of the recline
   Please adjust the backrest and legrest angle prior to selecting a massage function. Getting into position before selecting the massage function allows for the chair to deliver a more accurate massage. The chair and legrest can be adjusted simultaneously or independently, depending on the button selected on the remote as illustrated be low.
   Press the “ ” button to choose a Zero Gravity angle.

4. Stop or finish the massage
   Normal stop : the timing function is pre-set 15 minutes. At time out the program will stop and keep the setting posture.
   Force stop: when press the restore during massage, it will stop massage immediately.
   Press button again to continue.

5. Selecting a preset programmed massage

Automatic programs combine shiatsu, kneading, tapping and air massage.

massage.
This is an exclusive massage program for the workplace walks, according to the features of long time desk work and business trip, it can ease muscles and recuperate body.
Deep massage program| Press button two times to start deep tissue massage.
A full body deep massage includes Shiatsu, Knocking and Tapping to ease and relax muscles after intense exercise, especially promote the body circulation system to improve the muscle recovery after exercise.
Thai stretch massage program| Press button three times to start thai stretch massage.
This massage will stretch your calf muscles and hamstrings with a combination of gentle  tapping, kneading, rolling, and air compression. This massage is inspired from Thai Massage, the strong kneading and stretch of the body can effectively stretch legs, it’s the best choice to relax tired muscles and increase physical vigor.
For Athletic massage program| Press button four times to start athletic massage.
An auto programme genarated by the system, focuse on the tension points collected from athletics, especially promote the body circulation system to improve the muscle recovery after exercise.
Full back massage program| Press button five times to start vertebral massage.
A full body massage, mainly focus on your full back with a deep massage that includes air  compression to relieve the symptoms of lumbar spine pain.
Neck & Shoulder massage program| Press button six times to start neck & shoulder massage. A full body massage, mainly focus on your neck and shoulders with a slow massage that incorporates soothing heat to relieve neck and back pain symptom. The curve design of the chair backrest makes the massage rollers completely fit the shoulders and the neck, which can effectively relieve fatigue and stiffness.
Recovery massage program| Press button seven times to start recovery massage. A full body deep massage includes Shiatsu, Knocking  and Tapping to ease and relax muscles after surgeries.
 Rest & Sleep massage program| Press button eight times to start rest & sleep massage.
A program designed to provide a mild massage that is great for deep relaxation. The mild massage kneads body parts from heavy strength to lightone, from light to no strength to help soothe tired body gradually.
Gentle massage program| Press button nine times to start gentle massage.
A full body gentle massage includes Kneading designed for daily use.
For Her massage program| Press button ten times to start for her massage.
A full body gentle massage includes Kneading, specially designed for female.
For Him massage program| Press button eleven times to start for him massage. A full body strong massage includes Kneading, specially designed for the male.
Lower back, waist and hipsmassage program| Press button twelve times to start waist & hip massage. A full body massage, mainly focus on your lower back, waist and-hips with a deep massage that includes air compression to relieve full body pain.

For above programs, the preset time is 15 minutes and the default of airbag intensity is medium Press the “ Intensity ” button to adjust the intensity of air pressure.
The above automatic full-body massage courses cannot be combined with other programs.

Manual setting course
Introduction of manual setting course
Partial air massage is the course which targets different needs and areas of body.

adjustable.
Rubbing| Press button two times to start rubbing massage. The speed is adjustable.
Kneading| Press button three times to start kneading massage. The speed is adjustable.
Knocking| Press button four times to start knocking massage. The speed and width are adjustable.
Knead & Knock| Press button five times to start knead & knock massage. The speed are adjustable.
Tapping| Press button six times to start knocking massage. The speed and width are adjustable.

The above manual setting course could not be combined with other courses.
For the above manual setting course, the default setting for the massage is spot-specific with medium width. Speed and width are adjustable by pressing relative button.

Function introduction for manual setting course

fast.
| Width adjustment| There are five levels to choose from: narrow, medium and wide.
| Full course/Partial massage| Press the button one time to start localized spot massage.
Press two times to start the partial massage.
Press third times to start full course.
| Massage roller move up
Massage roller move down| Press down the button to move massage roller, release the button to stop.

Functions on buttons
Introductions on buttons used for manual setting course

times to start air massage for lower body. Press three times to start air massage for full body. To close, press four times.
| Air pressure intensity adjustment| Air pressure intensity is adjustable
It could be adjusted only in air pressure massage. The circle of intensity is soft, medium and strong.
| Rolling massage| Foot rolling control key.
Press the button to start foot rolling massage, press again to stop.
| Heating function| Waist heating function.
Press the button to start waist heating massage, press again to stop

Music Function
Connecting your mobile device: Turn on bluetooth of mobile phone or tablet, then select bluetooth device labeled (code Vesper xxxxxxx ), after it syncs with massage chair speakers, you can now play your favorite tunes or audio books from your massage chair. Enhance your massage experience!

**Warning:** Supervision and guidance are necessary when people with disabilities and mental illness use the chair. Please advise with your doctor before using the chair if you have ANY medical conditions. Children under 18 should not use the chair.
Do not operate the chair if there are any children or pets nearby. Serious injuries may occur if these instructions are not followed.

SAFETY INSTRUCTIONS

1. Should any abnormality occur, shut off and detach power plug from socket.
2. When power cord damaged, it must be changed, please purchase only from Amamedic or accredited Amamedic reseller.
   Warning: Do not dismantle, modify or change components to avoid electric shock or fire.

DAILY CARE AND MAINTENANCE

Storage guide

Do not dismantle any part the chair or make modifications. Serious injury may occur
Do not attempt to repair the machine using unauthorized personnel to avoid electric shock or fire.
Make sure to shut off and detach the power plug when cleaning to avoid electric shock or hazard.
Keep the massage chair clean and free of dust. Do not place the massage chair in a humid area.
If not in use for a long period, please cover it with a cloth to protect from dust.
Do not place the massage chair under sunlight or heating source like a heater or directly by a window that has direct sunlight.

Maintenance

Use a neutral detergent only that is free of acid and alcohol.
Use a neutral detergent to clean the back cushion, head cushion and leg cushion. Let it dry.
With a damp cloth wipe down the plastic parts, pipe and Synthetic leather material of the chair.
Make sure not to use any gasoline, amyl acetate, benzene based cleaners to avoid leather color fading or discoloring.
Do not spray pesticide or aerosols near or on the chair to avoid electric shock or fire.
Please clean with dry cloth to avoid mechanical failure.

Controller maintenance

 Do not place the massage chair near heater or fire.
 Keep away from humidity to avoid electric shock and damage to the chair.
Please clean dust with soft cloth or small banister brush.
Make sure not to use detergents containing benzene, gasoline, amyl acetate.

TROUBLE SHOOTING

Checking is necessary in frequent usage.
Make sure the machine work normally before usage, after not in used for long time.

Check the switch on the chair is turned on in the “I” position
Sound in operation| The following sounds are normal
The mechansim will produce a sound for kneading or knocking
sound changes after speed adjustment
Sound from when the rollers go up or down
When the chair does a tapping massage it will make the chair vibrate making a sound
When the air inflates and deflates it will make a swooshing sound
Sound for airbag inflating and venting. Airbags may crackle
Sound for leg adjustment
  Sound for motor when the massage chair is loaded

SPECIFICATION

FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may Cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipmentgenerates,usesandcanradiateradiofrequencyenergyand,ifnotinst allied and used IN accordance with the instructions, may cause harmful inter ferencetoradio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter ferencetoradio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set  forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>