CTA PAD-GN2SUHB Heavy Duty 17-Inch Gooseneck Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA PAD-GN2SUHB Heavy Duty 17-Inch Gooseneck
Product Information
- Product Name: Heavy-Duty 17 Gooseneck w/ Cable Routing & Universal Tablet Enclosure
- Model Number: PAD-GN2SUHB
Contents:
- x2 Metal Wear-Resistant Washer
- x2 Nut
- x4 M5 x 10 Screw
- x4 M5 Nut
- x1 Socket Wrench
- x1 M5 Allen Key
Product Usage Instructions
Connecting the VESA Plate to the Gooseneck:
- Align and place VESA plate (A), washer (F), and gooseneck end connector (C) in order as shown in the diagram.
- Place washers (E & F) and nuts (D) as shown. Rotate the nut with your hand initially.
- Use the provided socket wrench (I) to rotate the nut until securely fastened.
Attaching enclosure to VESA gooseneck:
- Align enclosure VESA holes (A) to VESA plate holes (B) on the gooseneck.
- Turn in the screws (G) with the provided Allen key tool (J) while holding the nuts (H) in the back.
Setting up enclosure and tablet:
- Loosen all four screws (A) on the enclosure by half a turn using the provided special Allen key tool (J).
- Insert your tablet device into the enclosure by extending the arms outwards.
- Retract all four arms onto the corners of the tablet.
- Tighten all four screws (A) using the special Allen key tool (J) until securely tightened.
Fixed the tablet:
No specific instructions were provided.
Swapping out different corner arms (optional):
- Tighten the inner nut by using the security Allen key tool (J) to adjust the enclosure thickness.
- You can switch out your corner arms from exposed to solid or vice versa.
Adjusting Gooseneck and Rotation:
Flex the gooseneck (C) to adjust the view angle according to your needs.
Cable Management:
- Fish one end of the cable through the top hole and route the other end through the other hole.
- No specific instructions were provided for multi-direction flexing or cable routing.
- Please note that the tablet shown in the illustrations is for demonstration purposes only and is not included in the product.
For further assistance, please contact customer support at 888-733-4448.
PACKAGE CONTENTS
INSTALLATION
Connecting the VESA Plate to the Gooseneck:
Attaching enclosure to VESA gooseneck:
Setting up enclosure and tablet:
Just loosen the screw by half a turn to release the corners.
- Begin inserting your tablet device into the enclosure by loosening the enclosure corner arms. Find the screw on the body (A) as illustrated and losen all (4) with provided special allen key tool (J).
- Extend the arms outwards as far as the range can go.
- Insert your tablet then retract all(4) arms onto the corners of the tablet as illustrated above.
- While all the arms are tightly secured on the tablet edge corners, go back to the backside and using a special Allen key tool (J) rotate the opposite direction for all (4) screws until securely tightened.
Fixed the tablet:
Tighten the inner nut with the (J) security Allen key to adjust the
enclosure thickness.
Swapping out different corners arms (optional):
You can switch out your corner arms from exposed to solid or vice versa as
illustrated above. Exposed corners allow you to have the volume buttons not be
as covered.
Adjusting Gooseneck and Rotation
Cable Management
Contact Information
- 36 Taaffe Place Brooklyn, NY 11205
- support@ctadigital.com
- 888-733-4448
- www.ctadigital.com.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>