CTA ADD-HACMMT Height Adjustable Ceiling Mount Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA ADD-HACMMT Height Adjustable Ceiling Mount
Product Information
The Height Adjustable Ceiling Mount for Monitors and TVs is a versatile mounting solution that allows you to securely mount your TV or monitor from the ceiling. It comes with various components for installation, including screws, bolts, and canopy pieces.
Contents:
- A x4 1/4”
- B x4 14#x2”
- C x4 1/4”x2”
- D x4 M4x10
- E x1
- F x1
- G x2 J x2
- H x2
Product Usage Instructions
Mounting to Drywall Ceiling:
- Place the canopy (A) of the mount to the desired location on the ceiling.
- Using a screwdriver (not included), attach the canopy to the ceiling by securely tightening the screws (A and B).
Mounting to Concrete Ceiling:
- Place the canopy (A) of the mount to the desired location on the ceiling.
- Using a screwdriver (not included), attach the canopy to the concrete ceiling by securely tightening the screws (C).
Attaching VESA Compatible Device:
- Align the holes of the VESA compatible device with the wall mounts VESA plate.
- Insert screws (D) through the back of the mounting plate.
- Rotate the screws using the included allen key tool (E) to securely attach the device to the mount.
Setting Up Cable Management:
- Connect cables from your TV into the pole body.
- Route the wiring through the body until the cable comes out from the hidden cutout in the ceiling into the desired connection.
- Use the end cap and canopy (G) for a clean and organized look by clicking them together and inserting them in the bottom end.
- Place the canopy cover pieces (H) over the mounting base by clamping them together.
Height Adjustability:
To adjust the height of the mount, follow these steps:
- Turn the screw with the allen key tool (E) counterclockwise to loosen.
- Extend or retract the pole to adjust to the desired height.
- Turn the pole knob clockwise to tighten and secure the height adjustment.
Tilt Adjustability:
To adjust the tilt of the VESA plate, follow these steps:
- Turn the bolt with the wrench (F) counterclockwise to loosen the connection.
- Adjust the tilt of the VESA plate to the desired angle.
- Turn the bolt clockwise to tighten and secure the tilt adjustment.
Height Adjustable Ceiling Mount for Monitors and TVs
CONTENTS
INSTALLATION
- Mounting to Drywall Ceiling:
A. Place the canopy (A) of the mount to the desired location on the
ceiling. Using a screwdriver (not included), and components (A and B) – set up
the canopy to the ceiling until securely tightened.
B. Mounting to Concrete Ceiling:
A. Place the canopy (A) of the mount to the desired location on the
ceiling. Using a screwdriver (not included), and component (C) – set up the
canopy to the ceiling until securely tightened.
-
Attaching VESA Compatible Device:
A. To attach a compatible VESA device, align the holes of the device to the wall mounts VESA plate. Then, insert screws (D) through the back of the mounting plate, then rotate using the inlcuded allen key tool (E). -
Setting Up Cable Management
- A. Connect cables from your TV into the pole body as illustrated. Continue wiring through the body until the cable comes out from the hidden cutout in the ceiling into whatever connection is made (by others).
- B. Once all the wiring has been routed, use the end cap and canopy for a clean and organizedseamless look. Click together the two pieces (G) and insert them in the bottom end as shown.
- C. Take the canopy cover pieces (H) and place them over the mounting base by clamping them together as shown above.
Height Adjustability
Turn screw with allen key (E) to loosen, then extend or retract pole to adjust to the desired height. Turn pole knob clockwise to tighten.
Tilt Adjustability
Turn bolt with wrench (F) to loosen connection, allowing adjusting ease of tilting in the VESA plate. Turn it clockwise to tighten the connection.
36 Taaffe Place Brooklyn, NY 11205
support@ctadigital.com
778-991-0169
www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>