VIAVI TRI-DSP-180-ADV 180 DSP Lite Digital TV Level Meter User Guide

June 13, 2024
VIAVI

VIAVI TRI-DSP-180-ADV 180 DSP Lite Digital TV Level Meter

Product Information

The product is the TRI-DSP-180-ADV model manufactured by Viavi Solutions. It is a versatile device with several features and functions.

Features:

  • Flashlight function
  • Automatic detection and saving of the channel plan
  • Level measurement of digital and analog signals
  • Tilts setting

Order Number: TRI-DSP-180-ADV
Manufacturer Website: viavisolutions.com

Product Usage Instructions

Flashlight Function:
To use the flashlight function, refer to the user manual for detailed instructions.

Automatic Detection and Saving of Channel Plan:
This feature allows the device to automatically detect and save the channel plan. Please ensure you have a valid channel plan available for detection.

Level Measurement of Digital and Analog Signals:
Use this feature to measure the levels of digital and analog signals. Refer to the user manual for specific instructions on how to perform level measurements.

Tilts Setting:
To set the tilts, follow these steps:

  1. Select the Low Tilt channel and open it with “Ent” key.
  2. Configure the Low Tilt channel as desired.
  3. Repeat the same steps for the High Tilt channel.
  4. Change Channel ID to “Yes” using the Up/Down keys.
  5. Go to “Troubleshooting” and open “Tilt”.

Manufacturer Support:
If you encounter any difficulties or need further assistance, please visit the manufacturer’s website at viavisolutions.com for support.

Key features and applications

  • Automatic and fast channel plan detection up to 1.25GHz

  • Level measurement of analogue/digital/DOCSIS TV signals with display of the carrier signal-to-noise ratio

  • Return channel spectrum analyser (4 – 110 MHz)

  • Complete channel plan scan with tilt measurement

  • QAM analysis: MER/BER/Constellation/EQ

  • DOCSIS 3.1 OFDM analysis

  • IP performance measurement: Ping, route trace, VoIP

  • Configuration and results management via StrataSync

  • Touch screen and flashlight function

  • Optional SW extension of the TRI-DSP-180-LITE model (functions included in other models):

    • Spectrum Analyzer (5 to 1250 MHz)
    • Hum measurement (Hum, 50Hz) for ground loop location and power supply problem of active components.
  • Optional power meter and optical inspection:

  • Optional HL leakage measurement kit (Home Leakage)

  • Frequency reflectometer and carrier generator and pilots

    • only on the TRI-DSP-180-ADV model

180 DSP – Features matrix

Order number and description

  • TRI-DSP-180-LITE: Lite Model
  • TRI-DSP-180-BASE : Base Model– adds Spectrum (5-1250MHz) and Hum
  • TRI-DSP-180-ADV : A dvanced Model, adds FDR and Source

Automatic detection and saving of the channel plan

Level measurement of digital and analog signals

Tilts setting

  • Select the Low Tilt channel and open it with Ent :
  • Configure in the same way the high Tilt channel:

viavisolutions.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals