SAFAVIEH CHA7000A Chandeliers Lighting Instruction Manual
- June 13, 2024
- SAFAVIEH
Table of Contents
ITEM#:CHA7000A
Size:28X32X48″
CHA7000A Chandeliers Lighting
WARNING
- Please make sure that you have all parts indicated and they are in good condition before you begin assembly of this item. Refer to part list and hardware list below for guidance
- This item should be assembled on the ceiling to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 30 minutes.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather
duster or with an appropriate vacuum_x005f brush attachment. Wipe with a soft,
dry cloth and clean lamp bases with the methods appropriate to the material.
Avoid the use of chemicals and household cleaners as they may damage the
finish.
Part List and Hardware List
| PEICE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|
| A | Lamp Body | 1X | |
| B | Light Bulb | 6X | |
| C | Canopy | 6X | |
| HW1 | Screw φ4*25 | 4X | |
| E | Mounting Plate | 1X | |
| F | Canopy | 1X | |
| G | Pipe | 4X | |
| I | HW2 | 2X | |
| J | Terminal cap | 2X | |
| K | Socket | | 6X
PREPARATION
- Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
- If any part is missing or damaged, do not attempt to assemble the product.
- Estimated Assembly Time: 30 minutes.
- If you are having difficulty, our friendly Customer Care team is always here to help. Please email customersupport@safavieh.com
Step 1:
Unpack all parts from cartons carefully. Install theMounting Plate (E)into
Canopy(F) fix it with screw(D).
STEP 2: To connect fixture wires:
Connect the live wire (L) from fitting to the live wire from main power
supply.
Connect the neutral wire (N) from fitting to the neutral wire from main power
supply. make the green screws(D) connect the ground wire.
Please pay close attention to avoiding the wires exposing outside when wiring
connections.
Step 3:
Install the Canopy(F) to the ceiling fix it with Screw(HW1)by turning the
Nut(HW2) anti-clockwise.
STEP 4: Connet the Pipe(G) into Canopy(F) and lock it anti-clockwise.Then fix the other pipe one by one and until the last pipe connet to the Lamp base(A) and tight it anti-clockwise.
STEP 5:
Insert the light bulb(B) into Socket(L) and fix the lamp shade(C).
STEP 6:
Consult a qualified electrician to ensure correct branch circuit conductor.
ENJOY YOUR LAMP PLEASE USE TYPE”G” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR
LED BULB MAX 4- WATT THERE ARE 6PCS LED 4-WATT BULB IN THE BOX
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>