CTA PAD-PCGKA8 Protective Case Instruction Manual
- June 13, 2024
- CTA
Table of Contents
CTA PAD-PCGKA8 Protective Case
CONTENTS
- Tablet Not Included
TABLET CASE FEATURES
INSTRUCTIONS
- If your iPad has a previously installed screen protector, please remove it before continuing.
How to insert the tablet into case
- STEP 1: Peel away the plastic frame starting with the bottom of the case as shown to the left. Work your way around the perimeter, unclipping the frame where there are clips.
- STEP 2: Starting at a corner of the case, peel away the silicone jacket. Work your way around until only the back half of the hard case remains
- STEP 3: Insert the tablet into the back portion of the hard case
- STEP 4: Starting at a corner, re-ap-ply silicone jacket around the back portion of the hard case
- STEP 5: Re-insert the front frame back on. Make sure you go around the perimeter of the case and clip all the clips securely and tight.
How to flip out kickstand
- Locate the kickstand at the case rear and fold it out underneath the strap.
- Display tablet at desired viewing angle.
- Press the kickstand back in to return to handheld mode.
How to use in handheld
Tablet Not Included
- Identify the velcro hand strap and adjust it to the fitted size. Insert your hand as shown and you’re ready for a mobile-held setup.
Attaching carry strap
- If you have the corresponding shoulder strap (sold separately), insert the ends into the strap holes. Then tie them up and clasp the front as shown to the left.+
- 36 Taaffe Place Brooklyn, NY 11205
- support@ctadigital.com
- 888-733-4448
- www.ctadigital.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>