INIU WI-220 3 in 1 Wireless Charger Station User Manual
- June 13, 2024
- INIU
Table of Contents
The SAFE Fast Charge Pro
WELCOME
GUIDE
Wireless Charger WI-220
[email protected]
@iniuofficial
Product Overview
- Phone Wireless Charging Stand
- Built-in iwatch Magnetic Charger
- AirPods Charging Connector
- LED Time Display
- LED Indicator
- Light Sensor
- USB-C Port
- Time-setting Buttons
- Heat Dissipation Holes
- Non-slip Mat
- Lithium Cell Cover
Specification
Model | WI-220 |
---|---|
Input | 5V / 9V / 12V |
Output | Phone: 5W / 7.5W / 10W / 15W |
iWatch: 5V 500mA (Max)
AirPods: 5V 1A (Max)
Battery for LED Time Display| Lithium Cell CR2032
Fast-Charge Protocols| QC / PD / AFC
Charging Distance| 5mm (Max)
Before You Charge
Please pull out the insulation film on the back of the base.
Set the Time
-
Connect the charger with a power adapter, and the LED Time Display will show up automatically.
-
Then press “M” button on the left side of the base once until the digits of Hour flash.
-
Use the plus and minus buttons to adjust the current hour.
-
Press “M” button once again until the digits of Minute flash.
-
Use the plus and minus buttons to adjust the current minute.
-
Press the “M” button once to confirm.
Replace the Battery for LED Time Display
- Open the cover of the lithium cell at the bottom of the charger.
- Take the battery out of the slot.
- Put a new lithium cell into the slot.
- Close the battery cover.
Note: The normal service life of the lithium cell is about 3 years, which might be longer or shorter depending on actual usage.
Charge Your Devices
-
Connect the wireless charger with the cable and adapter included.
When the charger is correctly connected, the indicator will turn green and will be always on. -
Place a compatible mobile phone in the center of the wireless charging stand.
Place an iWatch on the Watch magnetic charger, and charging will start automatically.
Note: Adjust the devices to the center spot to make sure they are charging.
Plug in and charge your AirPods with the built-in connector.
Note: The LED indicator will turn green during charging and turn off without a power supply. -
The charger will auto-adjust the brightness of the LED indicator and the LED time display based on the surroundings.
Note: The blinking green light of the indicator means that there is a foreign object presence.
Please check if there’s any foreign object between your device and the charging pad, including the metal plate of a car mount, credit cards, keys, coins, or NFC cards.
About the Charging Speed
- For the fastest charging, please use the included USB-C cable and 25W power adapter.
- Wireless chargers make charging more convenient than wired ones, but confined by current wireless technology, their charging speed is slower than that of the wired chargers.
- Make sure the device is placed on the center of the charger, otherwise it will fail to charge or charge slowly.
Warranty
At INIU, we use only the highest-quality materials, giving us the confidence to provide you with:
30-day money back guarantee
Industry-leading 3-year warranty
Lifetime technical support
Whatever you need, were here to help. Just get in touch with us at:
[email protected]
You will get timely assistance, replacement or refund. We promise to make things right with our wholehearted service.