iLIVE IAHB64 Bluetooth Wireless Headphone User Guide

iLIVE IAHB64 Bluetooth Wireless Headphone

PRODUCT INFORMATION

Model No. IAHB64 v893-02

Important Safety Instructions

• Read these Instructions.
• Keep these Instructions.
• Heed all Warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install by the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, beat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for
• your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacies, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightning storms or when unused for long periods. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer. or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

Additional Warnings and Precautions

• CAUTION : TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT, AND FULLY INSERT.
• WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing
• CAUTION : Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
• WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• WARNING : Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish, As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective harrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining.
• WARNING : Use of this unit near fluorescent lighting may cause interference regarding the use of the remote. If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
• CAUTION : Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
• WARNING : There is a danger of explosion if you attempt to charge standard Alkaline batteries in the unit. Only use rechargeable NiMH batteries.
• WARNING : The remote control’s button cell battery contains mercury. Do not put in the trash, instead recycle or dispose of as hazardous waste
• WARNING : Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of in normal household waste. Contact your local government for disposal or recycling practices in your area. They should never be incinerated since they might explode.
• WARNING : Shock hazard Do Not Open.
• Caution and marking information is located at the rear or bottom of the apparatus.
• Objects filled with liquids, such as vases, shall not be placed on the apparatus.
• The mains plug is used as a disconnect device and it should remain readily operable during the intended
• The battery shall not be exposed to excessive heat such as sunshine, fire, or the like.
• Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not mix old and new batteries.
• Completely replace all old batteries with new ones.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
• Batteries should be recycled or disposed of as per state and local guidelines.

IMPORTANT NOTES

• WARNING: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
• The lightning flash with the arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
• This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user-accessible parts.

FEATURES AND CONTROLS

BLUETOOTH

Pairing a Bluetooth Device for the First Time

1. Power on the unit by pressing and holding the Power/Pair button for approximately 4 seconds.
   • The indicator will flash red and blue. When pairing, remain within 3 feet of the unit.
2. Using the native controls on your Bluetooth device, select the IAHB64 in your Bluetooth settings to pair.
   • If your device requests a password, enter the default password 0 0 0 0. Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices. After the initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.
3. If your device should become unpaired or you find it is unable to connect, repeat the above steps.

LINE IN

Using the Audio Input
Requires a 3.5mm audio cable (included).

1. Connect a 3.5mm audio cable to the Line Input on the rear of the unit and the audio output on an audio device.
2. Set the Power Switch to Line In mode.
3. Use the native controls on the connected device to play your audio through the unit.

Playing Audio Wirelessly

• To play or pause the selected track, use the native controls on the connected Bluetooth Device or press the Play/Pause/Volume button.
• Audio played through the connected Bluetooth device will now be heard through the speakers.

Using the Speakerphone

1. When a call is received, a ringtone will sound through the speakers.
2. Press the Power/Pair button to accept the call or accept the call with the native controls on the connected device.
3. The incoming call received through the device will now be heard through the speakers.
4. To end the call, press the Power/Pair button or end the call using the native controls on the connected device.

Note : To re-dial the last dialed number, press the Power/Pair key twice.

LED INDICATORS

FCC Warnings

Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>