dji V1.0 Spark with Remote Control Combo User Guide

June 13, 2024
DJi

dji V1.0 Spark with Remote Control Combo User Guide

dji V1.0 Spark with Remote Control Combo User Guide

SPARK
The DJI™ SPARK™ is DJI’s smallest flying camera featuring a stabilized camera, Intelligent Flight Modes, and Obstacle Avoidance inside a light, portable body. Equipped with a Vision System and 3D Sensing System*. Spark can film 1080P videos, capture 12-megapixel photos, and is capable of Quick Shot and Gesture Control. With a maximum flight speed of 31 mph (50 kph), and a maximum flight time of 16 minutes**, Spark is quick and fun, making drone photography exciting, simple and professional.

dji V1.0 Spark with Remote Control Combo User Guide - Product
Overview

  1. Gimbal and Camera
  2. Vision System
  3. 3D Sensing System
  4. Intelligent Flight Battery
  5. External Charging Contact
  6. Motors
  7. Propellers
  8. Front LEDs
  9. Aircraft Status Indicators
  10. Micro USB Port
  11. Micro SD Card Slot
  12. Battery Level Indicators
  13. Power Button
  • The Vision System and 3D Sensing System are affected by surrounding conditions. For more information, please read the Disclaimer and Safety Guidelines or watch the tutorial in the DJI GOTM 4 app or on the Official DJI website: http://www.dji.com/spark
    ** Maximum flight time was tested in windless conditions flying at a consistent 12.4 mph (20 kph). This value should be taken for reference only.

Download the DJI GO 4 App

Search for `DJI GO 4′ on the App Store or Google Play, or scan the QR code to download the app on your mobile device.
⚠DJI GO 4 is supported in iOS 9.0 (or later) or Android 4.4 (or later).

http://m.dji.net/djigo4

 Prepare the Battery

Charge the battery for the first time to activate it.

dji V1.0 Spark with Remote Control Combo User Guide - Prepare the
Battery

The battery is fully charged when the battery level indicators turn off. Charge time: ~ 1 hr 20 min
Press once to check the battery level. Press once, then again and hold to turn on/off.

Activation and Connection

Launch DJI GO 4, tap the icon in the upper right corner, scan the QR Code on the storage box, and follow the prompt for activation.
Use your DJI account to activate the aircraft. Activation requires an internet connection.

dji V1.0 Spark with Remote Control Combo User Guide - Activation and
Connection

Controls

Flying the aircraft with touch control or the Remote Controller.

dji V1.0 Spark with Remote Control Combo User Guide -
Controls

Specifications

dji V1.0 Spark with Remote Control Combo User Guide -
Specifications

For more information, read the User Manual: http://www.dji.com/spark This content is subject to change without prior notice.
SPARK is a trademark of DJI. Copyright © 2017 DJI All Rights Reserved.

Designed by DJI. Printed in China.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

DJi User Manuals

Related Manuals