BOSS Car Multimedia Receiver Bluetooth Audio Hands-Free Calling Built-in Microphone User Manual

: June 7, 2024
: Boss

Table of Contents

BV7265B USER’S MANUAL
Installation
- INSTALL THE UNIT
- WIRING CONNECTION
OPERATION
TROUBLE SHOOTING

Blurtooth

BV7265B USER’S MANUAL

BLUETOOTH® | IN-DASH SINGLE-DIN
MP3-COMPATIBLE DIGITAL MEDIA
AM/FM RECEIVER
FEATURING 3.2″ (81 mm) WIDESCREEN
DIGITAL TFT LCD MONITOR

BOSSCA~1

Installation

ATTENTIONS OF INSTALLATION

This player should be installed by professional technician.
please read the instruction and operation of equipment carefully before installing.
Make sure to connect other wires before power connection.
To avoid short circuit. Please make sure all the exposed wire are insulating.
please fix all the wires after installation.
please make connection to the player accordingly to this instruction manual. Wrong connection may cause damage.
This player only fit for 12V DC device and please make sure your car belongs to this kind of cathode grounding electrical system.
Please connect the wires rightly. Wrong connection will cause malfunction or damage the electrical system.

INSTALL THE UNIT

Dashboard
Sleeve tab to bend

REMOVE THE UNIT
Insert the keys supplied on the both sides of the unit until they click. Pulling the keys and makes them to remove the unit from the dashboard.

REMOVE THE UNIT 1 REMOVE THE UNIT 2 REMOVE THE UNIT
3

WIRING CONNECTION

WIRING CONNECTION 1

WIRING CONNECTION 2

NO	FUNCTION	NO	FUNCTION
A1		B1	REAR-R SPEAKER +
A2		B2	REAR-R SPEAKER –
A3		B3	FRONT-R SPEAKER +
A4	POWER+	B4	FRONT-R SPEAKER –
A5	ANTENNA	B5	FRONT-L SPEAKER +
A6		B6	FRONT-L SPEAKER –
A7	ACC	B7	REAR-L SPEAKER +
A8	GROUND	B8	REAR-L SPEAKER –

This player can only be used by the 12V DC cathode grounding electrical system.
Don’t connect the terminals of the battery until the player is absolutely with well erection joint.
Please make sure to connect the yellow wire to the positive of the battery(+).
When change the fuse. Please make sure the specifications are same.
Using good quality speaker with 4-8 ohm can result in the best effect of the equipment.

OPERATION

LOCATION OF KEYS

1. BAND 11. MUTE
2. Seek down button 12. USB
3. PUSH/ENT/SEL 13. AUX IN
4. Seek up button 14. RESET
5. 1/ Play/pause button 15. MENU
6. 2 INT 16. 5 10-
7. 4 RDM 17. 6 10+
8. MIC 18. 3RPT
9. TFT 19. MODE
10. SD CARD SLOT

Key functions

KEYS	ACTION	RADIO	USB/SD	AUX	BT
POWER/ MUTE	Short	Power on / Mute on/off	Power on / Mute on/off
Power on / Mute on/off	Power on / Mute on/off
Long	Power off	Power off	Power off	Power off
MENU	Short	Main menu	Main menu	Main menu	Main menu/Transfer
Long	/	file search / Music/Photo/Video change(+ I<< button)	/	/
MODE	Short	source change	source change	source change	source

Basic Operation

Turn on/off the unit and mute function
Press MUTE button to turn on the unit. When the unit is on. Shortly press this button for mute on/off. Press and hold it for 2 seconds to turn off the unit.

Audio setting
Repeatedly press VOL knob for the audio menu:
BAS(Bass)-TRE(Treble)-BAL(Balance)-FAD(Fader)-EQ-LOUD
In each item rotating VOL knob to set them.

Switch source
Shortly press MODE button to change source. Also shortly press MENU button into the main menu. Rotating the VOL knob to enter other source or settings item.

Main menu adjustment
Shortly press MENU button into the main menu. Rotating the VOL knob to select the SETTINGS. There are below items:
Language-Time-PAL/NTSC-Factory default-Time mode- Radio Area–Brightness- Contrast-Hue
In each item rotating VOL knob to set them.

Reset the unit
Press RESET button to reset the unit. It is activated for the following reasons:
a) Some buttons do not operate.
b) Error symbol shows on the display.
Note: if the RESET function is activated, All the memory will be lost.

Radio Operation

Receive a radio station
In RADIO source press BAND button to select desired band. Shortly press / button to receive the desired radio station. Press and hold / button for manual tuning the frequency.

Auto Store:
Press BAND button for 2 seconds to auto store stations to band 1~3.

Manually store station & recall preset station
Tuning to a station with or button. Press and hold one of the 1- 6 preset button for 2 seconds. The current station is stored into the number button. Shortly press the preset button (1~6) to directly listen the station that saved in the corresponding preset button.

USB Operation
When an USB driver inserted to the unit, the unit will play the MP3/WMA file automatically. If an USB drive is already inserted in the unit. Keep pressing MODE button shortly until the USB mode display appears.

Select file
Press / button to skip to next/previous file. Hold / button to fast forward or fast reverse.

Play/Pause
Press button to pause/playing the file.

INT function
Press INT button (on remote) to play the first 10 seconds each file. Press it again to cancel this function.

RPT function
Press RPT button (on remote) to select repeat mode: RPT ONE / RPT ALL (default).

Random function
Press RDM button (on remote), all files will be played randomly. Press it again to cancel this function.

+10/-10 file skip
Press 5/-10 button to skip back 10 file playing. Press 6/+10 button to skip forward 10 file playing.

Search song
Press and hold BAND button for 2 seconds. It will list all the songs on the display. Using VOL+/-button to select the desired song then press VOL knob to play.

Video/Photo/Music changing
Way 1: Shortly press BAND button to change Video/Photo/Music mode.
Way 2: Press and hold MENU button for 2 seconds. It shows the file search screen. Press I<< button. One of the MUSIC/VIDEO/PHOTO symbol will be active. Rotating VOL knob to desired symbol then press VOL knob. The corresponding source file will be playing.

AUX IN operation
Connecting the signal to the R/L IN connecter behind the unit. Then pressing MODE button to switch to AUX IN mode.

Bluetooth Operation
Pairing
On mobile phone, select the Bluetooth item searching the Bluetooth device. “ Boss Audio BV7265B ” should appear in the list, select “ Boss Audio BV7265B ” and then input password “0000” If it needs a password. When successful paired, the BT mark will be shown on the display.

Bluetooth Audio
Press MODE button to switch to BT mode. It will play a song of your mobile phone automatically. Press key to pause/ play the song. Press / button to select next/previous song.

Answering / rejecting an incoming call
When there is a phone is coming in. Press key to answer the call. Press key to reject the call. When finished a conversation, press key to hang up this call.

Transfer the call between mobile phone and unit
During the talking mode, you can press MENU button to transfer the phone call between the mobile phone and the unit.

Disconnect the Bluetooth
When the mobile phone paired with the unit. If you want to disconnect the Bluetooth. Press and hold MODE button for 2 seconds to disconnect/re- connect the Bluetooth.

Other operation please reference the Key functions table above.

TROUBLE SHOOTING

GENERAL

Power Supply Requirements : DC 12 Volts, Negative Ground
Chassis Dimensions : 178 (W) x 160 (D) x 50 (H)

Tone Controls
– Bass (at 100 Hz) : ±10 dB
– Treble (at 10 kHz) : ±10 dB
Maximum Output Power : 4 x 40 watts
Current Drain : 10 Ampere (max.)

RADIO FM AM
Frequency Coverage 87.5 to 107.9 MHz 530 to 1710 kHz
IF 10.7 MHz 450 KHz
Sensitivity 4μV(S/N=30dB) 36dBuV(S/N=20dB)
Stereo Separation >25dB /

TROUBLE SHOOTING
Before going through the checklist, check wiring connection. If any of the problems persist after checklist has been made, consult your nearest service dealer.

Symptom

|

Cause

|

Solution

---|---|---
No power.| The car ignition switch is not on.| If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”.
The fuse is blown.| Replace the fuse.
No sound.| Volume is in minimum| Adjust volume to a desired level.
Wiring is not properly connected.| Check wiring connection.
The operation keys do not work.| The built-in microcomputer is not operating properly due to noise.| Press the reset button.
The radio does not Work. The radio station automatic selection does not work.| The antenna cable is not connected.| Insert the antenna cable firmly.
The signals are too weak.| Select a station manually.

BOSS Audio Systems
3451 Lunar Court • Oxnard, CA 93030
www.bossaudio.com
800-999-1236 US Toll-free
805-751-4853 Customer Service
Tech Support: www.bossaudio.com/support

0619

iPod® and iPhone® are trademarks of Apple, Inc. registered in the U.S. and other countries.
BOSS Audio Systems is not affiliated with Apple, Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by BOSS Audio Systems is under license. Other trademarks and trade names are those of their respective owners.