DOMO DO7347H Ceramic Heater Instruction Manual

: June 13, 2024
: DOMO

Table of Contents

DOMO DO7347H Ceramic Heater
Product Information
Product Usage Instructions
Usage
CLEANING AND MAINTENANCE
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

DOMO DO7347H Ceramic Heater

DOMO-DO7347H-Ceramic-Heater-PRODUCT

Product Information

Product Name: Ceramic Heater
Model Number : DO7347H
Manufacturer : Unknown

Product Usage Instructions

Safety Precautions:

Do not cover the heater during use to avoid overheating.
Keep the electrical cord away from hot parts of the heater.
Do not attempt to repair the heater yourself. Consult an electrician or the manufacturer’s after-sales service for the use of original parts.
Do not use the heater near water or in damp locations.
Ensure proper ventilation when using the heater.
Avoid touching the cord or control buttons during use.
Keep the heater out of reach of children to prevent accidents.
Read and follow all instructions in the user manual for safe and proper use of the product.

Parts:

Air outlet
Air inlet
Power switch
Handle
Control panel with display
On/off button
Function button
Increase button
Decrease button
Timer setting
Oscillation
Remote control

First Use:
Before using the heater for the first time, ensure proper ventilation. Any initial odor will dissipate quickly.

Remote Control:
To use the heater with the remote control, insert a CR2032 button cell battery into the remote control following the instructions provided. The remote control has a range of 5 meters.

Usage

On/Off Button:

Press once: low power (1200 W) with “LO” displayed on the screen. The heater will operate at its lowest power.
Press again: ECO mode with the symbol displayed. The temperature can be adjusted using the increase or decrease buttons. Holding down the button will continuously adjust the temperature. If the temperature drops below the set temperature, the eco function will activate again to maintain energy-efficient operation.
Press for the third time: high power (2000 W) with “HI” displayed on the screen. The heater will operate at its highest power.

Note : The heater remembers the last temperature setting. When turning on the heater again and selecting the eco mode, the last temperature setting will appear on the display.

SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be taken, including the following:

Read all instructions carefully. Keep this manual for future reference.
Make sure all packaging materials and promotional stickers have been removed before using the appliance for the first time. Make sure children cannot play with the packaging materials.
This appliance is intended to be used in household and similar applications such as:
- staff kitchen areas in shops, offices, and other working environments;
- farmhouses;
- by clients in hotels, motels, and other residential-type environments;
- bed and breakfast type environments.
Children should be supervised to ensure that they do not play with the appliance.
This appliance can be used by children aged 16 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children unless they are older than 16 and supervised.
Keep the appliance and its cord out of reach of children younger than 16 years.
Attention : This appliance cannot be used with an external timer or a separate remote control.
- The appliance can become hot during use. Keep the power cord away from hot parts.
- Don’t cover the appliance.
Before use, check if the voltage stated on the appliance corresponds with the voltage of the power net
Do not let the cord hang on a hot surface or the edge of a table or countertop.
Never use the appliance when the cord or plug is damaged, after a malfunction, or when the appliance itself is damaged. In that case, take the appliance to the nearest qualified service center for check-up and repair.
Close supervision is necessary when the appliance is used near or by children.
The use of accessories that are not recommended or sold by the manufacturer can cause fire, electrical shock, or injuries.
Unplug the appliance when it is not in use, before assembling or disassembling any parts, and before cleaning the appliance. Put all buttons and knobs into the ‘off’ position and unplug the appliance by grasping the plug. Never unplug by pulling the cord.
Do not leave a working appliance unattended.
Never place this appliance near a gas stove or electrical stove or in a place where it may come into contact with a warm appliance.
Do not use the appliance outdoors.
Only use the appliance for its intended use.
Always use the appliance on a steady, dry, and level surface.
This product is only suitable for well-insulated spaces or occasional use.
Only use the appliance for domestic use. The manufacturer can not be held responsible for accidents that result from improper use of the appliance or not following the instructions described in this manual.
All repairs should be carried out by the manufacturer or its after-sales service.
Never immerse the appliance, the cord, or the plug in water, or any other liquid.
Make sure that children do not touch the cord or appliance.
Keep the cord away from sharp edges hot parts or other heat sources.
Before use, remove all packaging materials and any promotional stickers.
The appliance is not intended for use in the bathroom, washing area, or other damp areas. A person who is in the bathtub or shower should not be able to touch the appliance, the power cord, or the control knobs.
This product is only suitable for well-insulated spaces or occasional use.

RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

PARTS

Air outlet
Air inlet
On/off switch
Handle
Control panel with display
On/off switch
Function button
Button to increase
Button to decrease
Set timer
Oscillation
Remote control $DOMO-DO7347H-Ceramic-Heater-FIG- $2$$

BEFORE THE FIRST USE

The heater should only be operated at a minimum distance of 50 cm from any wall or other object that could disturb its operation.
Position the air flow in order to optimize the heating of the room. Avoid corners, small volumes, floors, and ceilings.
Place the appliance on a smooth, stable surface.
When the appliance is switched on for the first time, a slight smell may be emitted. Please ensure sufficient ventilation. This smell will disappear very quickly.

REMOTE CONTROL
Before using the appliance with the remote control, a coin cell battery (CR2032) must be placed in the remote control. Follow the instructions below.

The remote control has a range of 5 meters.

USE
Before you use the appliance: plug in the appliance and turn on the on/off switch at the back of the device. The display displays the symbol and emits an audible signal to indicate that the device is in standby mode. You can set the appliance using the control panel, but also using the remote control. You can make the settings in the same way. The display will show you the selected settings. Each time a button is pressed, the device emits an audible signal to indicate that the user is making a setting or adjustment.

ON/OFF SWITCH
Push the on/off switch to turn on or off the appliance. “HI,” and the symbol appears on the display when the device is switched on. This means the device is at its highest power setting. If you switch off the device, the display will count down from 15 to 0 in order to cool itself down.

Note : when the device is switched off via this button, the device goes into standby mode. This means it is not completely disabled. You can only switch the device off completely via the on/off switch on the back of the device.

FUNCTION BUTTON

Press the button once: low power (1200 W): “LO” appears on the display, the device is now operating at its lowest power setting.
Press the button a second time: ECO: the symbol appears on the display. You can set the temperature between 5-35 °C as desired using the buttons to increase and decrease . You can also keep this button pressed until you reach the desired setting. If the ambient temperature is 2 °C higher than the set temperature, the device switches to standby mode. If the temperature falls back below the set temperature, the eco function switches on again. This is the most energy-efficient way to maintain the temperature.
Note : the device remembers the last temperature setting made. This means that when you switch the device on again, the last temperature setting appears on the display when eco mode has been selected.
Press the button for a third time: high power (2000 W): “HI” appears on the display, the device is now operating at its highest power setting.

TIMER

Push this button to set the timer ****. The symbol appears on the display.
You can set this between 1-8 hours using the buttons to increase and decrease . You can also press and hold this button until you reach the desired setting.
When the selected time has expired, the appliance will enter the stand-by mode and will no longer emit heat.

Note : if the device is in standby mode, you can set the timer. After the set time has elapsed, the device switches itself on automatically and will operate at its highest power setting.

OSCILLATION
Press the oscillation button to allow the heater to oscillate the air from left to right and vice versa. Press this button again to stop this. If you switch the device off with the on/off button, this function stops even if you have not pressed the oscillation button.

SAFETY DEVICES

This heater is protected with an overheat protection that switches off the heater automatically in case of overheat, e.g. due to the total or partial obstruction of the grids. The overheating shut-off switches off the temperature inside when the appliance exceeds the normal running temperature. The heating element will automatically stop working, the motor will continue to operate, and the internal heat shed. This protective device applies only to the appliance itself and has no influence on room temperature regulation. In this case, unplug the appliance, wait about 10 minutes for it to cool, and remove the object that is obstructing the grids. Then switch it back on as described above. The appliance should operate normally. Should the problem persist, please contact the nearest customer service.
The appliance is also equipped with a tip-over safety, which is integrated into the appliance. The appliance will turn off when it tips over.

ERRORS

E1 or E2 : there is a fault or failure in the temperature sensor. The buttons on the control panel are disabled. Contact the nearest support service.
FF: the ambient temperature is too high, you cannot make changes to any settings on the device. Switch off the device and place it in a cooler room.
E3: the device is equipped with tilt protection. The device will turn off when it falls over. The buttons on the control panel are disabled. Place the device on a flat, stable surface to enable it again.

CLEANING AND MAINTENANCE

Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely.
To avoid the risk of electric shock, do not clean the heater with water and do not immerse it. Clean the housing with a damp cloth.
If necessary, dust particles accumulated in the air outlet openings may be removed with a vacuum cleaner. This maintenance should be done regularly to ensure the good operation of the appliance. Dust particles in the appliance may cause overheating.
Store the appliance in a clean and dry place.

SPECIFICATIONS

Model identifier(s):

(indicative)

| Pmin| 1.2| kW| Manual heat charge control with room and/or outdoor temperature feedback| No
Maximum continuous heat output| Pmax| 2.0| kW| electronic heat charge control with room and/or outdoor temperature feedback| No
Auxiliary electricity consumption| —| —| —| fan-assisted heat output| No
---|---|---|---|---|---
At nominal heat output| max| N/A| kW| Type of heat output/room temperature

control

At minimum heat output| Elgin| N/A| kW| single-stage heat output and no room temperature control| No
In standby mode| else| 0.39| W| Two or more manual stages, no room temperature control| No
| | | | with mechanic thermostat room temperature control| No
| | | | with electronic room temperature control| Yes
| | | | electronic room temperature control plus day timer| No
| | | | electronic room temperature control plus week timer| No
| | | | Other control options
| | | | room temperature control, with presence detection| No
| | | | room temperature control, with open window detection| No
| | | | with distance control option| No
| | | | with adaptive start control| No
| | | | with working time limitation| No
| | | | with black bulb sensor| No
Contact details| Linea 2000 bvba

Dompel 9 – 2200 Herentals – Belgium

ENVIRONMENTAL GUIDELINES

This symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it must be brought to the applicable collection point for recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

$DOMO-DO7347H-Ceramic-Heater-FIG- $12$$ The packaging is recyclable. Please treat the packaging ecologically.