HYPERTECH PowerStay Insert Card Installation Guide

June 13, 2024
HYPERTECH

HYPERTECH Logo Quick Install Guide
READ BEFORE USING YOUR
HYPERTECH POWERSTAY

HYPERTECH PowerStay Insert Card

INTERNET UPDATEABLE

If you need to update your PowerStay, go to hypertech.com and click “Update Your Device” at the bottom of the homepage, and follow the instructions. Then connect your PowerStay to your Windows-based computer with the supplied USB cable that came in  your PowerStay box, then follow a few simple instructions. After the updating is complete, you can install the PowerStay into your vehicle.

HYPERTECH PowerStay Insert Card - Figure 1

  • Instantly & safely disable your vehicle’s Auto Start-Stop and/or V4 mode
  • Quick & easy installation. Plug the PowerStay in to the OBD-II diagnostic port under the driver’s side dash and drive your vehicle…That’s all there is to it
  • Re-enable either feature by unplugging the PowerStay from your vehicle

See Other Side For More Info >>

For technical assistance, email techsupport@hypertech.com or call 901.382.8888

HYPERTECH Logo 7375 Adrianne Place « Bartlett, Tennessee 38133
Office Hours: 8am – 5pm, Central Time, Mon. – Fri.
*Tech: 901.382.8888 Business: 901.385.1888 ¢ Fax: 901.373.5290
hypertech.com
Part #LIT126
12.22**

Documents / Resources

| HYPERTECH PowerStay Insert Card [pdf] Installation Guide
PowerStay Insert Card, PowerStay, Insert Card, Card
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals