OVERMAX Screen 100 Semi Automatic Screen User Manual
- June 13, 2024
- OVERMAX
Table of Contents
OVERMAX Screen 100 Semi Automatic Screen User Manual
Introduction
Dear customer!
Thank you for placing trust in us and choosing Overmax. Thanks to the use of
high-quality materials and modern solutions, we provide you with a product
perfect for everyday use. We are convinced that the product will meet your
requirements as it has been manufactured with utmost care. Before you use the
product, please read this operating manual carefully. Should you have any
remarks or questions concerning the product, please do not hesitate to contact
us: pomoctechniczna@overmax.pl
Important
Please read this manual before you start using the product to see its functions and use them in accordance with intended use.
- The screen must not be folded. Do not touch the screen surface with your fingers or hard items. Make sure the screen does not contact liquids.
- Use the device away from sources of heat, high temperatures, direct sunlight, sources of ignition and naked flame.
Description (fig. 1)
- Case
- Hook bracket
- Screen
- Lower slat of the screen
- Handle
- Black frame
How to assemble and use
-
Be careful when taking the screen out of the box. Make sure the screen and accessories are in a good condition.
-
To mount the screen on the wall, fasten brackets on screws. A suitable installation of the screen on the wall is presented in the fig. 2.
Fix the screws tightly and carefully to make sure they can bear a load of 25 kg. -
To mount the screen on the ceiling, hook the brackets, A suitable installation of the screen on the ceiling is presented in the fig. 3.
-
Install the case horizontally.
-
Take the screen out manually, be careful and gentle. Pull the screen upwards or downwards, never towards yourself. Stop taking it out when the black frame gets visible.
-
Install moving parts 25 cm above the floor.
-
The unrolled screen must hang freely and must not touch the floor.
-
After use, the screen should be slightly pulled downwards, then rolled up and put into the case.
How to clean and maintain
- Clean the screen with a soft cloth.
- Do not use cleaning agents.
- Do not use water to clean the screen.
- Wipe the case with a wet cloth.
- When you finish using, hide the screen to avoid dirt.
The pictures are for reference only. The real design of the products may differ from the pictures presented.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>