OVERMAX Ceiling Mount User Manual
- June 13, 2024
- OVERMAX
Table of Contents
Ceiling Mount
User Manual
Ceiling Mount
Introduction
Dear customer!
Thank you for placing trust in us and choosing Overmax.
Thanks to the use of high-quality materials and modern solutions, we provide
you with a product perfect for everyday use. We are convinced that the product
will meet your requirements as it has been manufactured with utmost care.
Before you use the product, please read this operating manual carefully.
Should you have any remarks or questions concerning the product, please do not
hesitate to contact us:
pomoctechniczna@overmax.pl
Important
Please read this operating manual before you start using the product to see
its functions and use them in accordance with intended use.
Note! The projector holder must only be installed on a concrete or brick
wall with the use of fixing bolts supplied. The holder can also be mounted on
the ceiling.
List of parts (fig. 1)
A – Head (x1)
B – Mounting plate (x1)
C – Guide (x1)
D – Connecting member (x1)
E1 – Long fixing elements (x4)
E2 – Short fixing elements (x2)
F – Hex key (x1)
G – Nut (x4)| H – Bolt M5x8 (x18)
J – Washer (x4)
K1- Bolt M4x12 (x4)
K2 – Bolt M3x10 (x4)
L – Screw anchor M6x60 (x4)
M – Wing nut M6 (x4)
N – Bolt M6x10 (x4)
---|---
How to assemble and install
Use the bolts supplied to screw connecting members and, depending on your choice, attach the holder to the wall (fig. 2) with the use of screw anchors (fig. 3). The holder can also be mounted on the ceiling.
- You can adjust the length and height of the holder by extending the guide (C). To do so, unscrew the bolt, adapt the length of the guide and screw back on.
- You can adjust the project holder position by changing the location of the head on the guide.
- You can also choose to install it without a guide, only with the mounting plate (B) (fig. 4).
- You can adjust the projector holder through short and long fixing elements (E1/E2).
- It is compatible with projectors with a smaller track of bolts (i.a. Multipic 3.5, Multipic 5.1) and larger track of bolts (i.a. Multipic 4.1).
- The lifting capacity of the holder is 20 kg.
How to clean and maintain
Wipe with a wet cloth.
The pictures are for reference only, The real design of the products may differ from the pictures presented,
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>