OVERMAX Tripod Screen 60 Projector Screen User Manual
- June 13, 2024
- OVERMAX
Table of Contents
Tripod Screen 60
User Manual
Tripod Screen 60 Projector Screen
Introduction
Dear customert
Thank you for placing trust in use and choosing Overmax.
Thanks to the use of high-quality materials and modern solutions, we provide
you with product perfect for everyday use. We are convinced that the product
will meet your requirements as it has been manufactured with utmost care.
Before you use the product, please read this operating manual carefully.
Should you have any remarks or questions concerning the product, please do not
hesitate to contact us:
pomoctechniczna@overmax.pl
Important
Please read this manual before you start using the product to see its functions and use them in accordance with intended use.
- Do not fold or bend the screen. Do not touch the screen surface with your fingers or hard items. Make sure the screen does not contact liquids.
- Use the device away from sources of heat, high temperatures, direct sunlight, sources of ignition and naked flame.
Description (fig. 1)
- slat
- Black frame
- Screen
- Case
- Stand
How to assemble and use
- Position the stand on a flat surface. The stand legs must be stable.
- Tochoose a suitable height of the case, release the lock, grab the handle on the stand and slide it upwards or downwards. When you achieve a desired height, lock it (fig. 2).
- Setthecasehorizontally, put the metal pin into the hole in the stand. Press the protection of the hole and release until it locks (fig. 3).
- Hook the screen handle at the top of the stand. When adjusting the screen height, slide the upper part of the stand slowly and carefully. Stop taking the screen out when black frame is utterly visible.
- Unscrew the clamp on the stand to adjust the screen height. Screw the clamp in if you have achieved a desired height (fig. 4).
- When you finish using, wrap the screen, hide in the case and remove from the stand.
How to clean and maintain
- Do not use water to clean the screen.
- Clean the screen with a soft cloth.
- Wipe the case and stand with a wet cloth.
- Do not use cleaning agents.
The pictures are for reference only. The real design of the products may differ from the pictures presented.