Skullcandy ANC 2 Wireless Over Ear Headphones User Guide

: June 13, 2024
: Skullcandy

Skullcandy ANC 2 Wireless Over Ear Headphones

Skullcandy-ANC-2-Wireless-Over-Ear-Headphones-product

Product Information

The product is a set of hangers designed to help you organize and store your clothes efficiently. The hangers are made of high-quality materials, ensuring durability and long-lasting use. With their sleek and modern design, they add a touch of elegance to your closet or wardrobe.

Product Usage Instructions

To hang clothes using the hanger, find the desired garment you wish to hang.
Hold the hanger with one hand and locate the hook at the top.
Place the hook over a closet rod or any other suitable hanging surface.
Once the hook is securely in place, choose the appropriate side of the hanger.
For shirts, blouses, or dresses with straps, use the hanger with the fel side.
For pants, skirts, or other bottoms, use the hanger with the le side.
Gently slide the garment onto the hanger, ensuring that it is centered and properly aligned.
Repeat steps 1-7 for each additional garment you wish to hang.
To remove a garment from the hanger, simply lift it off by sliding it in an upward motion.

Note: Avoid overloading the hangers with excessive weight as it may cause them to bend or break. Make sure to distribute the weight evenly across the hangers to maintain their integrity. Enjoy using our hangers to keep your clothes organized and wrinkle-free!

Download the skull-IQ App

$Skullcandy-ANC-2-Wireless-Over-Ear-Headphones- $1$$

Power On

$Skullcandy-ANC-2-Wireless-Over-Ear-Headphones- $3$$

Power Off

Pairing Mode

Pairing Mode

Play/Pause Answer/End

Reject Call

Volume Up

Volume Down

Crusher Presets and On/Off

Adjust Crusher Level

ANC/STAY AWARE

One Touch To Spotify

Find With tile

Charger Headphone

AUX Cable

Questions Visit: www.skullcandy.com

Speaker Driver: 40mm,
Impedance: 32 Ohms, THD <3%@50Hz -8KHz,
Voltage Regulation: 3.8V, Bluetooth V5.2,
Frequency Band: 2.402GHz – 2.480GHz,
Maximum Power: 11. 1dBm,
Weight: 332g.
Maximum operating temperature 45°C.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s), Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

FCC SAR Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

Warranty

Skullcandy products are backed by a 1-year warranty. If it doesn’t work the way we promised, we’ll make it right. For claims, questions, or Terms & Conditions: U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL All other countries: visit Skullcandy.com/support /international-support

Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed out wheeled bin symbol) in your bin. Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfill where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return to purchase location for recycling or disposal.

LIMITED WARRANTY- FOR SALES IN AUSTRALIA: Against defects for 1 year from the date of purchase. Product will be replaced or refunded at our option. At your cost, deliver product and Proof of Purchase to Skullcandy at 6 Grevillea st, Byron Bay, 2481, NSW, Australia. Ph +61 02 6639 5555. Further details at www.skullcandy.com.au or contact sales@skullcandy.com.au. Your benefits under this Skullcandy warranty are in addition to your other rights and remedies under a law in relation to this product. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Warning: To avoid hearina damade. do not listen at hiah volume levels.

DECLARATION OF CONFORMITY

SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby , Skullcandy International GmbH declares that the radio equipment type [Model: S6CAWI is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: skullcandy.eu/product- documents

CAUTION Risk of explosion if the battery is replaced by an incorrect type disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion ;leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas a battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.