INSIGNIA NS-MWPC5K-C 5 Watt Wireless Charging Pad User Guide

INSIGNIA NS-MWPC5K-C 5 Watt Wireless Charging Pad

Product Information

• Product Name: 5-Watt Wireless Charging Pad
• Model Numbers: NS-MWPC5K, NS-MWPC5KTP, NS-MWPC5K-C
• Compatibility: Any Qi-enabled devices up to 5 W, including smartphones, headphones, and smartwatches.
• Compatible with the latest iPhone, Samsung Galaxy, and Note devices.
• Features:
  • Front LED indicator
  • Back Micro USB port
• Specifications:
  • Qi wireless charging pad
  • Input: Micro USB 5 V/2 A
  • Wireless output: 5 W
  • Dimensions: 3.937 x 3.937 x 0.417 in. (95 x 95 x 10.6 mm)
  • AC power adapter:
  • Input: 100-240 V 50/60 HZ
  • Output: DC 5 V/2.4 A
• Charging cable: 4 ft. (1.2 m)

Product Usage Instructions

1. Connect the micro charging cable to the micro USB port on your charging pad.
2. Plug the other end of the USB cable into a USB wall charger, car charger, laptop, or desktop.
3. Place your Qi-enabled device on the center of your charging pad with the screen facing up. The LED indicator will turn blue to indicate that your device is charging.

LED Indicator Status

Note: If the LED is red, your device is not charging. Refer to the troubleshooting section for more information.

Troubleshooting

If you encounter any issues with your charging pad, follow these troubleshooting steps:

• Ensure that you are using the provided cable and power adapter that came with your charger. Using a different cable and adapter may decrease charging performance or damage your charger.
• If the LED indicator is blinking red, it indicates a charging error. Check the connection between the charging pad and your device, and make sure it is properly placed on the pad.
• If the LED indicator is solid red, it means there is insufficient input power. Make sure the USB cable is securely connected to a power source with sufficient output.

For more detailed information, please refer to the user manual available at https://manual-hub.com/.

Safety Information

Follow these safety precautions while using the product:

1. Do not attempt to disassemble the product as it may result in a short-circuit or damage.
2. Keep the product in a dry and ventilated environment. Avoid storing it in areas with high humidity and temperature.
3. Do not use organic solvents to clean the product.

This product is covered by a one-year limited warranty. For warranty details, visit www.insigniaproducts.com.

Contact Insignia for further assistance:

• U.S. and Canada: 1-877-467-4289
• Mexico: 1-800-926-3000
• Website: www.insigniaproducts.com

PACKAGE CONTENTS

NS-MWPC5K / NS-MWPC5K-C

• 5 W Qi Certified Wireless Charging Pad (1)
• 4 ft. (1.2 m) charging cable (1)
• USB power adapter (1)
• Quick Setup Guide

NS-MWPC5KTP

• 5 W Qi Certified Wireless Charging Pad (2)
• 4 ft. (1.2 m) charging cable (2)
• USB power adapter (2)
• Quick Setup Guide

FEATURES

• Low-profile design for easy placement and reliable charging
• Wireless design charges without cumbersome cords
• 5 W output provides standard charging speeds to Qi-compatible devices
• Blue LED shows that your device is charging

COMPATIBILITY

Any Qi-enabled devices up to 5 W, including smartphones, headphones, and smartwatches.
This includes the latest iPhone, Samsung Galaxy, and Note devices.

PRODUCT OVERVIEW

USING YOUR CHARGING PAD

1. Connect the micro charging cable to the micro USB port on your charging pad.
2. Plug the other end of the USB cable into a USB wall charger, car charger, laptop, or desktop.
3. Place your Qi-enabled device on the center of your charging pad with the screen facing up. The LED is blue when your device is charging.

Note: If the LED is red, your device is not charging See “TROUBLESHOOTING” for more information.

LED INDICATOR STATUS

TROUBLESHOOTING

The device not charging/LED is red

Device charges slowly

• Your device may charge more slowly with the charging pad than a charging cable. This is normal behavior.
• Make sure that your device is positioned in the center of your charging pad.
• CAUTION: Only use the cable with the attached power adapter that came with your charger.
• Using a different cable and adapter can decrease charging performance or damage your charger.

SPECIFICATIONS

Qi wireless charging pad

• Input: Micro USB 5 V/2 A
• Wireless output: 5 W
• Dimensions: 3.937 x 3.937 x 0.417 in. (95 x 95 x 10.6 mm)

AC power adapter:

• Input: 100-240 V 50/60 HZ
• Output: DC 5 V/2.4 A
• Charging cable: 4 ft. (1.2 m)

FCC Information

FCC Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference,
2. this device must accept any interference received, including interference that may cause undesired operation.

RSS-Gen statement: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference;
2. This device must accept any interference, including interference that may cause undesired operation of the device.

RF exposure statement:

This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. This device must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with radio frequency exposure limits set forth by the Innovation, Science and Economic Development Canada for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the device and the user or bystanders. This device must not be co-located or operating in conjunction with any other antenna or transmitter.

SAFETY INFORMATION

1. Do not attempt to disassemble the product. It may result in short-circuit or damage.
2. The product should be kept in a dry and ventilated environment.
   • Do not store it in an area of high humidity and high temperature.
3. Do not use an organic solvent to clean the product.

ONE-YEAR LIMITED WARRANTY

• Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA:

• 1-877-467-4289 (U.S. and Canada)
• 1-800-926-3000 (Mexico)
• www.insigniaproducts.com
• INSIGNIA is a trademark of Best Buy and its affiliated companies
• Distributed by Best Buy Purchasing, LLC
• 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
• ©2020 Best Buy. All rights reserved.
• Before using your new product, please read these instructions to prevent any damage.

References

• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>