Rubisolis FEELSPOT Smart WI-FI LED STRIP User Manual

Rubisolis FEELSPOT Smart WI-FI LED STRIP

Product Information

The Smart WI-FI LED STRIP is a versatile lighting solution that allows for easy control and customization. It comes with various parameters and features to suit different lighting needs. The package includes a power supply, controller, and light strip. The LED strip is compatible with Android 4.0 and IOS 8.1 or higher versions.

Parameters:

• Colour: RGB/RGB+W/RGB+CCT
• Input Voltage: 12/24Vdc
• Power: 7.2W/M

Controller Introduction:

The controller allows for convenient control of the LED strip through a mobile app. It supports features like switching scenes,closing the device, and restoring factory settings. The app can be downloaded by searching for “Smart Life” on the App Store or Google Play. Alternatively, users can scan the QR code provided on the label or user manual.

Features:

1. WIFI connect, mobile phone APP control for Android and IOS
2. Voice and intelligent speaker control
3. Timer switch
4. Full range of RGB/RGB +W/ RGB+CCT available
5. 1-100% stepless dimming
6. Remote controllable after connecting to the internet

Product Usage Instructions

Installation Instructions:

1. Use a DC12/24V power supply.
2. Properly install the WIFI controller using 3M tape to fix it in place.
3. Check and ensure that the power supply, WIFI controller, and LED strip are connected correctly.
4. If the LED strip is flashing, it means it is in distribution network mode and ready to connect.
5. If the LED strip is not flashing, try turning the power on and off three times or long press the button for 5 seconds.

Attentions:

1. Avoid placing any metal near the WIFI controller to prevent WiFi signal blockage.
2. Ensure proper connection between the power supply and controller.
3. The power supply output voltage should match the LED strip’s working voltage.
4. Double-check the connection before powering on.

Log in/Registered Account Number:

To use the Smart Life APP, either sign up for a new account or log in with an existing account.

APP Connection:

1. Make sure the LED strip is turned on and the WIFI signal is strong and stable.
2. The LED strip will flash when the power supply is turned on.
3. Add all devices on the APP and enter the lighting device interface to match the LED strips.
4. If the LED strip doesn’t flash, long press the Reset button for more than 5 seconds. While the LED strip is flashing, enter the APP’s lighting device interface to match the LED strips.
5. Ensure that both the phone and controller are connected to the same WIFI environment.
6. Make sure the WIFI is in 2.4G signal mode.
7. Select the Wi-Fi network connected to the smart device, enter the WiFi password, and click OK to wait for the matching process to succeed.

Functions:

1. White: Start the White Ring Interface and adjust the CCT (Correlated Color Temperature) and Brightness.
2. Color: Start the Color Ring Interface and adjust the RGB color, Brightness, and saturation.
3. Scene: Start the Scene interface, which offers different scene modes to choose from.
4. Music: The lights flicker to the rhythm of the music.

Third Party Control:
In the Smart Life APP, users can explore additional services in the Me menu, including voice services (Alexa/Google Assistant) and other services. Follow the operation guide to connect to third-party service devices.

Open up a better world with the Smart WI-FI LED STRIP!

Parameters

Wriing diagram

Includes power supply, controller and light strip.

Controller introduction

1. Short press to switch scenes
2. Double click to close the device
3. Long press to restore factory Settings

Download APP

1. Search “Smart Life” from App store or Google play.
2. Scan the QR code from the label or user manual.

The APP is compatible with Android 4.0 and IOS 8.1 and higher version

Features

1. WIFI connect, mobile phone APP control, Android and IOS support.
2. Voice and intelligent speaker control
3. Timer switch.
4. Full range of RGB/RGB +W/ RGB+CCT available .
5. 1-100% stepless dimming
6. Remote controllable after connecting to internet.

Installation instructions

1. Use DC12/24V power supply.

2. Install the WIFI controller correctly.
   Use 3M tape to fix it

3. Check and ensure the power supply, WIFI controller and LED strip are connected correctly.

4. When the LED strip flashes, enter the distribution network mode, and keep flashing state when connected.

5. If the LED strip is not flashing, tunr the power on and off three times or long press the button for 5 seconds.

Attentions

1. Do not put any metal around the WIFI controller, which could blocked WiFi signal.
2. Ensure power supply and controller are connected correctly.
3. The power supply output voltage should be same as LED strip working voltage.
4. Ensure the connection is correct before powering.

Log in/ Registered account number
Open the Smart Life APP, sign up for a new account or log in with an existing account.

APP connection

1. Preparation: Turn on the LED strip and enter the home of APP while ensure the WIFI signal is good and stable.
2. LED strip will flashing when turn on the power supply. Add all devices on the APP and enter adding lighting device interface, match LED strips.
3. If the LED strip is not flashing when turn on the power supply, long press the Reset button for more than 5 seconds. While LED strip flashing, enter the APP adding lighting device interface, match LED strips.
4. Please confirm that the phone and controller are in the same WIFI environment;
5. Please confirm that WIFI is in 2.4G signal mode;
6. Select the Wi-Fi connected to the smart device, input the WiFi password, and then click “OK” to wait for the matching to succeed.(Make sure smart devices share the same WiFi)

Functions

1. White: Start the White” Ring
   Interface, and adjust the CCT and Brightness

2. Color: Start the “Color” Ring
   Interface, and adjust the RGB color and
   Brightness, and you can also change the saturation of the color

3. Scene: Start the “Scene” interface, in which there are different scenes mode to choose from.

4. Music:The lights flickered to the music.

APP function introduction

Click the interface to control it according to the specific mode of the specific LED strip.The following is public function introduction.

1. Remote control: The LED strip can be controlled anywhere after the smart device is successfully connected.
2. Timer function: Set the timer to turn on and turn off the LED strip.
3. Intelligent scene: The system sets a variety of intelligent scenes, and different scenes correspond to different lighting atmospheres.
4. Group: Group control is available (only for the same type of product).
   Family room management.
   Device Sharing: The device is shared with other user control devices in the home.

Third-party control
In the Smart Life APP: Find more service in “Me” menu, click to enter “voice service”(Alexa/ Google Assistant) and other services, click on the service you need.
Connect to the third-party service device according to the operation guide.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>