SunTouch PMSP-100 Pro Melt Smart Panel Instruction Manual

June 13, 2024
SunTouch

ProMelt® Smart Panel
ProMelt PMSP-100 and PMSP-200 PanelsSunTouch PMSP-100 Pro Melt Smart
Panel

WARNING
Read this Manual BEFORE using this equipment.
Failure to read and follow all safety and use information can result in death, serious personal injury, property damage, or damage to the equipment.
Keep this Manual for future reference.

The ProMelt Smart Panel now offer integrated Wi-Fi control built in, to allow you to access your system from anywhere, anytime with the Watts Home App. Simplified installation process with easy connections and integrations.

Installation

Wiring CP series panels

  1. Provide 120, 208, 240, 277 VAC circuits to the panel dcontactor(s) Line1 and Line2 terminals as required by the d rating of the ProMelt snow melting mats/cables connected tothis circuit.
  2. Provide 120 VAC for the ProMelt Smart Controller.
  3. Make wire connection between the Load1 and Load2 terminals and the ProMelt mats/cables. More than one mat/cable intended to be connected to the same contactor should first be connected together in parallel at a junction box.  Then run lead wires to the terminals.

Wiring ProMelt Smart Panel to the PMSub-200 extension panel
A PMSub-200 panel can be used in conjunction with another panel to serve as an “extension panel”. This subpanel then turns on at the same time as the main panel. Up to four subpanels can be added. Follow the steps below for proper installation:

  1. Wire the PMSub-200 extension panel in the same manner as the main panel (see steps 1 and 3 above).
  2. Use 18 AWG wire to connect “Melt 120V” and “N” between panels.

Call customer service if you need assistance with technical details.

CONTROL DESCRIPTIONS

CONTROL ORDER # DIMENSIONS
PMSP-100 81021020 20″ x 12″ x 8 7⁄8″
PMSP-200 81021021 20″ x 12″ x 8 7⁄8″

PMSub-200
(no controller)| 81021022| 20″ x 12″ x 6″

Operation

Once all wiring connections have been completed, the sensor and ProMelt mats/cables have been fully installed, and any inspections made as required per local code, energize the circuit breaker(s) supplying the panel.
Refer to the IOM for the ProMelt Smart Controller.

https://www.suntouch.com/dfsmedia/0533dbba17714b1ab581ab07a4cbb521/158591-source /iom-st-promeltsmartcontroller

NOTICE
Do not manually energize the ProMelt mats/cables with outdoor temperatures above 68°F (20ºC) except for a brief test up to 10 minutes in duration. Damage to the mats/cables or slab/surface materials may result.

SunTouch PMSP-100 Pro Melt Smart Panel - Figure 1

Line1, Line2 120,208,240,277 VAC 12 AWG (Minimum)
120V, N 120 VAC 14 AWG
Contactors 50A Resistive load

Compatible
Sensors
| Outdoor Sensor (provided)| 18 AWG
090
095
072
Approvals| File E483460,
UL 508A,
CAN/CSA-C22.2 No. 14 CSA
C US, meets class B: ICES &
FCC Part 15|
Environment| Indoor, NEMA 1 enclosure, operating temperature
-4°F to 122°F (-20°C to 50°C)
< 90% RH non-condensing|

SunTouch PMSP-100 Pro Melt Smart Panel - Figure 2

Limited Warranty: SunTouch (the “Company”) warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
THE WARRANTY SET FORTH HEREIN IS GIVEN EXPRESSLY AND IS THE ONLY WARRANTY GIVEN BY THE COMPANY WITH RESPECT TO THE PRODUCT. THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESS OR  IMPLIED. THE COMPANY HEREBY SPECIFICALLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  FOR A PARTICULAR PURPOSE.
The remedy described in the first paragraph of this warranty shall constitute the sole and exclusive remedy for breach of warranty, and the Company shall not be responsible for any incidental, special or consequential damages, including  without limitation, lost profits or the cost of repairing or replacing other property which is damaged if this product does not work properly, other costs resulting from labor charges, delays, vandalism, negligence, fouling caused by foreign  material, damage from adverse water conditions, chemical, or any other circumstances over which the Company has no control.
This warranty shall be invalidated by any abuse, misuse, misapplication, improper installation or improper maintenance or alteration of the product.
Some States do not allow limitations on how long an implied warranty lasts, and some States do not allow the exclusion or limitation of incidental or consequential damages. Therefore the above limitations may not apply to you. This  Limited Warranty gives you specific legal rights, and you may have other rights that vary from State to State. You should consult applicable state laws to determine your rights. SO FAR AS IS CONSISTENT WITH APPLICABLE STATE  LAW, ANY IMPLIED WARRANTIES THAT MAY NOT BE DISCLAIMED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE  YEAR FROM THE DATE OF ORIGINAL SHIPMENT.

USA: T: 888-432-8932SunTouch.com
Canada: T: 905-332-4090
Latin America: T: (52) 55-4122-0138
© 2023 Watts

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals