WOLF 2x4VW 2 Input and 4 Output Video Wall Controller with TV Rotation User Manual

User Manual
Wolf Pack 2-Input & 4-Output Video Wall Controller
with TV Rotation
SKU: 2x4VW
Version: V22.01

Introduction

This Wolf Pack 2-Input & 4-Output Video Wall Controller with TV Rotation is designed to be a truly capture, AD convert, route, distribute all-format signal to the video wall(LCD displays), while maintaining a true digital signal. The controller with many different video interfaces, include 2 inputs(HDMI+DP) with up to 4K60 resolution and 4 HDMI outputs with 1080P resolution and 3.5mm audio output. Supports different Video Wall modes, 1×2, 1×3, 1×4, 2×2 etc, with the 4K input and 1080P output, it can realize the point to point(pixel to pixel) display.
This controller can be controlled by remote control, front buttons and RS232 commands. .

Features

➢ Supports 2 inputs, resolution up to 4K60
➢ Outputs support image 90, 180 and 270 degrees rotation
➢ Supports 4 HDMI with 1080P60 resolution outputs
➢ Supports multiple splicing ways: 2×2, 1×4, 4×1, 1×3 …
➢ Supports the splicing edge adjustment
➢ Supports HDMI 2.0, HDCP compatible
➢ Supports the IR remote, push-button control and RS232 commands

Specification

Product name| WolfPack 2-Input & 4-Output Video Wall Controller with TV Rotation
---|---
Control| Front buttons, remote control, RS232 commands
Input| 1 HDMI, 1DP
Output| 4HDMI, 13.5mm audio
Resolution| Input:
1920X1080,1920X2160,1920X3240,1920X4320,3840X1080,3840X2160,5760X1080, 7680X1080
Output: 1080P60Hz
Display splice mode| 2×2, 1×4, 4×1, etc…
Power Supply| DC 12V3A
Power Consumption| 10W
Dimension (WxHxD)| 22310427mm
Weight| 2.5KG/ 5.5lbs
Operating Temperature| -10℃ to 50℃
Storage Temperature| -25℃ to 55℃

Packing

Panels

5.1 Front Panel

OFF/ON: power switch
I R : for the IR remote control
POWER: power switch
IN1: The HDMI input indicator
IN2: The DP input indicator
OUT1~4: The 4 HDMI outputs indicators
IN1: For selecting the HDMI input
IN2: For selecting the DP input
H+: For the horizontal bezel increase
H-: For the horizontal bezel decrease
V+: For the vertical bezel increase
V-: For the vertical bezel decrease
UPGRADE: for the firmware upgrading

5.2 Back Panel

INPUT: 1 HDMI input, 2 DP (only one to output at time)
OUTPUT: 4 HDMI outputs to connect to displays
AUDIO OUT: for the audio de-embedded
RS232: female DB9 port for commands control
DC 12V: power supply

Diagram and control operations

6.1 Connection diagram

6.2 IR remote control

• The other gray buttons on this remote control is for the HDMI multiviewer
  IN1, IN2: when 2 inputs connected, users can press the IN1 for HDMI or IN2 for DP to output
  RESET: Press to reset when want to reset the bezel correction, output ports flip/rotating.
  SPLICING MODES: quick setup buttons for users to set the video wall
  ROT1: For HDMI output 1 flipping, need to press reset button when want the normal display.
  ROT2: For HDMI output 2 flipping, need to press reset button when want the normal display.
  ROT3: For HDMI output 3 flipping, need to press reset button when want the normal display.
  ROT4: For HDMI output 4 flipping, need to press reset button when want the normal display.

BEZEL H+, H-: For the video wall horizontal bezel corrections(Reset button to back or 100 hits)
BEZEL V+, V-: For the video wall vertical bezel corrections(Reset button to back or 100 hits)

6.3 RS232 commands control

After-Sales

7.1 Warranty Information
The Company warrants that the process and materials of the product are not defective under normal use and service for 2 (2) years following the date of purchase from the Company or its authorized distributors.
If the product does not work within the guaranteed warranty period, the company will choose and pay for the repair of the defective product or component, the delivery of the equivalent product or component to the user for replacement of the defective item, or refund the payment which users have made.
The replaced product will become the property of the Company.
The replacement product could be new or repaired.
Whichever is longer, any replacement or repaired of the product or component is for a period of ninety (90) days or the remaining period of the initial warranty. The Company shall not be responsible for any software, firmware, information, or memory data contained in, stored in, or integrated with the product repaired by the customer’s return, whether or not during the warranty period.

7.2 Warranty limitations and exceptions
Except above limited warranty, if the product is damaged by over usage, incorrectly use, ignore, accident, unusual physical pressure or voltage, unauthorized modification, alteration or services rendered by someone other than the Company or its authorized agent, the company will not have to bear additional obligations. Except using the product properly in the proper application or normal usage

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>