THE LITTLE CAT B612 Cat Planet Instruction Manual

**THE LITTLE CAT B612 Cat Planet Instruction Manual

**

You have to WATCH the VIDEO before start assembling.

B612 Cat Planet™ Assembly Guide Video

https://www.thelittlecat.kr/en/b612-assembly

Please Read before starting assembly.

• Put the parts in the flat place and assemble them.
• Assembly according to the order in the assembly manual.
• Do not apply excessive force. Permanent damage to the product may occur or It may cause injury.
• During assembly, If a child or a pet cat is nearby, it can cause injured.
• When fastening the screw, It is recommended to use Screwdriver or Electric Screwdriver. And all screws must be tightened until they do not rotate further.
• The LED cover is an elastic product that can be stretched or shrunk depending on the surrounding environment.
• The contents of the manual may be revised later, so please refer to the URL written above.

Product Components – Hardware & Parts (1/2)

How to Assemble

Wheel Base Positioning

After the joint connections of the wheel base are completely assembled, proceed to the next process.

Wheel Base Connection Assemble

Start fastening from the bottom to the top.

Connection Assemble – Screw tightening

Screws must be tightened until they do not rotate further.

Connection Assemble – Fitting Cover

Screws must be tightened until they do not rotate further.

Attach the LED line light

Remove the protective tape(Red color) on the back of the LED line and attach it.

Fit LED Silicone Cover

Make sure that the cover fits into the groove. If it doesn’t fit well, press with hard things.

Attach the Velcro Tape

Attach the gaps in the connections of each Velcro line so that they do not overlap.

Attach the inner Mat

Attach the gaps in the connections of each inner mat so that they do not overlap.

CONFIRMATION after assembly

into the groove. If you pull the LED cover too hard and put it, it may come off again during cat riding.
Shrill Noise is generated| Clean the Wheel rail of the Wheel Base to remove foreign substances. Make sure that the bearing part of the Wheel cradle is excessively tightened.
Dull Noise is generated| Make sure the parts are fully engaged. (ex. Wheel Deco Cover-Wheel Base)
Wheels move heavily| Make sure there are foreign object debris stuck between the Wheel Cradle and the Wheel Base. Make sure that the bearing part of the Wheel cradle is excessively tightened.
Inner mat easily come of| Check the attachment location of the Velcro tape. If the Inner mat is pulled too much and attach it, it may come off again later.

Installation

Installing the appliance

1. Place the floor mat evenly on the level surface.

2. Place the wheel-stand on the floor mat.

3. Carefully place the main wheel on the wheel-stand. Make sure each tendon the main wheel exactly matches the wheel-stand.

4. Check the LED lights are properly lit when the cat wheel rotates.

App Installation and Sync

Search ‘the Little Cat’ app or scan the enclosed QR code in our paper manual to download the app.

How to use

Turn on the device

1. Open the charging silicon pad over.
   

2. Press the silicon part under the charge button(reset button, invisible)
   

3. Check that the LED indicator lights up.
   

4. Close the charging silicon pad cover.
   

If the reset button doesn’t work?

Open the packing slightly and press the button!

Application integration

Turn on Bluetooth on your smartphone and run the app.

Select the catwheel model name in the app and link it with your smartphone.

Ifit still doesn’t work, check that the Bluetooth button on the right side of the main screen is turned on.

ON

OFF

Main Screen

1. Cat Information Registration
2. LED Setting
3. Exercise Tracking
4. Battery/sleep mode management
5. Bluetooth On/Off
6. light position shift
   

Cat Information Registration

1. cat photo registration
2. cat profile – Enter the cat’s name and date of birth
3. Learn the Cat BCS (Body Condition Score) Enter information such as Rib cage, Lower leg, Body weight, etc.
4. Save
   Enter and save the above body dimensions, Enter your cat’s body mass index (BCS) right away by entering the information above.
   

LED Setting

1. Free choice of colors on the color wheel
2. OFF – Color off
3. Color changes randomly
4. Swing – 1st color s fixed, 2nd coloris blinking
   

If the cat does not ride the wheel and the wheel is stationary, the LED will go out, but this is not a bad product. When the wheel moves again, a light will appear.

Exercise Tracking

The app tracks the amount of exercise that the cat has done with the wheel, based on the number of rotation. The exercise data is recorded on daily, weekly and monthly basis.

1. Traveled Distance
2. Number of B612 Planet Rotation
3. Today’s Burnt Calories
   

Sleep mode settings

1. Battery – Check battery status
2. Cat treadmill Firemware update Device version update history
3. Cat treadmill Device Serial Number When the serial number is ‘touched six times, it is set to sleep mode.
4. Update
   Device update button
   

Cancel sleep mode

How to wake up from sleep mode – power on (reset) 7P

Charging method

Open the silicone pad cover inside the cartwheel.

Plug in the magnetic charging cable.

When the catwheel is used while charging with magnetic charging cable, the charge naturally stops.

How to clean and care

• When rotating noise occursin the product, apply oil to the rail part of the cat wheel.
• Ifthere is foreign matter on the inner mat of the catwheel, separate it from the product and drycleanit (Please note that shrinkage may occur)
• When drying the mat, let it dry naturally under the shade instead of drying with warm air.
• When removing the inner mat, do not remove the attached damage warning sticker. A/S is not possible if the sticker is damaged.

Maintenance Checklist

Please check the following list before contacting the customer support.

Safety Caution

Installation

• Install your appliance on level and hard floor that can support its weight. Uneven surface may cause vibrations, noise, or malfunction of the appliance.
• Do not install this appliance near a heater, inflammable material.
• Do not install this appliance in a humid or location exposed to direct water. This may cause electric shock or fire.
• Please protect the charging cable/charging port’s silicone lid from being chewed or damaged by pet. this may cause electric shock.

Cleaning

• Do not use benzene, thinner or alcohol to clean the appliance. This may result in discoloration, deformation, damage, electric shock or fire.
• Before cleaning or performing maintenance, unplug the charging cable from the power supply. This may cause electric shock or fire.

Using

• Do not ride the wheel. This may cause injury or malfunction(Please take extra caution to prevent children from riding this appliance)
• Please be cautious of pet’s leg getting stuck with the appliance. Please be cautious of children’s hand getting stuck in between the main wheel and stan. This may cause damage and malfunction.
• Do not strike, pull or shake the appliance with excessive force. This may cause injury or malfunction of the appliance.
• Do not place an object on or under the appliance. This may cause malfunction, damage or transform of the appliance.
• This may cause injury, malfunction, electric shock or fire, and will not be able to receive a further customer service.

If the appliance if not operating properly or damaged, stop using the appliance and contact the customer service.

Customer Service Policy

• Within the 12 months after the purchase, a repair or replace of the product at no-charge is guaranteed.

Specification

+PE+PET) Floor Carpet(PA+PE+PET+Silicone)
Spin speed| T2rpm, 15km/h
LED| Full Color
Power| 5V, Wired magnetic adapter(ver.1.0)
Communication| Bluetooth
Control| ‘the Little Cat’ App(Android, 10S)
Warranty| 12 months

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>