Cassia S1000 Software Development Kit User Guide

June 13, 2024
Cassia

Cassia S1000 Software Development Kit

INSTALLATION INSTRUCTION

Step One – Associate your Bluetooth router with the Cassia IoT Access Controller (AC)

  • Connect your router and your PC to the same local network
  • Install a port scanner like “Advanced IP Scanner” on your PC to find the IP address of your router, see Figure 1.
  • Access your Bluetooth router (AP) by entering its IP address in a web browser, see Figure 2.
  • In the Common section, please enter your Developer Key and AC Address.

Step Two – Access the Cassia IoT Access Controller (AC)

  • Enter the IP address or domain name of your AC into the address bar. For example, http://demo.cassia.pro
  • Input the user name and password, then click Login. See Figure 3 below.

Step Three – Change the settings of Cassia IoT Access Controller (AC)

  • Input your Developer Key, Developer Secret, and License as indicated in Figure 4 below.

Step Four – Add Bluetooth router (AP) to AC routers list

  • Navigate to the Routers page, as shown in Figure 5 below.
  • Click “Routers -> Discover AP”, AC will identify all Bluetooth routers in its network and display them in the table.
  • Check the routers you want to add, then click “Add” button.
    • Note: You can select multiple routers and add all of them to be managed under the AC, see Figure 6.
  • User your router’s MAC address to identify it on the list of discovered devices.
    Note: Your router’s MAC address is located on the bottom of the router, as noted in Figure 7 below.

Step Five – Configure the Bluetooth Router (AP)

  • To configure a router, check the checkbox next to the desired router and click the Edit button as seen on Figure 8.
  • Locate the Common Settings tab as shown in Figure 9 below to set Developer key.
  • Make sure to enter the same Developer Key as your AC. If the AC Address field is empty, please enter your AC domain name or IP address, for example, demo.cassia.pro.
  • Configure network settings from the Networks tab

CONNECTION OPTIONS – The Cassia Bluetooth Router supports the following networking uplinks:

  • Wired (Ethernet) – you can set the router to use a static IP address or DHCP
  • Wireless (Wi-Fi) – enter your Wi-Fi SSID and password, then click Save. The router will go offline briefly and then come back online.
  • 3G/4G dongle – Cassia currently supports two cellular dongles: ZTE MF823 in China and AT&T AirCard 313U in the US

Important: When two or more network connections are activated, you can set priority levels for the networks. By default, the priority is Wired > Wireless > Cellular (3G/4G).

Step Six – Upgrade the router

  • Upload firmware image to AC
  • Navigate to Firmware on side navigation menu and click “Add from Local” button. See Figure 10 below.
  • From there, select a firmware image from your PC and upload it to the AC.
  • Use AC to upgrade router(s)
  • Navigate to Routers on side navigation menu, select the router(s) that need to be upgraded, and click the Upgrade button. See Figure 11.
  • From the text box, choose a Firmware version you want to upgrade to, then click OK. See figure 12 below.
  • The AC will finish the upgrade for all of the routers you have selected.
  • 2015-2017 Cassia Networks®

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals