JVC Wireless Sweatproof Gumy Sport Bluetooth Wireless Earbud Nozzle User Guide

JVC Wireless Sweatproof Gumy Sport Bluetooth Wireless Earbud Nozzle

Specifications

• BRAND: JVC
• COLOR: Mint Green
• CONNECTIVITY TECHNOLOGY: Bluetooth
• MODEL NAME: HAEN10BTZ
• FORM FACTOR: In Ear
• PRODUCT DIMENSIONS: 1.18 x 2.76 x 7.17 inches
• ITEM WEIGHT: 2.29 ounces
• BATTERIES: 1 Lithium Ion battery

Introduction

Ideal for Sports, Colorful Gumy Sport Bluetooth Wireless Headphones Mint Green In-Line 3-Button Remote with Mic A 5-hour battery and Nozzle Fit earpieces provide a secure and comfortable fit.

HOW TO TURN UP THE VOLUME

Press the R earphone’s button twice fast to increase the volume. Press the L earphone’s button twice fast to reduce the volume.

HOW TO SETUP

1. Reposition the earbuds inside the case after picking up both of them and removing the adhesive. Pick them up once more to turn them on.
2. Search for JVC HA-A17T on the device, then press to connect. Once linked, earbuds turn themselves on when removed from the case.

HOW TO PAIR

1. For around three seconds, press and hold the buttons on the left (L) and right (R) headphones.
2. The L and R earphones switch on their power. Release your fingers from the buttons when the L indicator begins to rapidly alternate between red and white (or when you hear the spoken message “Pairing mode”).

HOW TO SKIP SONGS

The music will be skipped with two taps. The music will start over at the beginning with a triple tap.

HOW TO ANSWER A CALL

I take the call. When you get a call, immediately press the button once. Calling the call off During the call, swiftly press the button once. ignoring a call When an incoming call comes in, hold the button down continuously for approximately a second or so until you hear a beep. When you hear the beep, let go of your finger.

HOW TO RESET

• To switch off the power, press the button on both earbuds.
• For around 20 seconds, press and hold the L earphone’s button.
• For around 20 seconds, press and hold the R earphone’s button.
• Put the charging case with the two earphones inside, then remove them.

HOW TO CHARGE

• Slide the charging case open.
• Adjustably and securely insert the L and R earbuds into the charging case. While charging, the earphones’ red indicator illuminates and the white indicators on the charging case flash or light up.

Frequently Asked Questions

How can JVC headphones tell when they are fully charged?

The earphones’ indicators will turn off after charging is finished. The earphones take around 2 hours to charge. The power of the earphones will automatically cut off once they are placed into the charging case.

Why are the red flashes on my JVC headphones?

The System and the BLUETOOTH device are not connected when the light remains slowly blinking red. To connect, choose System on the Bluetooth device in this scenario.

Why just one ear of my Bluetooth headphones works?

Depending on the audio settings on your headset, it might only play in one ear. So, make sure the mono option is off in your audio properties by checking your audio properties. Make sure the voice levels on both earbuds are balanced as well.

How do earbuds change the song?

To play the next track, tap and hold the right earphone for two seconds. To play a previous track, tap and hold the left earbud.

How can I modify the music playing on my Bluetooth headphone?

To skip to the beginning of the following track/beginning of the preceding (or current) track, press and hold until you hear a beep. To skip to the beginning of the next or previous track and hear a beep, push the button again within one second of releasing it (you can repeat this operation).

How can I activate my wireless JVC headphones?

Press and hold the button for three seconds until the red and blue indicators alternately flash. Press and hold the button for 5 seconds or until the red and blue indicators alternately flash. 3 the Bluetooth device’s Bluetooth feature should be enabled. 4 Choose “JVC HA-S20BT” from the available devices.

Has the JVC Gumy wireless headphone a microphone?

These True Wireless Gumy earphones are colorful, portable, and light weight. They are waterproof (IPX4) and come with a little charging bag. You can take calls while you’re moving, change the volume, and change tracks with the remote control and built-in microphone. Five current colors are offered for these earbuds.

Why does just one of my JVC earbuds work?

Turn on the system after recharging it. Take both earphones out of the charging case, then put them back. A full insert into the charging case for the earphones is a must. To clean the earphones’ and charging case’s contacts of any debris, use a cotton swab.

How can I simultaneously connect both earbuds?

Press the buttons on top of the earbuds twice fast and simultaneously to sync them. They should begin to pulse or breathe in blue and then begin flashing (searching for a device). Turn off your Bluetooth and remove the earbuds from their case.

Why do my JVC earbuds frequently lose power?

We previously discussed how low battery levels might degrade the audio quality and result in audio skips. To prevent this, make sure your Bluetooth headphones and the device they are attached to are both at least 30 percent charged.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>