MOZA Mini MX 2 Professional Camera Gimbal Stabilizer User Manual

: June 6, 2024
: Moza

MOZA Mini MX 2 Professional Camera Gimbal Stabilizer User Manual

Mini MX 2 Overview

Note: Please activate MOZA Mini MX 2 with MOZA Genie App before the first use. Otherwise, normal working functions may be limited.

Download APP

You can scan the QR code to download the “MOZA Genie” directly, or you can search the “MOZA Genie” in the APP store & Google Play to download it.(scan the QR code below to
download the APP)

The customized “MOZA Genie” APP for Mini MX 2 can help you make better use of the various functions of the gimbal.
Please routinely check for the latest version of the MOZA Genie app. Make sure you have set to automatic update on your mobile smartphone.

Installation and Unlocking

Follow the steps shown in the pictures below and unlock the gimbal.

Phone Holder Operation

Power on and install the phone
Long press the power button to turn on the stabilizer. The phone holder will open automatically.
Place the phone in the center of the phone holder, the phone holder will clamp automatically when a mobile phone is sensed.

Power off and remove the phone

First press the trigger button and hold, while long press the power button, the phone holder will open automatically.
Then remove the phone, the phone holder will close and gimbal will turn off when it no longer sense the phone.

Phone holder operation

Press and hold the trigger button and “+” button: The phone holder will open
Press and hold the trigger button and “-” button: The phone holder will close

Charging

The MOZA Mini MX 2 has a built-in lithium battery. Before first use, fully charge it to condition the battery to ensure smooth operation.
When the power indicator starts flashing, the battery level is less than 20%. Please charge it in time.
With a universal Type-C port, Mini MX 2 can be charged by both phone charger and power bank.
The battery will automatically stop charging when it gets fully charged. The blue indicator light will turn off. Please disconnect the charger.

Battery Level Indicators

The blue indicator light is always on in three bars, and the power is 70%~100%;
Two bars of the blue indicator light are always on, the battery level is 40%~70%,
The blue indicator light is always on, and the power is 20%~40%
The blue indicator light flashes once, and the battery level is 0%~20%
The blue indicator light flashes from top to bottom, and the gimbal is in upgrade mode
The blue indicator lights are on from bottom to top, charging

Note: The indicator light is off after fully charged when power off, and the indicator light is always on after fully charged when power on.

Connecting to the MOZA Genie App

Refer to the illustration ，installing the phone and balancing the gimbal.
Long press the function button for 3s to power on the gimbal, turn on the Bluetooth of the phone, launch the MOZA Genie App.
Click the Bluetooth icon in the main interface of MOZA Genie App to search for connectable devices, select the device with the connection prefix as Mini MX 2. After successful connection, the gimbal will automatically enter the shooting interface.

Mini MX 2 Activation

Enter the APP main interface to select the gimbal to be connected, the activation prompt box will pops up, click
Activate. After the activation is completed, the gimbal will work normally. If activation fails, please try to reactivate, if it fails again, please follow the prompts to contact customer service.

Button function (MOZA Genie App Control)

Fn button

Long press: on/off
Power on and enter standby mode (phone not clipped/unlocked)
Single press: shutter; record / stop
Wake up (gimbal in standby mode)
Double press: switch to video mode/photo mode
Triple press: Horizontal and vertical mode switching

Joystick

Move upwards: phone camera goes up
Move downwards: phone camera goes down
Move leftwards: phone camera goes left
Move rightwards: phone camera goes right
Inception mode: Move leftwards, roll axis rotates counterclockwise.
Move rightwards, roll axis rotates clockwise

Zoom +

Click and hold: Zoom in
Single press: Pan-tilt follow
Double click: Automatically zoom in to maximum

Zoom –

Press and hold: Zoom out
Single press：FPV Mode
Double click: Automatically zoom out to minimum
Inception Mode:Push the joystick left and right in FPV mode to control the rotation direction.

Smart Trigger

Click and hold: All Lock Mode
Double click and hold: Sport Gear Mode
One-Click: Face Tracking and lock in the center of the shot.
Double click: Re-center and exit the current mode
Triple Click: Switch between the rear and front-facing camera

Note: Mini MX 2 can control the phone’s original camera to take pictures, record/stop. When working with a native camera, some key functions cannot be used. It is recommended to use it
with MOZA Genie App. When the App is connected, the current mode will be displayed on the App.

Firmware upgrade

Turn off the power of the gimbal first, press and hold the ZOOM-button, and click the function button at the same time until the indicator light flashes from top to bottom, at this time the gimbal enters the firmware upgrade mode, then connect to the APP, and click firmware upgrade.

Bluetooth reset

When you cannot search for Mini MX 2 Bluetooth on your phone, please power on the gimbal, hold + button, then press the power button at the same time until the power indicator
flashes. Then the Bluetooth reset is successful.

Product Specification

Product Speciﬁcation

Mechanical Range

| Pan：340°
Roll：300°
Tilt：140°
FAQ
1. Why does my gimbal automatically enters sleep mode after a short while of usage?| 1. Make sure you’ve installed your phone, and check whether the mobile phone is well balanced. Serious unbalance will cause motor overload and goes to sleep to protect it.

2. Please have a check whether the indicator flashes quickly, if it does, it means low battery and the gimbal can not work.

2. Does the gimbal support fast charging？| Fast charging is not supported, the charging specification is 5V/2A
3. What can I do if there is a delay in the movement and video in my App?| 1. Check whether the anti-shake function is turned on in the App, if it is, please turn off the anti-shake function.

2. If the delay still exists after you turned off the anti-shake function, please uninstall the App and download it again. If the problem still exists, please contact our

after-sale service.

4. What should I do if × appears after I opened the App and searched

Bluetooth？

| Close Bluetooth search box in the MOZA genie app, then re-open the search box and search again the Bluetooth device, try to connect again.
---|---
5. What should I do if the Object Tracking fails？| 1. Please try to select a target of a suitable size in a single background environment. the screen and be clearly visible without any foreground objects.

2. If it still doesn’t work, please try to

upgrade the App and gimbal firmware.

6. What is Magic Mode？| 1. The Magic Mode in MOZA Genie App provides some cool short clips filmming templates, you can easily shoot several clips by following the templates.

2. The Magic Mode guide you record

and filming from three aspects including “camera movement”, “transition”, “sound effect” to achieve “one step filming”.

3. You just need to hold a button to start shooting, the gimbal will automatically move according to the scene’s requirements, and some may provide tips to users on following the camera movement.

7. What should I do if the indicator light is not on and I can’t turn the gimbal on due to

upgrade failure？

| When upgrade failure happens, please force your gimbal enter firmware upgrade mode (also called boot mode, hold zoom- button then press fn button) and upgrade firmware again.
8. How to operate the Inception Mode？| 1. Press Zoom- to switch to FPV Mode

2. Move the joystick left and right to proceed the operation for Inception Mode.