xonTel LT-01 Smart Light Switch Instructions
- June 13, 2024
- XonTel
Table of Contents
LIGHT SWTICH
INSTRUCTION
XT-01
THANKS FOR CHOOSING OUR WIFI SMART HOME SENSORS
Product Configuration
- LED Light
- Live Wire(input)
- Button
- Output
- Neutral Wire (input)
Specifications
Rated Voltage: AC 85-250V, 50/60Hz
Max Current:1 outputs – Max 10A*1
Wireless Type: 2.4GHz
Wireless Standard: IEEE 802.11b/g/n
Wireless Distance: 40m (max)
Operate Temper: 0°C~40°C (32°F~104°F)
Operating Humidity: 20%~85% non-condensing
Storage Temper: 0°C~60°C (32°F -140°F)
Storage Humidity: 0%~90% non-condensing
Product Type: EU- 1 / 2 / 3 Gang;US- 1 / 2 / 3 Gang
Product Size:86mm(L) x 86mm(W) x 34mm(H)
Support: Amazon Alexa, Google Assistant
LED State
Device Status | LED State |
---|---|
Smart Wi-Fi | Indicator ashes quickly |
AP mode | Indicator ashes slowly |
Triggered | LED will rapidly blink,and OFF after scheduled time |
Sleeping mode | Indicator OFF |
Reset | Indicator lights up for 4s and after 2 seconds lights off, device goes |
into configuration mode
How to reset?
(1) Press the reset button for 6 seconds till the indicator flash rapidly.
Then device turns to smart wifi mode.
(2) Press the reset button again for 6 seconds till the indicator flash
slowly. The device turns to AP mode.
Get Started with Tuya Smart App
1. Download APP
- Download the “Smart life” app from APP Store or Google Play to your mobile
2. Register and Login
- Launch the “Smart life” app.
- To register,enter your mobile phone number or email address,create a password ,then login to the app.
- Login if you have an account already.
3. Add Device
- Power on the smart sensor which default’s mode is Smart WiFi mode
- Select the “+” symbol on the top right-hand corner.
- Select your product type and follow the instructions of the app.
- If the connecting fails,try using AP Mode
- On the “Add device” page select “AP Mode” on the top right-hand corner and follow the instructions of the app.
- Finally, have fun!
What’s the App User Interface Like ?
Smart life
Experience Advanced Features
You can experience the various advanced features of the product with the app, just try and do it yourself.
Main function
- Working status: on/off: press one button only, the button in the app will turn to green when it is ON;
- All on or All off: press the “All open” or “All close”
- Timing switch, can be timed single or Multiple switch, and can set repeat cycle (30s delay)
Linkage alarm setting
- To connect two Sensors via scene setting.
Device sharing
- Allow others to control the device
Push notification
- Open/close push notification
Remove device
- Restore default settings; Delete and add the device again to clear the record by APP.
Make Your Home Smarter
Kuwait
Tel.:1880005
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>