xonTel LT-03 Smart WIFI Light Switch Instructions
- June 10, 2024
- XonTel
Table of Contents
- xonTel LT-03 Smart WIFI Light Switch
- Product Information
- Product Configuration
- Product Specifications
- Product How to Reset?
- Product Usage Instructions
- Product Tuya Smart App Features
- Product Configuration
- Specifications
- LED State
- How to reset?
- Get Started with Tuya Smart App
- Experience Advanced Features
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
xonTel LT-03 Smart WIFI Light Switch
Thanks for Choosing our WiFi Smart Home Sensors
Product Information
WiFi Smart Home Sensors – Light Switch
The WiFi Smart Home Sensors Light Switch is a smart home device that allows you to control the lights in your home through the Tuya Smart App. It is a WiFi-enabled switch that can be controlled remotely through the app and can also be used with voice control devices such as Alexa and Google Home. The switch is designed to work with LED lights and has an LED light indicator to show its status.
Product Configuration
The Light Switch has the following configuration:
- LED Light
- Live Wire(input)
- Button
- Output Neutral Wire (input)
Product Specifications
The following are the specifications of the Light Switch:
- LED State:
- Indicator flashes quickly: Device Status Smart Wi-Fi AP mode Triggered
- Indicator flashes slowly: Sleeping mode
- LED will rapidly blink, and OFF after scheduled time
- Indicator OFF
- Indicator lights up for 4s and after 2 seconds lights off, device goes into configuration mode
Product How to Reset?
You can reset the Light Switch by following these steps:
- Press the reset button for 6 seconds until the indicator flashes rapidly. Then, the device turns to smart WiFi mode.
- Press the reset button again for 6 seconds until the indicator flashes slowly. The device turns to AP mode.
Product Usage Instructions
Follow the below steps to use the Light Switch:
- Download the Tuya Smart App from the App Store or Google Play to your mobile phone.
- Launch the Tuya Smart App and register if you are a new user, or log in if you already have an account.
- Power on the Light Switch and ensure it is in Smart WiFi mode.
- Select the “+” symbol on the top right-hand corner of the app to add a new device.
- Select your product type and follow the instructions provided by the app to connect the Light Switch to your WiFi network.
- If the connection fails, try using AP Mode. Select AP Mode on the Add Device page and follow the instructions provided by the app.
- Once connected, you can control your lights using the app or voice control devices such as Alexa and Google Home.
Product Tuya Smart App Features
The Tuya Smart App provides many features for controlling your Light Switch:
- Working status: on/off
- All on or All off: press the All open or All close Timing switch, can be timed single or multiple switch, and can set repeat cycle (30s delay)
- Linkage alarm setting: Connect two sensors via scene setting
- Device sharing: Allow others to control the device
- Push notification: Open/Close push notification
- Remove device: Restore default settings; Delete and add the device again to clear the record by APP
With these advanced features, you can make your home smarter and more convenient to live in.
Product Configuration
Specifications
- Rated Voltage: AC 85-250V, 50/60Hz
- Max Current: 3 outputs – Max 5A*3.
- Wireless Type: 2.4GHz
- Wireless Standard: IEEE 802.11b/g/n
- Wireless Distance: 40m (max)
- Operate Temper: 0°C~40°C (32°F~104°F)
- Operating Humidity: 20%~85% non-condensing
- Storage Temper: 0°C~60°C (32°F -140°F)
- Storage Humidity: 0%~90% non-condensing
- Product Type: EU- 1 / 2 / 3 Gang;US- 1 / 2 / 3 Gang
- Product Size: 86mm(L) x 86mm(W) x 34mm(H)
- Support: Amazon Alexa, Google Assistant
LED State
Device Status | LED State |
---|---|
Smart Wi-Fi | Indicator ashes quickly |
AP mode | Indicator ashes slowly |
Triggered | LED will rapidly blink,and OFF after scheduled time |
Sleeping mode | Indicator OFF |
Reset
| Indicator lights up for 4s and after 2 seconds lights off, device goes into con guration mode
How to reset?
- Press the reset button for 6 seconds till the indicator flash rapidly.Then device turns to smart wifi mode.
- Press the reset button again for 6 seconds till the indicator flash slowly. The device turns to AP mode.
Get Started with Tuya Smart App
Download APP
- Download the “Smart life” app from APP Store or Google Play to your mobile.
Register and Login
- Launch the “Smart life” app.
- To register,enter your mobile phone number or email address,create a password ,then login to the app.
- Login if you have an account already.
Add Device
- Power on the smart sensor which default’s mode is Smart WiFi mode.
- Select the “+” symbol on the top right-hand corner.
- Select your product type and follow the instructions of the app.
- If the connecting fails,try using AP Mode
- On the “Add device” page select “AP Mode” on the top right-hand corner and follow the instructions of the app.
- Finally,have fun!
What’s the App User Interface Like ?
Experience Advanced Features
You can experience the various advanced features of the product with the app, just try and do it yourself.
Main fuction
- Working status: on/off: press one button only, the button in the app will turn to green when it is ON;
- All on or All off: press the “All open” or “All close”
- Timing switch, can be timed single or Multiple switch, and can set repeat cycle (30s delay)
Linkage alarm setting
- To connect two Sensors via scene setting.
Device sharing
- Allow others to control the device
Push notification
- Open/close push notification
Remove device
- Restore default settings; Delete and add the device again to clear the record by APP.
Make Your Home Smarter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>