xonTel LT-02 Smart Light Switch Instructions
- June 13, 2024
- XonTel
Table of Contents
xonTel LT-02 Smart Light Switch Instructions
Product Configuration
Specifications
- Rated Voltage: AC 85-250V, 50/60Hz
- Max Current:2 outputs – Max 10A*2;
- Wireless Type: 2.4GHz
- Wireless Standard: IEEE 802.11b/g/n
- Wireless Distance: 40m (max)
- Operate Temper: 0°C～40°C (32°F～104°F)
- Operating Humidity: 20%～85% non-condensing
- Storage Temper: 0°C～60°C (32°F -140°F)
- Storage Humidity: 0%～90% non-condensing
- Product Type: EU- 1 / 2 / 3 Gang;US- 1 / 2 / 3 Gang
- Product Size:86mm(L) x 86mm(W) x 34mm(H)
- Support: Amazon Alexa, Google Assistant
LED State
| Device Status | LED State |
|---|---|
| Smart Wi-Fi | Indicator ‑ashes quickly |
| AP mode | Indicator ‑ashes slowly |
| Triggered | LED will rapidly blink, and OFF after scheduled time |
| Sleeping mode | Indicator OFF |
| Reset | Indicator lights up for 4s and after 2 seconds lights o, device goes |
into configuration mode
How to reset?
- Press the reset button for 6 seconds till the indicator flash rapidly. Then device turns to smart WIFI mode.
- Press the reset button again for 6 seconds till the indicator flash slowly. The device turns to AP mode.
Get Started with Tuya Smart App
-
Download APP
-
Register and Login
- Launch the “Smart life” app.
- To register, enter your mobile phone number or email address, create a password ,then login to the app.
- Login if you have an account already.
-
Add Device
- Power on the smart sensor which default’s mode is Smart WiFi mode.
- Select the “+” symbol on the top right-hand corner.
- Select your product type and follow the instructions of the app.
- If the connecting fails, try using AP Mode
- On the “Add device” page select “AP Mode” on the top right-hand corner and follow the instructions of the app.
- Finally, have fun!
What’s the App User Interface Like ?
Smart life
You can experience the various advanced features of the product with the app, just try and do it yourself.
Main fuction
-
Working status: on/off: press one button only, the button in the app will turn to green when it is ON;
-
All on or All off: press the “All open” or “All close”
-
Timing switch, can be timed single or Multiple switch, and can set repeat cycle (30s delay)
Linkage alarm setting -
To connect two Sensors via scene setting.
Device sharing -
Allow others to control the device
Push notification -
Open/close push notification
Remove device -
Restore default settings; Delete and add the device again to clear the record by APP.
Make Your Home Smarter
Documents / Resources
|
xonTel LT-02 Smart Light
Switch
[pdf] Instructions
LT-02, XT-02, LT-02 Smart Light Switch, Smart Light Switch, Light Switch,
Switch
---|---