XonTel LT-03 Smart Light Switch Instructions
- June 13, 2024
- XonTel
Table of Contents
XonTel LT-03 Smart Light Switch
Product Information
The XT-03 is a WiFi smart home sensor that allows you to control and monitor your home lighting remotely. It features LED lights, live wire input, output neutral wire input, and a reset button. The device has various LED state indicators to provide information about its status and modes of operation.
Specifications
- LED State : Indicator flashes quickly, indicator flashes slowly, LED rapidly blinks and turns off after scheduled time, indicator off, indicator lights up for 4 seconds and then turns off
- Device Status : Smart Wi-Fi mode triggered, sleeping mode
- Reset : Press the reset button for 6 seconds to switch between smart Wi-Fi mode and AP mode
Product Usage Instructions
How to Reset?
To reset the device, follow these steps
- Press the reset button for 6 seconds until the indicator flashes rapidly. The device will turn to smart Wi-Fi mode.
- To switch to AP mode, press the reset button again for 6 seconds until the indicator flashes slowly.
Get Started with Tuya Smart App
- Download the Smart Life app from the App Store or Google Play on your mobile device.
- Launch the Smart Life app and register by entering your mobile phone number or email address and creating a password. If you already have an account, simply log in.
- Power on the XT-03 smart sensor, which is initially in Smart Wi-Fi mode.
- In the Smart Life app, select the “+” symbol in the top right-hand corner.
- Select your product type and follow the app’s instructions to add the device. If the connection fails, try using AP mode by selecting AP Mode on the Add device page.
- Finally, have fun using the app to control and monitor your XT-03 smart home sensor!
App User Interface
The Smart Life app provides an intuitive user interface for controlling and
managing your XT-03 smart home sensor. It offers advanced features such as
- Working status control : Turn the device on or off with a single button press.
- All on or all off : Use timing switches to control multiple switches and set repeat cycles with a 30-second delay.
- Linkage alarm setting: Connect two sensors via scene settings.
- Device sharing: Allow others to control the device.
- Push notification: Receive open/close push notifications.
- Remove device: Restore default settings, delete and re-add the device to clear the record through the app.
Make your home smarter with the XT-03 WiFi smart home sensor and the Smart Life app!
Product Configuration
Specifications
- Rated Voltage: AC 85-250V, 50/60Hz
- Max Current: 3 outputs – Max 10A*3.
- Wireless Type: 2.4GHz
- Wireless Standard: IEEE 802.11b/g/n
- Wireless Distance: 40m (max)
- Operate Temper: 0°C～40°C (32°F～104°F)
- Operating Humidity : 20%～85% non-condensing
- Storage Temper: 0°C～60°C (32°F -140°F)
- Storage Humidity: 0%～90% non-condensing
- Product Type : EU- 1 / 2 / 3 Gang;US- 1 / 2 / 3 Gang
- Product Size :86mm(L) x 86mm(W) x 34mm(H)
- Support: Amazon Alexa, Google Assistant
LED State
| Device Status | LED State |
|---|---|
| Smart Wi-Fi | Indicator flashes quickly |
| AP mode | Indicator flashes slowly |
| Triggered | LED will rapidly blink,and OFF |
after scheduled time
Sleeping mode| Indicator OFF
Reset
| Indicator lights up for 4s and after 2 seconds lights off, device goes
into configuration mode
How to reset?
- Press the reset button for 6 seconds till the indicator flash rapidly. Then device turns to smart WiFi mode.
- Press the reset button again for 6 seconds till the indicator flash slowly. The device turns to AP mode.
Get Started with Tuya Smart App
- Download APP
- Download the “Smart life” app from APP Store or Google Play to your mobile.
- Register and Login
- Launch the “Smart life” app.
- To register,enter your mobile phone number or email address,create a password ,then login to the app. Login if you have an account already.
- Add Device
- Power on the smart sensor which default’s mode is Smart WiFi mode.
- Select the “+” symbol on the top right-hand corner. Select your product type and follow the instructions of the app.
- If the connecting fails,try using AP Mode
- On the “Add device” page select “AP Mode” on the top right-hand corner and follow the instructions of the app. Finally, have fun!
What’s the App User Interface Like ?
Smart life
Experience Advanced Features
You can experience the various advanced features of the product with the app, just try and do it yourself.
Main function
- Working status: on/off: press one button only, the button in the app will turn to green when it is ON; All on
- All off: press the “All open” or “All close” Timing switch, can be timed single or Multiple switch, and can set repeat cycle (30s delay)
Linkage alarm setting
To connect two Sensors via scene setting.
Device sharing
Allow others to control the device
Push notification
Open/close push notification
Remove device
Restore default settings; Delete and add the device again to clear the record
by APP.
Make Your Home Smarter
- www.xontel.com
- Kuwait
- Tel.: 1880005
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>