VEVOR ZH-9211R Gas Barbecue Machine Instruction Manual
- June 17, 2024
- VEVOR
Table of Contents
VEVOR ZH-9211R Gas Barbecue Machine
Other Model
MODEL:ZH-9211R / ZH-9325R
ZH-9211R
ZH-9325R
We continue to be committed to provide you tools with competitive price.
“Save Half”, “Half Price” or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and does not necessarily mean to
cover all categories of tools offered by us. You are kindly reminded to verify
carefully when you are placing an order with us if you are actually saving
half in comparison with the top major brands.
Warning -To reduce the risk of injury, user must read instructions manual carefully.
PRODUCT DESCRIPTION
Gas barbecue machine is designed with advanced techniques. It has the characteristics of high efficiency; keeping warm, using less energy, safety and easy operation.
Features:
- Temperature control: This roaster adopts two burners and two thermostats for separate control.
- The temperature can be adjusted within a certain range (see the table below).
IMPORTANT SAFEGUARDS
When using the electrical appliance, basic safety precautions should always be followed including the following.
- Read all instructions.
- This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning using the appliance safely and understand the hazards. Children shall not play with the appliance. Cleaning and children shall not make user maintenance unless they are older than 8 and supervised.
- Keep the appliance and cord out of reach of children less than 8 years.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- CAUTION: Hot surfaces. Do not touch hot surfaces. Use handles or knobs, Do not let the cord hang over the edge of a table or hot surface.
- The appliances are not intended to be operated using an external timer or a separate remote-control system.
- Clean surfaces in contact with food.
- Before use, check that the voltage of the wall outlet corresponds to the one shown on the rating plate.
- To protect against electric shock, do not immerse the cord, plugs, or housing in water or other liquid.
- Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
- Do not place on or near a hot gas, electric burner, or heated oven.
- Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
- Do not touch the machine’s moving or spinning parts when baking.
- Never switch on the appliance without properly placing the bread pan-filled ingredients.
- Never beat the bread pan on the top or edge to remove the pan; this may damage the bread pan.
- Always attach the plug to the appliance first, then plug the cord into the wall outlet. Turn any control OFF to disconnect, then remove the plug from the wall outlet.
- Do not use the equipment for unexpected purposes.
- Other precautions:
a. The roaster should be put in a stable location. It should have a 30cm distance from the other objects. The backside should be 10cm away from the wall. Any in flammables, such as towels and clothing cannot be put on the roaster.
b.The voltage of power should be the same as the nameplate of the roaster. The difference of voltage cannot be beyond +10%.
c. You should install a power switch, fuse and breaker for the roaster.
The objects cannot be put around the switch.
d. As the roaster uses low pressure LPG (2.8Kpa), the connecting hose cannot be shorter than 1.5m.
SAVE THESE INSTRUCTIONS
FCC Information
CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This product may cause harmful interference.
- This product must accept any interference received, including interference that may cause undesired operation.
WARNING:
Changes or modifications to this product not expressly approved by the
party.responsible for compliance could void the user’s authority to operate
the product.
Note:
This product has been tested and found to comply with the limits for a Class B
digital device pursuant to Part 15 of the FCC Rules, These limits are designed
to provide reasonable protection against harmful interference in a residential
installation.
This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception,which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- Increase the distance between the product and receiver.
- Connect the product to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for assistance.
SPECIFICATIONS
Model| Voltage Frequenc y| Power| Gas pressur e|
Temperature Range| Capacity
---|---|---|---|---|---
ZH-9211R| AC115V 60Hz| 4 W| 2.8 Ka| 122℉~446℉| 13 lb
ZH-9325 R| AC115V 60Hz| 14 W| 2.8 Ka| 122℉~536℉| 5 String of barbecue
Heating Means: Liquefied gas/propane
OPERATION
- Put the food onto the swing pole, switching on the power, the power lamp is on. Turning the thermostat to the required temperature. Turning the gas valve counter clockwise, the ignition system ignites automatically. If it cannot ignite, turn off the gas valve and try again. The temperature of the roaster begins increasing. The food is roasting.
- The swing pole is for the roasted food. It can be put up for clean or fixing the food. The food should put in the middle of the pole. During the pole swings, the roasted food also swings.
TRANSPORTATION AND STORAGE
In transportation, it should be very careful to prevent heavy vibration.
The equipment in package cannot be put in open-air for long time.
It should be put in a good facility of air and non-corrosive air storage.
It cannot be put upside-down.
If it is necessary to put it in open-air, it should have waterproof
facilities.
CLEANING AND PROTECTION
- Before cleaning, the power should be cut off.
- After work everyday, you should clean the roaster surface and the leading wire with wet towel, using non-corrosive detergent. It is forbidden to water the electric box.
FAILURE RECOVERY
| Fault Phenomenon | Cause | The Exclusion Method |
|---|---|---|
| Ignition needle has sparkles, but cannot ignite. | there is air in the pipe or | |
| voltage is lower. | trying more times or replace batteries. | |
| There is gas smell but cannot ignite |
- Gas pressure is too low.
- The ignition needle position is abnormal.
- Nozzle is blocked.
|
- Adjust the pressure .
- Adjust the needle to Moved 5mm from the surface.
- Clean nozzle
Customer Support
Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
Technical Support and E-Warranty Certificate www.vevor.com/support
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>