audiophony H11408 Portable Speaker Sound Systems User Guide

audio phony H11408 Portable Speaker Sound Systems

Product Information

• Product Name: H11408
• Version: 1 / 03-2023
• Language: English

Safety Information:

• This unit is intended for indoor use only.
• Do not use it in wet or extremely cold/hot locations.
• Failure to follow safety instructions may result in fire, electric shock, injury, or damage to the product or other property.
• Maintenance procedures must be performed by a CONTEST-authorized technical service.
• Basic cleaning operations must follow safety instructions.
• Do not undertake any maintenance operation when the unit is switched on to avoid electric shock.
• The unit contains no user-serviceable parts. Do not open the housing or attempt any maintenance by yourself. Contact your nearest dealer for service.
• Do not use any multi-socket, power cord extension, or connecting system without ensuring they are perfectly isolated and defect-free to avoid electrical malfunction.

Sound Levels:

• Our audio solutions deliver important sound pressure levels (SPL) that can be harmful to human health when exposed for long periods. Do not stay in close proximity to operating speakers.

Symbols Used:

• I M P O R T A N T: Signals an important safety precaution.
• WARNING: Signals a risk to the user’s physical integrity and potential product damage.
• CAUTION: Signals a risk of product deterioration.

Recycling:

• Please follow the instructions and recommendations for recycling your device.

Product Usage Instructions

1. Please read carefully: We strongly recommend reading and understanding the safety instructions before operating the unit.
2. Please keep this manual: We strongly recommend keeping this manual with the unit for future reference.
3. Operate carefully: Take into consideration every safety instruction while using the product.
4. Follow the instructions: Carefully follow each safety instruction to avoid physical harm or property damage.
5. Avoid water and wet locations: Do not use the product in rain or near washbasins or other wet locations.
6. Installation: Use a fixation system or support recommended by the manufacturer. Follow the installation instructions and use the adequate tools. Ensure the unit is firmly fixed to avoid vibration and slipping while operating.
7. Ceiling or wall installation: Contact your local dealer before attempting any ceiling or wall installation.
8. Ventilation: Do not obstruct or cover the cooling vents as it may result in overheating and potential physical injury or product damage. Do not operate the product in a closed non-ventilated area unless cooling vents are provided.
9. Heat exposure: Keep the product away from any heat source such as heaters, amplifiers, hot plates, etc., toprevent overheating and product damage.

Safety information

Important safety information

• This unit is intended for indoor use only. Do not use it in a wet, or extremely cold/hot location. Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to this product or other property.
• Any maintenance procedure must be performed by a CONTEST-authorised technical service. Basic cleaning operations must thoroughly follow our safety instructions.
• This product contains non-isolated electrical components. Do not undertake any maintenance operation when it is switched on as it may result in electric shock.

Symbols used

• This symbol signals an important safety precaution.
• The WARNING symbol signals a risk to the user’s physical integrity. The product may also be damaged.
• The CAUTION symbol signals a risk of product deterioration.

Instructions and recommendations

1. Please read carefully :
   We strongly recommend to read carefully and understand the safety instructions before attempting to operate this unit.

2. Please keep this manual :
   We strongly recommend keeping this manual with the unit for future reference.

3. Operate carefully this product :
   We strongly recommend taking into consideration every safety instruction.

4. Follow the instructions:
   Please carefully follow each safety instruction to avoid any physical harm or property damage.

5. Avoid water and wet locations :
   Do not use this product in the rain, or near washbasins or other wet locations.

6. Installation :
   We strongly encourage you to only use a fixation system or support recommended by the manufacturer or supplied with this product. Carefully follow the installation instructions and use the adequate tools. Always ensure this unit is firmly fixed to avoid vibration and slipping while operating as it may result in physical injury.

7. Ceiling or wall installation :
   Please contact your local dealer before attempting any ceiling or wall installation.

8. Ventilation :
   The cooling vents ensure a safe use of this product and avoid any overheating risk. Do not obstruct or cover these vents as it may result in overheating and potential physical injury or product damage. This product should never be operated in a closed non-ventilated area such as a flight case or a rack, unless cooling vents are provided for the purpose.

9. Heat exposure :
   Sustained contact or proximity with warm surfaces may cause overheating and product damage. Please keep this product away from any heat sources such as heaters, amplifiers, hot plates, etc…

WARNING: This unit contains no user-serviceable parts. Do not open the housing or attempt any maintenance by yourself. In the unlikely event your unit may require service, please contact your nearest dealer.
In order to avoid any electrical malfunction, please do not use any multi- socket, power cord extension or connecting system without making sure they are perfectly isolated and present no defect.

Sound levels

Our audio solutions deliver important sound pressure levels (SPL) that can be harmful to human health when exposed for long periods. Please do not stay in close proximity of operating speakers.

Recycling your device

• As HIT MUSIC is really involved in the environmental cause, we only commercialize clean, ROHS-compliant products.

• When this product reaches its end of life, take it to a collection point designated by local authorities. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

• Electric power supply :

• This product can only be operated according to a very specific voltage. This information are specified on the label located at the rear of the product.

• Power cord protection:

• Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords atlugs, convenience receptacles and the point where they exit from the fixture.
  Cleaning precautions :

• Unplug the product before attempting any cleaning operation. This product should be cleaned only with accessories recommended by the manufacturer. Use a damp cloth to clean the surface. Do not wash this product.

• Long periods of nonuse:

• Disconnect the unit’s main power during long periods of nonuse.

• Liquids or object penetration :

• Do not let any object penetrate this product as it may result in electric shock or fire.

• Never spill any liquid on this product as it may infiltrate the electronic components and result in electric shock or fire.

• This product should be serviced when :

• Please contact the qualified service personnel if :

• The power cord or the plug has been damaged.

• Objects have fallen or liquid has been spilled into the appliance.

• The appliance has been exposed to rain or water.

• The product does not appear to operate normally.

• The product has been damaged.

• Inspection/maintenance :

• Please do not attempt any inspection or maintenance by yourself. Refer all servicing to qualified personnel.

• Operating environment :

• Ambient temperature and humidity: +5 – +35°C, relative humidity must be less than 85% (when cooling vents are not obstructed).

• Do not operate this product in a non-ventilated, very humid or warm place.

Introduction

Thank you for choosing the RACER120 amplified system.

• An easy-to-carry all-in-one system
• Performance and sound quality
• Built-in media player
• Two UHF diversity receiver slots
• The RACER120 is a powerful all-in-one system with excellent sound quality for all your on-the-go performances.
• It comes standard with a USB/SD player, Bluetooth® TWS receiver and a mixer for connecting two additional microphones and an external source. It’s easy to carry with its built-in trolley, and it has excellent battery lifeand can be charged while in use. With its integrated compartment that can accommodate two microphones, it is easy to store in a minimum of space. For its protection, you can add a cover (code: H10208).
• Visualization of the battery level by LED display
• Simultaneous charging and use
• Automatic cut-off in case of low battery level
• Storage compartment for two microphones and cables
• Retractable handle and transport wheels

The different modules

Back

• A – Optional UHF receiver module. See paragraph 5 for more details.
• B – USB/SD/Bluetooth® TWS module assigned to channel 1.
• C – Mixer section.
• D – Master section.
• E – Power supply section

Top

1. Fixed carrying handle
2. Accessories storage compartment
3. Telescopic carrying handle

Description of modules

USB/SD/Bluetooth® TWS module

1. SD card slot
2. Player display
3. IR diode for receiving remote control signals
4. USB mass storage port for USB key. This USB plug can also be used to recharge a phone or a tablet: 5 V 2 A
5. Multimedia player controls
6. Level control: This control is for the multimedia player and the AUX input level
7. AUX input on 3.5 stereo jack Priority AUX input on the player assoon as a source is connected.

Multimedia player mode displays

Remote control

The infrared remote control of your player allows you to remotely control certain functions of your player for your SD/USB or Bluetooth® sources.

• The CH- and CH+ keys are used to move through the folders on the SD or USB media.
• The «EQ» button allows you to select different equalization presets according to different music genres: Normal / Rock / Pop / Classic / Jazz /Country.
• The Vol- and Vol+ keys are used to adjust the output level of the player.
• The «ENTER» key allows you to choose the playback mode: Repeat All (A)/ Repeat One (1)/ Repeat Folder (F)/ Random (R).
• The MODE button activates the Bluetooth® mode
• The 0 to 9 keys allow direct access to a song.

Mixer section

1. CH2 and CH3 inputs on XLR and 6.35 jacks. Allow to connect a microphone or an instrument.

2. LINE / MIC / GUITAR input selectors.
   Allows you to select the input level of the channel. LINE level for instruments, MIC level for microphones and GUITAR level for guitars.

3. Potentiometers for adjusting the volume of the CH2 and CH3 channels.

4. LINK OUT.
   Allows you to feed the output signal back to another sound system (balanced signal)

5. LINK MODE SETUP button.

   • PRE: The signal is the sum of the signals present at the input without being modified by the MASTER level setting.
   • POST: The signal is the sum of the signals present at the input and depends on the MASTER level setting.

6. MIC TALKOVER button.
   Activates or deactivates the talkover function on the microphone channels including the HF microphone.

Master section

1. MASTER volume control. This control affects the overall output volume of the system.
2. POWER/LIMIT light. Indicates whether the system is powered and whether the limiter is active.When the light is blue, the system is powered up. When the light is flashing red, it means that the power limiterprotection system is active. Please lower the input level of yoursources and/or the master.
3. Potentiometer for adjusting the treble level. From -12 dB to +12 dB clockwise. This adjustment affects the output of the master.
4. Potentiometer for adjusting the bass level. From -12 dB to +12 dB clockwise. This adjustment affects the output of the master.
5. MIC EFFECT: Potentiometer to adjust the level of the effect applied to the microphone channels including the HF microphone

Power supply section

1. Mains plug.
   Please plug in your power cord to recharge the
   batteries and/or use your device.

2. Fuse holder.
   Please replace the fuse with an identical model
   only. Fuse T2 AL 250V.

3. ON-OFF-CHARGE switch.

   • In the ON position: The RACER120 is powered
     on.

   • In the OFF position: The RACER120 is off.

   • In the CHARGE position: The RACER120 batteries are charging. The BATTERY CONNECT switch must be in the ON position for charging totake place.

   • BATTERY CONNECT switch.

   • Disconnects the battery when the RACER120 is not used for a long time.

   • This saves the battery’s life.

   • The switch is set to OFF on delivery. 5 – Battery level indicators.

   • It is imperative to charge the batteries when only the LOW light is on.

   • The CHARGE indicator of the batteries lights up green when the batteries are charged.

Precautions for using the integrated battery

1. This device is equipped with two 18 V / 7 Ah NP batteries for autonomy of 6 hours on average depending on the type of use.
2. The batteries take about 8 hours to fully charge.
3. A charge management system is built into the device and tells you when a recharge is needed.
4. If, however, the battery level is low and only the «LOW» indicator is lit, connect your device to the mains or replace the batteries with charged ones.
5. Used batteries must be disposed of in the appropriate waste disposal system. Do not dispose of them in the environment.
6. To conserve battery power, always turn the unit completely off and set the BATTERY CONNECT switch to the OFF position when not in use.
7. Batteries must be charged regularly to prevent them from drying out and becoming completely unusable. We recommend charging the batteries at least once every three months.
8. The batteries in this unit are considered wear parts and are not covered by the warranty

Installation of optional UHF modules

RACER-GoMod (F5 or F8)
single module

Do not forget to lock the cords in the jaws provided for this purpose.

Insulate the ends of the unused cords IMPORTANT and hang them behind the trap door B

Two modules
Before handling, make sure that the RACER is switched off.

Technical data

Inputs:

• * 2 channels XLR/TRS combo Line/Mic

  • 1 1/8″ AUX channel
  • 1 Bluetooth connexion
  • 2 optional UHF microphones

• Output: 1 TRS mix output

• Loudspeaker: 10″ loudspeaker + 1″ titanium driver, total impedance: 4 Ohms

• Power: 120W RMS Class D amplifier

• Frequency response: 60 – 20k Hz

• Sound pressure level: 123 dB SPL max

  • HF microphone (Option) RACER-GoMod UHF diversity receiver

• RACER-GoModF5 (F5 range)Code: H11411

• RACER-GoModF8 (F8 range) Code: H11410

• GO-Hand-F5
  Code : H11030 GO-Body-F5

• Code : H11031

• GO-Hand-F8

• Code : H9989 GO-Body-F8
  Code : H9990

• GO-Head

• Code : H9991 GO-Lava

• Code : H9992

• Frequency range:

• F8 range : UHF 823~832 MHz and 863~865 Mhz – 10 mW

• F5 range : UHF 514~542 MHz – 35 mW

• Player:

  • Built-in USB key / SD card reader and Bluetooth® receiver
  • Supplied with an infrared remote control

• Bluetooth: Type V5.0 AVRCP, with an excellent, close-to-digital audio transmission

• Settings and indicators:

  • Independent-level settings for each channel
  • Low and treble equalizer from -12dB to + 12dB
  • ROOM and talk over effects on all mic channels
  • Power and Limit Indicator
  • Battery charge indicators

• Finish: Polypropylene housing, metal mesh grill. C36 mounting plate for speaker stands

• Dimensions: (in mm) 560 x 360 x 308

• Net weight: (incl. batteries) 16.4 kg

• Batteries: 2 x 12 V / 5 Ah wired in series / 90 x 100 x 70 mm

• Autonomy: 6 hours depending on the volume

• Charging time: 8 hours to recharge the two 12 V batteries

• Power management:

  • LED display to indicate the charge level. Charge it and use it at the same time.
  • Automatic shutdown if the battery level is too low

• Protective cover (code: H10208)

Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are subject to modifications without prior notice. That is why technical specifications and the product’s physical configuration might differ from the illustrations.

• Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com.
• AUDIOPHONY® is a trademark of HIT MUSIC S.A.S – Zone Cahors sud – 46230 FONTANES – FRANCE

References

• Audiophony

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>