audiophony EXT312 100V and 8 Ohms Outdoor Speaker Instruction Manual
- June 13, 2024
- auDiopHony
Table of Contents
audiophony EXT312 100V and 8 Ohms Outdoor Speaker
Product Information
- Model: EXT312
- Power: 300W RMS
- Input Voltage: 100V/8
- Impedance: 200W OFF, 100V 100W, 8 300W, 50W
The EXT312 is an outdoor speaker designed for use in various environments. It features a mid-range coaxial system and is highly weather-resistant, making it suitable for outdoor use. The speaker has a power range of 50W, 100W, or 200W at 100V and can also be used with a traditional sound amplifier at an impedance of 8 Ohms. The speaker is constructed with an ABS body, aluminum grill, and acoustic foam for enhanced durability and sound quality. It comes with an adjustable mounting bracket for easy installation and has an IP65 rating, providing protection against dust and water jets.
Product Usage Instructions
- Before connecting the EXT312 speaker to the amplifier, ensure that the power and impedance settings on the terminal block are correctly configured based on your requirements.
- If using the speaker at 100V, use the selector switch on the terminal block to choose between power options: 50W, 100W, or 200W.
- If using the speaker at 8 Ohms with a traditional sound amplifier, set the impedance accordingly.
- Ensure that the total power of all speakers connected to the amplifier does not exceed the maximum power rating of the amplifier.
- Mount the EXT312 speaker in a suitable location using the adjustable mounting bracket. Ensure that it is securely fixed.
- Make sure the amplifier is turned off before connecting the speaker to avoid any potential electrical hazards.
- Connect the speaker to the amplifier using the provided internal connector with a sealed cable gland.
- Once the installation is complete, double-check all connections and settings
- Turn on the amplifier to power the speaker and enjoy high-quality audio in your outdoor space.
Note: Always exercise caution when working with electrical equipment. Refer to the user manual for detailed instructions and safety guidelines.
- Dimensions: 407 x 410 x 448 mm
- Net Weight: 20 Kg
SPECIFICATION
- Power ratings
- 50W or 100W or 200W / 100V
- 100 V or 8 Ohms
- Componants
- 12″ subwoofer (3″ voice coil) and 1″ compression driver (1.7 voice coil)
- SPL max
- 123 dB continueous, 129 dB max.
- Sensitivity (1W/1m)
- 98 dB
- Frequency response
- 55 Hz – 18 KHz
- Dispersion (-6dB)
- 80 ° x 80°
- Construction
- ABS injection molding with aluminum grill and acoustic foam
- Hanging
- Adjustable mounting bracket
- Connecrtions
- Internal connector with sealed cable gland
- IP rate
- IP65 (protection against dust and water jets)
- Size
- 407 x 410 x 448 mm
- Net weight
- 20 Kg
Wiring
Caution: Dangerous voltage The speakers should be connected to the amplifier last. Turn on the amplifier when the installation is complete and checked.
Dimensions
The power and impedance of the EXT312 loudspeaker are determined by the position of the selector switch on the terminal block. The power can vary from 50 to 200W at 100V depending onthe position of the selector. Care should be taken to ensure that the sum of the power of all speakers connected to the amplifi er does not exceed the maximum power of the amplifi er. The EXT312 can also be used in low impedance (8 ohms) and therefore connected to a traditional sound amplifier.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>