audiophony EXT415 100V and 8 Ohms Outdoor Speaker Instruction Manual
- June 13, 2024
- auDiopHony
Table of Contents
EXT415 100V and 8 Ohms Outdoor Speaker
EXT415
Enceinte d’extérieur 100V et 8 Ohms.
100V and 8 Ohms outdoor speaker.
Mid-range coaxial system
Highly weather-resistant
Power ratings | 75W or 150W or 300W / 100V |
---|
400W / 8 Ohms
Power supply| 100 V or 8 Ohms
Componants| 15″ subwoofer (3″ voice coil) and 1″ compression driver (1.7 voice
coil)
SPL max| 129 dB continueous, 135 dB max.
Sensitivity (1W/1m)| 103 dB
Frequency response| 50 Hz – 18 KHz
Dispersion (-6dB)| 70 ° x 70°
Construction| ABS injec on molding with aluminum grill and acoustic foam
Hanging| Adjustable mounting bracket
Connec ons| Internal connector with sealed cable gland
IP rate| Internal connector with sealed cable gland
Dimensions
Size| 498 x 501 x 596 mm
Net weight| 27.5 Kg
Wiring
Attention : Tension dangereuse
Caution: Dangerous voltage
Dimensions
The power and impedance of the EXT415 loudspeaker are determined by the
position of the selector switch on the terminal block.
The power can vary from 75 to 300W at 100V depending on the posi on of the
selector.
Care should be taken to ensure that the sum of the power of all speakers
connected to the amplifi er does not exceed the maximum power of the amplifier.
The EXT415 can also be used in low impedance (8 ohms) and therefore connected
to a tradi onal sound amplifitier.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>