eSR2 Aprilia Smart Movement User Manual

June 13, 2024
aprilia

User manual

This manual is valid for the following electric scooters:
eSR2, eSR2 EVO, eSRZ, eSRZ Safe Ride, eSRZ AS, Tuareg
User manual
AP-MO-000001 rev. 3
Instructions translated from the original Italian
Thank you for choosing this product.
For information, technical support, assistance and to consult the general terms of the warranty, contact your dealer or visit the website www.apriliasmartmovement.it/en/

Safety instructions

IMPORTANT! Read and follow the instructions carefully before using the item. Keep this manual for future reference or new users.
Take the time to learn the basics of the procedure to avoid severe accidents that may occur in the first few months. Contact your dealer for the proper support on how to use the item correctly or to be directed to an appropriate training organisation.
The company assumes no direct or indirect responsibility arising from misuse of the item, non-compliance with both the highway code and the instructions in the manual, accidents or disputes caused by non-compliance or illegal activity.
This product is to be used for recreational purposes, by one person only and without passengers, therefore it cannot be used by more than one person at a time.
Do not modify the intended use of the vehicle in any way. The item is not suitable for stunts, competitions, transporting objects, towing other vehicles or trailers.
The electric scooter must be used carefully, always respecting the rules imposed by the Highway Code of the country where it is used, in order to avoid dangerous situations and to take the utmost care of yourself and others.
CAUTION

Scooter model| eSR2| eSR2 EVO| eSRZ| eSRZ Safe Ride| eSRZ AS| Tuareg
---|---|---|---|---|---|---
Product code without indicators| AP-MO-210002| AP-MO-210003| AP- MO-210005| –| –| –
Product code with indicators included| AP-MO-210006 AP-MO-210008 AP- MO-220004| AP-MO-220006| AP-MO-210007 AP-MO-220003| –| –| –
Product  code with double brake control| –| –| –| AP-MO-220009| AP- MO-230002| AP-MO-220001 AP-MO-220005
MIN weight (Kg)| 30| 30| 30| 30| 30| 30
MAX weight (Kg)| 100| 100| 100| 100| 100| 120
MIN age | 14| 14| 14| 14| 14| 14
MAX age
| 65| 65| 65| 65| 65| 65
MIN height (cm)| 120| 120| 120| 120| 120| 120
MAX height (cm)| 200| 200| 200| 200| 200| 200

  • Before using the product, check and follow local regulations regarding the minimum age of the driver, restrictions on the type of drivers who can use the product and on the use of the product itself.
    The A-weighted emission sound pressure level (noise) at the rider’s ear is less than 70 dB(A).
    Visual representation of the safety warnings
    To identify the safety messages in this manual, the following graphic symbols will be used. They draw the focus of attention of the reader/user to the proper, safe use of the item.
    CAUTION
    Pay attention
    Highlights the rules to follow to prevent damage to the item and/or prevent hazardous situations from arising.
    DANGER
    Residual risks
    Highlights the presence of hazards causing residual risks, which the user must be aware of to prevent injury or damage to property.
    General warnings
    CAUTION
    It is important to bear in mind that when out in a public space or on the road, even when the instructions in the manual are observed down to the letter, the rider is not immune to injury caused by infractions or inappropriate actions taken towards other vehicles, obstacles or persons. Misuse of the item or non-compliance with the instructions provided in this manual may cause severe injury.
    This product is an electric vehicle. The faster you ride, the longer the braking distance. Emergency braking on slippery, muddy, wet or icy roads may result in wheel spin and loss of balance. Adequate speeds and safety distances from other vehicles or pedestrians must be adhered to. Take extra care when riding on unfamiliar roads. Do not open the kickstand when using the item, risk of severe personal injury and damage to item.
    CAUTION
    On wet roads, the braking distance increases and the grip decreases compared to dry roads!
    Drive more carefully, keep a safe distance!
    For personal safety, wear a helmet, and knee and elbow pads to protect against falls and injuries while riding the item. When allowing others to use the item, ensure that the rider wears the safety equipment and explain the operation of the vehicle. To avoid injury, do not allow other persons to use the item if they do not know how to use it. Wear shoes before using the item.
    Children must not play with the scooter or its parts, nor should they be allowed to clean it or perform maintenance operations.
    When riding, take special care to not frighten children or pedestrians. When passing behind them, warn them by sounding the horn and slow down using the minimum speed of 6km/h.
    CAUTION
    Frequency information:
    The frequency hopping data transmission equipment Bluetooth® is operating between the band 2,4000 GHz and 2,4835 GHz. The maximum transmitted radio frequency power is 100mW.
    Instructions and warnings on rider behaviour
Conditions Appropriate / intended use Improper use
Riders One More than one person, with children or animals
Safety equipment Helmet, knee pads, elbow pads, reflectivevest No safety

equipment
Pre-riding check| Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear, accelerator, indicators, lights and charge status of battery.
If any unusual noises or faults are detected, do not use the item and contact your dealer or the Authorised Technical Support
Department| Never checking the item prior to use
Using the item when noise or faults are present

Walking while pushing the item

| Not accelerating
Pushing while walking across pedestrian crossings In pedestrian areas when not in pedestrian mode (6 km/h)
In overcrowded areas| Press the accelerator
Riding the vehicle on pedestrian crossings Riding the vehicle in pedestrian areas when not in pedestrian mode (6 km/h)
Riding the vehicle in overcrowded areas
Stationary| The person riding the item must be able to easily place both feet on the ground while holding the handlebars at the correct height| Not being able to keep the item stationary and balanced. Sitting on the item while it is running or stationary
Conditions| Appropriate / intended use| Improper use
---|---|---
Riding under normal conditions| No objects hanging from handlebars| Objects hanging from handlebars result in instability and may impede manoeuvring
Riding with both hands on handlebars.
Not using devices such as phones, smartwatches, music players, or headphones| One-handed or hand-free riding
Using devices such as phones, smartwatches, music players, or headphones
Riding with both feet on the footrest comfortably and safely| Riding with one or both feet outside the footrest
It is prohibited to place or amass weight on the rear mudguard.
Riding with helmet and protective equipment| Riding without helmet and protective equipment
Riding on easily accessible, smooth and compact roads, avoiding areas with intense traffic or overcrowded areas:
e.g. dedicated cycle path, smooth paved surfaces
Complying with local regulations and the highway code| Riding on motorways, long-distance roads Riding on busy roads
Riding on pavements
Riding in overcrowded areas Riding on very rough roads
Riding near: ravines, escarpments, harbours, sea, lakes or rivers
Failure to comply with regulations and the highway code
Looking ahead and watching out for obstacles, vehicles or nearby pedestrians| Becoming distracted while riding
Changing direction, making sure to be seen, moderating speed
Anticipating the route and moderating speed while observing the highway code and those that are the most vulnerable
Using direction indicators, if included on the item| Changing direction abruptly at high speed without making sure that you have been seen
Braking and cornering at the same time makes the vehicle unstable
Not using direction indicators
Slowing down when pedestrians are present
Using pedestrian mode in pedestrian areas (6 km/h)
Warning others of your presence by using the bell| Accelerating or maintaining a constant speed when pedestrians are present
Riding without using pedestrian mode in pedestrian areas (6 km/h)
Not warning others of your presence by using the bell
Uneven road conditions: speed bumps/ steps/rough road surfaces| Riding at moderate speeds
Bend knees slightly for better shock absorption when traversing uneven surfaces.| High-speed riding
Accelerating over bumps or ditches, going down steps, jumping over obstacles, climbing pavements, riding harshly.


Behaviour: around bends, down slopes, in the presence of nearby obstacles, vehicles and pedestrians

| Keeping at a safe distance Ceasing to accelerate Braking and slowing down
Riding at moderate speed and braking safely
Paying attention to doors and other high obstacles| Not observing safety distances Accelerating
Riding at high speed, braking suddenly
Traversing beneath high obstacles
Conditions| Appropriate / intended use| Improper use
---|---|---
Visibility conditions| Only ride if there is enough light to ride safely. When riding in unfavourable lighting conditions (from half an hour following sunset, throughout the entire period of darkness and even during the day, if weather conditions preclude road visibility, when driving through tunnels), remember to switch on the item’s lights and wear a reflective vest, belts or bands.| Riding in unfavourable lighting conditions with lights off and without using a reflective vest, belts or bands.
Weather conditions| Driving in optimal conditions (no rain)| Driving in adverse conditions:
in the rain, in case of snowfall, in the presence of ice or mud on the road, in case of strong wind and fog.




Parking

| In designated areas without impeding movement of vehicles or pedestrians
On smooth surfaces, ensuring stability is maintained
Switching off the item and using an anti-theft device
Using the kickstand provided| Everywhere, impeding movement of vehicles or pedestriansOn uneve
n surfaces and without ensuring stability
Leaving the item switched on, unattended with no anti-theft device
Engaging in extreme sports/ acrobatics| NO| YES
Riding near: ravines, escarpments, harbours, sea, lakes or rivers
Riding through puddles Racing with other vehicles
Subjecting the item to forceful impact| NO| YES
jumping over object or persons, jumping off steps or from high places

What to do after a fall:
Check that the accelerator lever works properly. To do this, accelerate and decelerate several times.
Check that the brakes work properly. To do this, get off the item, push it forward and brake to ensure it responds to the controls.
Check that all vehicle components are in place and securely fastened.
Check tyre wear and pressure (see side of tyre for recommended value).
Check the wear of the brakes and cables.
DANGER
The brakes may become hot during use. Do not touch after use.
Assembled item, the handlebar must be installed using the special screws contained in the package.

Package contents and assembly

Model| Reference picture| In the package| Handlebar assembly
---|---|---|---
eSR2 eSR2 EVO| ****


| ** 1x battery charger 2x M5 screws and 2
washers
1x 3 Allen key|
eSR2 Aprilia Smart Movement - assembly
1
****
eSRZ
eSRZ
Safe Ride
eSRZ AS| **| 1x battery charger 4x screws
1x tool kit|

**Tuareg| **| 1x battery charger 2x M5 screws and 2 washers 1x 3 Allen key|

Method:

  • Take the item out of the packaging
  • Open the kickstand and check that the item is stable
  • Open the handlebar stem and secure it by closing the lever of the closing mechanism
  • Connect the display power cable to the main wiring (if necessary)
  • Install the handlebar on the stem (do not crush the cables)
  • Tighten the screws on the stem using the wrench supplied
  • Adjust the steering wheel closing* (if needed)

Steering column stability

Model Reference picture *** Adjustment**

**eSR2 eSR2 EVO
Tuareg| **| There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust the screw in the mechanism, by tightening or loosening it as required to increase the stability of the stem.
**
eSRZ
eSRZ
Safe Ride| **| There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust the screw in the mechanism, by tightening or loosening it as required to increase the stability of the stem.
**
eSR2 EVO (AP-
MO-220006)
****eSRZ AS| **| There is a hex screw inside the mechanism.
If the handlebar stem is not very stable after closing, adjust the screw in the mechanism, by tightening or loosening it as required to increase the stability of the stem.

CAUTION
Assemble the item correctly. If, during assembly, any factory defects are detected, certain steps are unclear or issues with assembly or adjustments occur, do not ride the vehicle and contact your dealer or visit www.apriliasmartmovement.it/en/ for technical support.
Do not use accessories and/or additional parts that are not approved by the manufacturer.
Keep children away from plastic items (including packaging materials) and small parts that may result in suffocation.
It is forbidden to modify or transform the item or any its parts in any way, as this may impair efficiency, reduce structural integrity and cause damage. Remove any sharp edges caused by misuse, breakage or damage to the item. If any factory defects, unusual noises or faults are detected, do not ride the vehicle and contact your dealer or visit www.apriliasmartmovement.it/en/ for technical support.

Product overview

In the interest of technological development, the manufacturer reserves the right to modify the item with no prior notice and this manual will not be automatically updated.
For information and to consult the revisions of this manual, visit the website www.apriliasmartmovement.it/en/ eSR2 – eSR2 EVOeSR2 Aprilia Smart Movement - overview

  1. Display
  2. Brake lever
  3. Controls of the indicators (if present)
  4. Locking catch
  5. Footrest
  6. Fastening clip
  7. Light
  8. Traction wheel
  9. Rear suspension fork
  10. Frame
  11. Stand
  12. Charging port (opposite side)
  13. Free wheel
  14. Drum brake
  15. Front suspension fork
  16. Folding mechanism
  17. Headlamp
  18. Accelerator

eSRZeSR2 Aprilia Smart Movement - overview 1

  1. Display
  2. Fastening clip
  3. Brake lever with bell
  4. Footrest
  5. Locking catch
  6. Light
  7. Disc brake
  8. Free wheel
  9. Stand
  10. Charging port
  11. Traction wheel
  12. Frame
  13. Folding mechanism
  14. Headlamp
  15. Accelerator

eSRZ Safe Ride / eSRZ ASeSR2 Aprilia Smart Movement - overview
2

  1. Display
  2. Locking catch
  3. Brake lever
  4. Accelerator
  5. Electric brake command
  6. Command of the turn signals
  7. Turn signal
  8. Footrest
  9. Steering column locking catch
  10. Light
  11. Disc brake
  12. Free wheel
  13. Stand
  14. Charging port
  15. Traction wheel
  16. Frame
  17. Folding mechanism
  18. Headlamp

TuaregeSR2 Aprilia Smart Movement - overview 3

  1. Display
  2. Brake lever
  3. Command of the turn signals
  4. Locking catch
  5. Footrest
  6. Steering column fastening clip
  7. Light
  8. Traction wheel
  9. Rear suspension fork
  10. Frame
  11. Stand
  12. Charging port (opposite side)
  13. Free wheel
  14. Drum brake
  15. Front suspension fork
  16. Folding mechanism
  17. Headlamp
  18. Accelerator
  19. Turn signal
  20. Brake lever

Battery charging

Prior to using the item for the first time, charge to 100%. Ensure the item, charger, and charging port are dry.
Instructions
– Open the kickstand
– Switch off the item

Model Reference picture Instructions

eSR2 eSR2 EVO
Tuareg| eSR2 Aprilia Smart Movement - overview
4| –   Remove the rubber cover from the charging socket
–   First connect the charger to the mains socket and then to the charging port
–   When the item is fully charged, the light on the charger changes from red (charging) to green (charging complete)
–   After charging, first unplug the charger from the charging port and then from the wall socket
–   Close the rubber protection of the charging port
eSRZ
eSRZ
Safe Ride| eSR2 Aprilia Smart Movement - overview
5| –   Remove the rubber cover from the charging socket
–   First connect the charger to the mains socket and then to the charging port.
–   When the item is fully charged, the light on the charger changes from red (charging) to green (charging complete).
–   After charging, first unplug the charger from the charging port and then from the wall socket.
–   Close the rubber protection of the charging port.

CAUTION
To recharge the item, use the battery charger supplied ONLY

Model| Battery charger model| Output voltage| Charging time
---|---|---|---
eSR2| HLT-180-4201500| 42V – 1.5A| 5-6 h
eSR2 EVO| HLT-180-5462000| 54V – 2.0A| 6-7 h
eSR2 EVO| HLT-180I-5462000| 54.6V – 2A| 6-7 h
eSRZ| FY0684201500| 42V – 1.5A| 4-5 h
eSRZ Safe Ride
eSRZ AS| GJS150-4200150| 42V – 1.5A| 4-5 h
Tuareg| HLT-180-4202000| 42V – 2A| 5 h

Using another type of charger may damage the scooter or entail other potential risks.
Never leave the item unsupervised while it is charging. Do not switch the product on while it is charging.
After each use, fully recharge the battery to extend its useful life. Do not recharge the item immediately after use. Allow the scooter to cool for an hour before recharging.
The item should not be charging for extended periods. Overcharging reduces battery life and poses additional potential hazards.
Allow the vehicle to discharge completely to prevent damage to the battery.
Damage caused by the battery being left uncharged for a long period is irreversible and is not covered by the limited warranty.
Once the damage has occurred, the battery cannot be recharged (the battery must not be dismantled by unqualified personnel, as this could lead to electric shocks, short circuits or even major safety incidents). If the owner is away, e.g. on holiday, and the device is entrusted to a third party, leave it in a partial charge state (20-50% charge), not fully charged.
Carry out regular visual inspection of the charger and charger cables. If the battery charger cable is clearly damaged, do not use it to avoid further damage and/or risks; please contact us for a replacement.
Battery warnings
The battery consists of lithium-ion cells and chemical elements that are hazardous to health and the environment. Do not use the item if it emits odours, substances or excessive amounts of heat. Do not dispose of the item or the battery with household waste. The end user is responsible for the disposal of electrical and electronic equipment and batteries in compliance with all applicable regulations.
Avoid used, defective and/or non-original batteries of other models or brands.
DANGER
Do not leave the battery near fire or heat sources. Fire and explosion hazard.
Do not open the battery or take it apart. Do not strike, throw, or puncture the battery or attach objects onto it.
Do not touch any substances leaking from the battery, as they are deemed hazardous. Do not allow children or pets to touch the battery.
Do not overcharge or short-circuit the battery. Fire and explosion hazard.
Do not immerse or expose the battery to water, rain or other liquids. Do not expose the battery to direct sunlight, excessive heat or cold (for example, do not leave the item or battery in a car in direct sunlight for extended periods of time), or environments containing explosive gases or flames.
Do not carry or store the battery with metal objects such as hairpins, necklaces, etc. Contact between metal objects and battery contacts may cause a short circuit resulting in physical injury or death.

Command information / Control panel

eSR2 / eSR2 EVO / Tuareg eSRZ / eSRZ Safe Ride

Activation of direction indicators (if any)
**** Throttle (A): press down to accelerate.
Power button (B): Press to switch the item on/off.
Brake lever (C): pull the lever to brake
Speed level change: press the button (B) once to select the desired level.
Quickly press 3 times in a row to switch from Km/h to Mph.
Quickly press 4 times in a row to switch from ODO to TRIP.
Lights: press the button (B) twice to switch them on/off.
Bell: press button (D) once to activate it.| eSR2 Aprilia Smart Movement -
overview 7Operation of direction indicators (if present)
Throttle (A): press down to accelerate.
ON button (B): press for 2 seconds to turn on or off the item.
Brake lever / command (C): pull or push down to brake.
Speed level change: press the button (B) twice to select the desired level.
Lights: press the button (B) once to switch them on/off. ODO/Trip: press button (B) 3 times to switch mode Km/h-Mph: press button (B) 4 times to switch mode

eSRZ ASeSR2 Aprilia Smart Movement - overview 8 Accelerator (A):

  • Press down to accelerate. Multifunction button (B):
  • Power on and off: long press to turn the scooter on or off.
  • Lights: press the button once to turn them on or off.
  • Speed level change: press the button twice to select the desired level.
  • Change unit of measurement: quickly press 3 consecutive times to change from Km/h to Mph. Turn signals and horn control (C):
  • Turn signals: to activate them, press the switch once to the right or left, depending on the direction to be indicated. To deactivate the turn signal, move the switch back to the central position.
  • Horn: press the button once or several times to activate it. Brake lever (D):
  • tighten the lever to brake.
Model Reference picture Symbols

**eSR2 eSR2 EVO
Tuareg| ****CAUTION
****Zero Start function:
** The accelerator is activated once the speed of travel exceeds 3 km/h.|


**** 1. Battery Level: The battery level is indicated by 4 bars.
2. Speedometer: Displays the current speed of the scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 – The display shows 1
7. Level 2 – The display shows 2
8. Level 3 – The display shows 3
9. Cruise Control: Speed control. It is activated after the same speed has been maintained for a few seconds. The display emits a short beep.10.
Service light: indicates that maintenance is required by the assistance service
11. Bluetooth light: always on

**eSRZ
eSRZ
Safe Ride| ** CAUTION
**Zero Start function:
The accelerator is activated once the speed of travel exceeds 3 km/h.| ** 1. Battery Level: The battery level is indicated by 4 bars.
2. Speedometer: Displays the current speed of the scooter.
3. ODO: Total distance travelled.
4. TRIP: Single trip distance.
5. Lights indicator light.
6. Level 1 – The display will show the pedestrian symbol.
7. Level 2 – The display will show ECO.
8. Level 3 – The display will show D.
9. Level 4 – The display will show S.
10. Cruise Control: Speed control. It is activated after the same speed has been maintained for a few seconds. The display emits a short beep.
11. Unit of measurement of speed: km/h-Mph
---|---|---
**eSRZ AS| ** Zero Start function:
The accelerator is activated once the speed of travel exceeds 3 km/h.| 1. Speedometer: Displays the current speed of the scooter.
2. Battery level: status of the remaining charge.
3. Pedestrian mode: it helps pushing the vehicle with flashing rear light.
4. Turn signal (sx): light on = left indicator active.
5. Lights: Indicates the status of the scooter’s lights (on or off).
6. Bluetooth: indicates whether or not the scooter is connected to a device via bluetooth.
7. Cruise Control: Speed control. It is activated after the same speed has been maintained for a few seconds. The display emits a short beep.
8. Turn signal (dx): light on: = right indicator active.
9. Speed mode:
Level 1 – light off, pedestrian mode active. Level 2 – green.
Level 3 – white. Level 4 – red
10. Speed measurement unit: displays the speed in km/h or mph.
11. ODO: shows the total distance travelled.

Direction indicators (if present)

Models *|
---|---
eSR2
eSR2 EVO
Tuareg
(left side of handlebars)
eSRZ AS| eSR2 Aprilia Smart Movement - overview 12On models where they are fitted, the direction indicators are placed at the ends of the handlebars (left and right side).
The direction indicators are required to provide early warning of any change in direction while riding.
CAUTION
Before each use of the product, check the correct operation of the direction indicators.
eSRZ
(handlebar right side)
eSRZ
Safe Ride
(handlebar left side)| On models where they are fitted, the direction indicators are placed at the ends of the handlebars (left and right side).
The direction indicators are required to provide early warning of any change in direction while riding.
CAUTION
Before each use of the product, check the correct operation of the direction indicators.

Quick guide

  • Prior to using the item for the first time, charge to 100%.

  • Check tyre pressure (see side of tyre for recommended value). If the item does not reach at least 60% of the declared kms, or the maximum speed within the first 3 months of use, it is likely that the wheels have deflated once more. In this case, restore pressure as indicated.

  • Check and adjust the brakes.

  • Turn on the display.

  • Place the product on a flat surface.

  • Hold the handlebar firmly with both hands. Step onto the footrest with one foot and use the other to give yourself a gentle push and accelerate.
    CAUTION
    Zero Start Function: the throttle is activated once the forward speed exceeds 3 km/h.
    For safety reasons, the item is initially set up to avoid standing starts.

  • When riding the item, tilt body in the riding direction during a turn and slowly turn the handlebars.

  • To stop the item, release the accelerator, pull the brake lever

  • To get off, first stop the item completely. Getting off the moving item can cause injury.

  • Prior to each use, check brakes and any wear, check tyre pressure (see side of tyre for recommended value), wheel wear, accelerator and charge status of battery.

Brake lever position

eSR2 / eSR2 EVO / Tuareg| eSRZ / eSRZ AS / eSRZ Safe Ride (opposite side)
---|---
eSR2 Aprilia Smart Movement - position It is possible to adjust the position of the brake lever, if necessary, by unscrewing the screw (A). Once the position has been adjusted, tighten the screw (A).| eSR2 Aprilia Smart Movement - position
1 The brake lever can be adjusted when needed by unscrewing the screw located underneath (A).
Once the position has been adjusted, tighten the screw (A).

Brake adjustment

eSR2 / eSR2 EVO / Tuareg eSRZ

eSR2 Aprilia Smart Movement - position 2 If the brake is too tight or too loose, adjust it by loosening or tightening the screw (A).
If the brake lever is too soft or too hard even after following the instructions in the first step, it may be necessary to repeat the operation until the optimal setting has been reached.| **![eSR2 Aprilia Smart Movement

  • position 3](https://manuals.plus/wp-content/uploads/2023/10/eSR2-Aprilia- Smart-Movement-position-3.png)** If the brake is too tight or too loose, use the Allen wrench to loosen the screw (A), then adjust the brake cable, (shorten the brake cable at the top if it is too tight; if it is too loose, pull the brake cable downwards) and then, re-tighten the screw (A).
    Check the correct alignment between the brake caliper and the disc. Use the screws (B) and (C) to adjust the position / alignment on the disc, if necessary.

Folding and carrying

Make sure the electric scooter is turned off. Hold the handlebar stem with your hand, pull the lever, fold the stem towards the footrest and fasten it.

eSR2 / eSR2 EVO / Tuareg eSRZ / eSRZ Safe Ride / eSRZ AS

eSR2 Aprilia Smart Movement - position 4| eSR2
Aprilia Smart Movement - position 5

After folding, lift it by holding the handlebar stem with one or both hands.
CAUTION
Make sure to secure the item during transportation. If the item cannot be lifted, do not transport with the item raised. If dropped, the item may cause severe injury and damage.

Range and performance

The maximum range and performance of the vehicle depends on a number of variables:
Terrain: riding on smooth roads provides greater range and performance than riding on rough roads and climbs.
Weight of user: the greater the weight, the lower the range and performance of the vehicle.
Temperature: riding the scooter in very cold or hot conditions affects range and performance.
Speed and riding style: riding smoothly and at constant speed extends the autonomy. Continuous acceleration, deceleration and manoeuvring greatly reduce the range. A lower speed extends the range.
Maintenance: prompt recharging, proper maintenance and regular checking of tyre pressure (see reference value in section 11) increase range and ensure consistent performance over time.
The level of battery charge affects performance – the lower the level, the lower the speed, especially on climbs.

Storage, maintenance and cleaning

CAUTION
If there are stains on the body of the scooter, wipe with a damp cloth. If the stains persist, apply neutral soap, brush out with a toothbrush, then wipe with a damp cloth. If there are scratches on the plastic components, use sandpaper or other abrasive material to remove them. Do not clean the items with alcohol, petrol, paraffin or other corrosive or volatile chemical solvents to prevent severe damage. Do not wash the item using high-pressure water jets. When cleaning the scooter, make sure that it is switched off, that the charging cable is disconnected, and the rubber cap is closed, as a water leak may cause an electric shock or other serious problems. Water seeping into the battery may cause damage to internal circuits and risk of fire or explosion. Should you suspect that water may have entered the battery, stop using the battery immediately and return it to your dealer’s after-sales service for checking.
When the item is not in use, store it indoors in a cool, dry place. Do not store outdoors or inside cars for extended periods of time. Excessive sunlight, overheating, and excessive cold accelerate tyre ageing and jeopardize the life of both the item and the battery. Do not expose it to rain or water or immerse it in water to wash it.
Regularly check the tightness of the bolted parts, in particular wheel axles, the folding and transportation system, the steering system, the braking system, the state of the frame, the forks and the suspension. Nuts and all other self-locking fasteners may lose their effectiveness. Periodically check and tighten these components.
Like all mechanical components, the item is subject to wear and tear. Different materials and components may react to wear or stress fatigue in a variety of ways. If the service life of a component is exceeded, it may break suddenly, resulting in injury to the rider. Any cracks, scratches or changes in colour in areas subject to high levels of stress indicate that the life of the component has been reached and must be replaced.
Check the condition of the tyres: there must be no cuts, cracks, foreign bodies, abnormal swelling, missing parts or other damage. For tyre pressure, refer to the value indicated in section 11 in this instruction manual.
Do not attempt to disassemble or repair the scooter yourself. Replacement of all scooter components should be carried out by the technical service department. For further information, contact your dealer or visit www.apriliasmartmovement.it/en/

App configuration

This item can be used with the Aprilia Smart Movement App. The App allows you to control the item directly from your Smartphone.
Scan the QR CODE to download and install the App. If the App is not found, search for it on your reference App store.
The items with Bluetooth that can be paired with the Aprilia Smart Movement App are the following: Aprilia eSR2, Aprilia eSR2 EVO, Aprilia eSRZ AS, Tuareg.
This item can be used with the Aprilia Smart Movement App. The App allows you to control the item directly from your Smartphone.

https://apps.apple.com/it/app/aprilia-smart- movement/id1577928381https://play.google.com/store/apps/details?id=mtd.aprilia.app&hl=it&gl=US

Open the App and follow the instructions given.
CAUTION
The App may require various permissions required for the use and operation of the App itself.
The App version may have been updated by your App store. It is advisable to constantly check whether any updates are available for the App in order to be able to use the new features and always install the latest version of the App on your device.
Do not use your device while riding.

Technical data sheet

General information eSR2 eSR2 EVO
Frame Aluminium alloy
Sunspensions front and rear
Speed Product code:

AP-MO-210002
AP-MO-210006
AP-MO-210008
L1: ≤ 6km/h
L2: ≤ 20km/h
L3: ≤ 25km/h
(max speed)| Product code:
AP-MO-220004
L1: ≤ 6km/h
L2: ≤ 15km/h
L3: ≤ 20km/h
(max speed)
| Product code:
AP-MO-210003
AP-MO-220006
* L1: ≤ 6km/h
L2: ≤ 20km/h
L3: ≤ 25km/h
(max speed)

Maximum slope
| 23%| 24%
Brakes| Front drum brake and rear electric brake| Front drum brake and rear electric brake
** Tyres| 10” with air chamber
Recommended pressure: 36 psi / 2.5 bar| 10” with air chamber
Recommended pressure: 36 psi / 2.5 bar
Maximum load| 120 kg| 100 kg
Rider| Check the current legislation in your country
Operating temperature| -5 °C/ 45 °C| -5 °C/ 45 °C
Protection level| IPX4| IPX4
Charging time| approx 5/6 hours| approx 6/7 hours
Autonomy
| up to 30km| up to 60km
Electrical system
Rated power of motor| 0.35kW; 350W Brushless, 19.6Nm| 500W; 0.5kW Brushless, 22.9Nm
Maximum power of motor| 0.55kW; 550W| 0.85kW; 850W
Display| built-in colour LED| built-in colour LED
Battery| 36V 8Ah 288Wh| AP-MO-210003: 48V 14.4Ah 691Wh
AP-MO-220006: 48V 15Ah 720Wh
Low voltage protection| 31V| 38V
Current limit| 17A| 17A
KERS| yes| yes
Lights| Front and rear LEDs| Front and rear LEDs
Features| Bluetooth with App|
Dimensions and weight
Net weight| 17 kg| 18.5 kg
Gross weight| 20 kg| 21 kg

  • Always respect the highway code and the regulations in force in the country where the electric scooter is used.
    ** Subject to variations based on the rider’s weight, on the road conditions and on the temperature.
General information eSRZ eSRZ Safe Ride
Frame steel and aluminium steel and aluminium
Sunspensions no no
Speed Product code:

AP-MO-210005
AP-MO-210007
L1: ≤ 6km/h
L2: ≤ 15km/h
L3: ≤ 20km/h
L4: ≤ 25km/h
(max speed)| Product code:
AP-MO-220003
L1: ≤ 6km/h
L2: ≤ 10km/h
L3: ≤ 15km/h
L4: ≤ 20km/h
(max speed)
| Product code:
AP-MO-220009
L1: ≤ 6km/h
L2: ≤ 15km/h
L3: ≤ 20km/h
L4: ≤ 25km/h
(max speed)*
Maximum slope| 21%| 21%
Brakes| Front electric brake and rear disc brake| Front electric brake and rear disc brake
Tyres| 8.5” with front and rear inner tube
Pressure: 50 psi / 3.4 bar| 8.5” with front and rear inner tube
Pressure: 50 psi / 3.4 bar
Maximum load| 100 kg| 100 kg
Rider| Check the current legislation in your country
Operating temperature| -5 °C/ 45 °C| -5 °C/ 45 °C
Protection level| IPX5| IPX5
Charging time| approx. 4 hours| Approx. 4 hours
Autonomy
| Up to 20km| Up to 20km
Electrical system|
Rated power of motor| 0.3kW; 300W Brushless| 0.3kW; 300W Brushless
Maximum power of motor| 0.45kW; 450W| 0.45kW; 450W
Display| built-in colour LED| LED
Battery| 36V 6Ah 216Wh| 36V 6Ah 216Wh
Low voltage protection| 31V ± 0.5V| 31V ± 0.5V
Current limit| 16A| 16A
KERS| yes| yes
Lights| Front and rear LEDs| Front and rear LEDs
Features| –| –
Dimensions and weight|
Net weight| 13.8 kg| 14 kg
Gross weight| 16.9 kg| 17.1 kg

  • Always respect the highway code and the regulations in force in the country where the electric scooter is used.
    ** Subject to variations based on the rider’s weight, on the road conditions and on the temperature.
General information eSRZ AS
Frame Aluminium
Sunspensions no
Speed Product code:

AP-MO-230002
L1: ≤ 6km/h L2: ≤ 15km/h L3: ≤ 20km/h L4: ≤ 25km/h
(max speed)*
Maximum slope| 15%
Brakes| Front electric brake and rear disc brake
Tyres| 8.5” with front and rear inner tube
Pressure: 50 psi / 3.4 bar
Maximum load| 100 kg
Rider| Check the current legislation in your country
Operating temperature| -5 °C/ 45 °C
Protection level| IPX5
Charging time| Approx. 4 hours
Autonomy
| Up to 20km
Electrical system
Rated power of motor| 0.35kW; 350W Brushless, 15Nm
Maximum power of motor| 0,499kW; 499W
Display| built-in colour LED
Battery| 36V 6.6Ah 237Wh
Low voltage protection| 30V ± 0.5V
Current limit| 17A ± 1A
KERS| yes
Lights| Front and rear LEDs
Features| Bluetooth with App
Dimensions and weight
Net weight| 12 kg
Gross weight| 14 kg

  • Always respect the highway code and the regulations in force in the country where the electric scooter is used.
    ** Subject to variations based on the rider’s weight, on the road conditions and on the temperature.
General information Tuareg
Frame aluminium alloy
Sunspensions front and rear
Speed Product code:

AP-MO-220001
L1: ≤ 6km/hL2: ≤ 20km/h
L3: ≤ 25km/h
(max speed)| Product code:
AP-MO-220005
L1: ≤ 6km/h
L2: ≤ 15km/h
L3: ≤ 20km/h(max speed)

Maximum slope**| 14%
Brakes| Front drum brake and rear electric brake

Tyres

| 10” off-road with front and rear inner tubes

Pressure: 50 psi / 3.4 bar

Maximum load| 120 kg
Rider| Check the current legislation in your country
Operating temperature| -5 °C/ 45 °C
Protection level| IPX5
Charging time| approx. 5 hours
Autonomy| Up to 40km
Electrical system
Rated power of motor| 0.35kW; 350W Brushless, 19.6Nm
Maximum power of motor| 0.55kW; 550W
Display| built-in colour LED
Battery| 36V 10.4Ah 374Wh
Low voltage protection| 31V ± 1V
Current limit| 17A
KERS| yes
Lights| Front and rear LEDs
Features| Bluetooth with App
Dimensions and weight**
Net weight| 18 kg
Gross weight| 21 kg

  • Always respect the highway code and the regulations in force in the country where the electric scooter is used.
    ** Subject to variations based on the rider’s weight, on the road conditions and on the temperature.

Troubleshooting

Error Cause Solution
The motor is not running Electrical issue, error code present Request

technical assistance
The drive wheel does not turn| Problems with the brakes Motor is blocked| Adjust the brakes; if the problem persists, request
technical assistance
Check that the wheel is properly tightened, check
that the wheel turns without starting the vehicle. If
the problem persists, request technical assistance
The motor stops while it is running| Motor overheating Presence of error code| Stop the vehicle and wait for it to cool
Request technical assistance
After charging it, the item does not switch on or it switches off after a few km| Damaged battery| Request technical assistance
The battery does not charge or the item does not switch on| Connection problems The battery is not connected (models with removable battery)
The battery is depleted Damaged battery Problems with the battery charger| Request technical assistance Check that the power connector is connected.
Charge the battery to 100% Request technical assistance Replace the battery charger

Error code table

Error Code
eSR2 / eSR2 EVO / Tuareg| Indications| Solution
---|---|---
E01
E02
E03
E04
E05
E06
E07
E08| Engine malfunction
Control unit MOS malfunction
Brake lever sensor malfunction
Throttle malfunction
Low voltage protection
Control unit signal error
Protection from overvoltage
Controller OP malfunction| Request technical assistance
Request technical assistance
Request technical assistance
Request technical assistance
Recharge the battery; if the problem persists,
request technical assistance
Request technical assistance
Switch off the vehicle, wait a few minutes before
restarting it if resetting occurs
Request technical assistance
Error Code
eSRZ / eSRZ Safe Ride| Indications| Solution
---|---|---
E01
E02
E03
E04
E05
E06
E07
E08| Throttle malfunction
Brake lever sensor malfunction
Engine malfunction
Communication error
Overtemperature error
Control unit error
Phase / current error
Battery voltage error| Request technical assistance
Request technical assistance
Request technical assistance
Request technical assistance
Request technical assistance
Request technical assistance
Request technical assistance
Recharge the battery; if the problem persists,
request technical assistance
Error Code eSRZ AS| Indications| Solution
---|---|---
E10
E11
E14
E15
E16
E21
E50
E55| Display communication error
Motor current sensor error
Accelerator sensor error
Brake sensor error
Motor sensor error
BMS communication error
High voltage main line error
Controller high temperature error| Accelerator sensor error
Brake sensor error
Motor sensor error
BMS communication error
High voltage main line error
Controller high temperature error
Indicates an anomaly in the current sensor of the
electric scooter motor. Check the motor wiring or
request technical assistance.
Indicates an anomaly in the acceleration sensor of
the electric scooter. Check the sensor and the wiring
or request technical assistance.
Indicates an anomaly in the brake sensor of the
electric scooter. Check the sensor and the wiring or
request technical assistance.
If the error occurs upon start-up, check that the
motor hall wiring is normal. If it occurs while braking,
check and replace the motor or controller to resolve
the problem or request technical assistance.
Request technical assistance.
If the error occurs upon start-up, check if the battery
voltage is normal. If it occurs when riding, it will be
necessary to replace the battery or the controller to
resolve the problem or request technical assistance.
If the controller temperature is too high, turn the
vehicle off and allow it to cool before restarting it. If
the error occurs on start-up, the controller will need
to be replaced to resolve the problem.

Liability and general terms of warranty

The rider assumes all liability for any injury when not wearing a helmet or other protective devices.
The rider must respect current local regulations regarding:

  1. the minimum age allowed for the driver,
  2. restrictions on the type of drivers who can use the product
  3. to all other regulatory aspects

The driver must always keep the product clean and in a perfect state of efficiency and maintenance, diligently perform the safety checks he/she is responsible for as described in the previous section, not tamper with the product in any way and keep all the maintenance documents.
M.T. Distribution shall not be liable for any damages caused and is in no way responsible for damages caused to property or persons when:
– the item is used incorrectly or in a manner that does not comply with the instructions of the user guide;
– the purchase, the item is modified or tampered with in all or some of its components.”
In case of malfunction of the product for reasons not attributable to improper behaviour of the rider and in case you want to consult the general terms of warranty, please contact your dealer or visit the website www.ducatiurbanemobility.com/  The Legal Guarantee never covers any Product faults or malfunctions caused by accidental events and/or events attributable to the Purchaser, or due to use of the Product in non-compliance with its intended use and/or with the provisions of the technical documentation attached to the Product, or due to failure to regulate mechanical parts, the natural wear of consumable materials, or due to assembly errors, lack of maintenance and/or use of said product in non-compliance with the instructions.
For example, the following are to be considered excluded from the statutory guarantee regarding products:

  • damage caused by impacts, accidental falls or collisions, punctures;
  • damage caused by use, exposure or storage in an unsuitable environment (e.g. presence of rain and/or mud, exposure to humidity or excessive heat, contact with sand or other substances);
  • by failure to adjust for road use and/or maintenance of mechanical parts, mechanical disc brakes, handlebars, tyres, etc.; incorrect installation and/or assembly of parts and/or components;
  • the natural wear and tear of consumable materials: mechanical disc brake (e.g. pads, callipers, disc, cables), tires, platforms, gaskets, bearings, led lights and bulbs, kickstand, knobs, mudguards, rubber parts (platform), wiring cable connectors, grilles and stickers, etc.;
  • improper maintenance and/or improper use of the Product battery;
  • tampering with and/or forcing parts of the Product;
  • incorrect or inadequate maintenance or alteration of the Product;
  • improper use of the product (e.g.: excessive load, use in competitions and/or for commercial or rental activities);
  • maintenance, repairs and/or technical interventions on the product carried out by unauthorised third parties;
  • damage to the products resulting from transport, if carried out by the purchaser;
  • damage and/or defects resulting from the use of non-original parts.

Please consult the most updated version of the warranty terms available on the website www.apriliasmartmovement.it/en/support/
CAUTION
Treatment of the electrical or electronic device at the end of its service life (applicable in all countries of the European
Union and in other European systems with separate collection systems)
** This symbol on the product or packaging indicates that the product should not be considered as normal household waste, but should be taken to a facility authorised to dispose of waste from electrical and electronic equipment (WEEE).
By ensuring the item is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which may otherwise be caused by inappropriate disposal.
Recycling materials will help to conserve natural resources.
For more detailed information about the recycling and disposal of this item, you can contact the local waste disposal service or the point of sale where you purchased it.
In any case, disposal must be carried out in accordance with the legislation in force in the country of purchase.
More specifically, consumers must not dispose of WEEE as municipal waste, but must dispose of this type of waste separately, in one of two possible ways:
• At municipal collection centres (also called eco-collection centres or recycling facilities), directly or through the collection services of municipal companies, where available;
• At shops selling new electrical or electronic equipment.
Here, very small items of the WEEE type (with the longest side less than 25 cm) can be left free of charge, while larger ones can be left on a 1-for-1 basis, i.e., you can leave the old item when you buy a new one having the same function.
Moreover, the 1-on-1 mode is always guaranteed when the consumer purchases a new EEE, regardless of the size of the WEEE.
In the event of unauthorised disposal of electrical or electronic equipment, the sanctions provided for by current environmental legislation may be applied (Italian legislation – check the regulations in effect in the country of use/disposal of the vehicle).
If the WEEE contains batteries or accumulators, they must be removed and subjected to specific separate collection.
CAUTION
Handling of spent batteries (applicable in all countries in the European Union and in other European systems with separate collection systems)
**
This symbol on the product or packaging indicates that the battery pack should not be treated as normal household waste. On some types of batteries, this symbol may be used in combination with a chemical symbol.
The chemical symbols for mercury (Hg) or lead (Pb) are added if the battery contains more than 0.0005% mercury or 0.004% lead.
By ensuring that the batteries are disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which may otherwise be caused by inappropriate disposal. Recycling materials will help to conserve natural resources. In the case of items which, for safety, performance, or data protection purposes, require a fixed connection to an internal battery, said battery should only be replaced by qualified service personnel.
Deliver the product at the end of its service life to collection centres suitable for the disposal of electrical and electronic equipment: this ensures that the battery inside it is also treated correctly.
For more detailed information about disposal of the dead battery, contact the local waste disposal service or the shop where it was purchased.
In any case, disposal must be carried out in accordance with the legislation in force in the country of purchase. ****Declaration of conformity
M.T. Distribution S.R.L
Address: Via Bargellino 10, 40012 Calderara di Reno (BO), Italy
This declaration of conformity is issued under the sole responsibility of the Manufacturer

Product brand: Aprilia
Product model: eSR2
Description of product: Electric scooter

Is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating:
2006/42/EC Machinery Directive
RED 2014/53/EU Radio Equipment Directive
2014/30/EU Electromagnetic Compatibility Directive 2014/35/EU Low Voltage Directive Applicable harmonized standard(s):
EN 60335-1:2012+AC:2014+A11:2014+A13:2017
ETSI EN 301 489-1 V2.2.3:2019-11
ETSI EN 301 489-17 V3.2.4:2020-09
ETSI EN 300 328-1 V2.2.2:2019-07
EN IEC 61000-3-2:2019
EN 61000-6-3:2007+A1:2011
EN 61000-6-1:2019
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019
EN 62479:2010
Factory name: SICHUAN AEE AVIATION TECHNOLOGY CO., LTD.
Factory address: Room 812, enterprise service center, No.17, section 3, west section of Changjiang North Road, Linggang Economic Development Zone, Yibin City, SICHUAN, P.R.C
Date: 25/06/2021
Tecnical file available from EU headquarter
Declaration Place: Bologna, Italy
First name and surname: Alessandro Summa
Position: CEO
MT DISTRIBUTION S.R.L
Via Bargellino 10, 40012, Calderara di Reno (BO), Italy
Authorized person: Alessandro Summa
Position: CEO
Alessandro Summa NOTE:
This declaration of conformity is only applicable to Electric Scooter sold in countries that follow the CE marking directives. **Dectaratton of Conformity
M.T. Distribution S.R.L
Address: Via Bargellino 10, 40012 Calderara di Reno (BO), Italy
This declaration of conformity is issued under the sole responsibility of the Manufacturer
Product Brand: Aprilia
Product Model: eSR2 EVO
Description of product: Electric Scooter is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating:
2006/42/EC Machinery Directive
2014/35/EU Low Voltage Directive
2011/65/EU (ROHS)
2014/30/EU Electromagnetic Compatibility Directive (UE) 2019/1782 (ERP)
Applicable harmonized standard(s):
EN 62479:2010
EN 301 489-1 V2.2.3 (2019-11), EN 301 489-17 V3.2.4 (2020-09)
EN 55032
EN IEC 61000-3-2:2019, EN IEC 61000-4-11:2020
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-11
EN 55035
EN 301489 -17
ETS! EN 300 328 V2.2.2 (2019-07)
EN 300 328 V2.2.2
EN 60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019
ETS! EN 301 489-1 V2.2.3 (2019-11), ETSI EN 301 489-17 V3.2.4 (2020-09)
ETS! EN 300 328 V2.2.2 (2019-07)
EN ISO 12100: 2010
EN 60204-1:2006+AC:2010
EN ISO 13857:2008
EN ISO 13850:2015
EN 953:1997+A1:2009
EN ISO 13849-1:2008
EN 1088:1995+A2:2008
EN 60204-1: 2006+AC:2010
IEC 60335-1:2010+A1:2013+A2:2016
EN 62233:2008
1EC 60417-5172
lEC 61032
IEC 60990:1999
EN IEC 61000-6-1:2019, EN IEC 61000-6-3:2021
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8
EN 55014-1:2017+A11:2020, EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-3:2013+A1:2019, EN 61000-4-2:2009, EN 61000-4-3:2006+A1:2008+A2:2010
EN 61000-4-4:2012, EN 61000-4-5:2006, EN 61000-4-6:2014
IEC/EN 62368-1
IEC 62368-1:2018
EN IEC 62368-1:2020+A11:2020
EN S0581:2012
IEC 62321-5:2013, IEC 62321-4:2013, IEC 62321-7-1:2015, IEC 62321-6:2015, IEC 62321-8:2017
EN 14372:2004
EN S0563:2011/A1:2013
IEC 62133-2:2017
lEC 61960
Factory name: SICHUAN AEE AVIATION TECHNOLOGY CO.. LTD.
Factory address: Room 812, enterprise service center, No.17. section 3, west section of
Changjiang North Road. Linggang Economic Development Zone, Yibin City, SICHUAN, P.R.C
Date: 25/06/2021
Technical file available from EU headquarter
Declaration Place: Bologna, Italy
First name and sumame: Alessandro Summa
Position: CEO
MT DISTRIBUTION S.R.L
Via Bargellino 10, 40012, Calderara di Reno (BO), Itaty
Authorized person: Alessandro Summa
Position: CEO
NOTE: This declaration of conformity is only applicable to Electric Scooter sold in countries that follow the CE marking directives. **

EC Declaration of Conformity
according to the EC Machinery Directive 2006/42/EC, Annex II 1.A.
PLATUM by M.T. Distribution S.R.L
Address: Via Bargellino 10 c/d, 40012 Calderara di Reno (BO), Italy
This declaration of conformity is issued under the sole responsibility of the Manufacturer
Product Brand: Aprilia
Product Model: eSRZ
Description of product: Electric Scooter
Serial identification number(s) : APMNXX2X0XXXXX
The object of the declaration described above fulfils all the relevant provisions of the following
Directives:
2006/42/EC Machinery Directive
2014/30/EU EMC on the harmonization of the laws of the Member States relating to electromagnetic compatibility.
2011/65/EU RoHS on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Applicable harmonized standard(s):
EN IEC 63000:2018
Other standard or technical specifications applied
EN 17128:2020
Manufacturer: Zhunhai Chang Jing Trade Co., Ltd
Address: Room 2-502 HGSS Building, Ianpu Road, XiangZhou Area, Zhunhai City, China 519000
Date: 29/11/2021
PLATUM.COM
HEADQUARTERS: VIA BARGELLINO 10 C/D – 40012 CALDERARA DI RENO (BO)
SALES OFFICE: VIA PARACELSO 24, PALAZZO CASSIOPEA 2 – 20864 AGRATE BRIANZA (MB)
MARCHIO REGISTRATO DI M.T. DISTRIBUTION SRL P. IVA 04177060375 CF 01119840377 REA BO-236546
Authorized Representative in the EU:
MT DISTRIBUTION S.R.L
Via Bargellino 10, 40012, Calderara di Reno (BO), Italy
Technical file available from EU headquarter
Declaration Place: Bologna, Italy
Authorized person – First name and surname: Alessandro Summa
Position: CEO NOTE:
This declaration of conformity is only applicable to Electric Scooter sold in countries that follow the CE marking directives. **EC Declaration of Conformity
according to the EC Machinery Directive 2006/42/EC, Annex II 1.A.
PLATUM by M.T. Distribution S.R.L
Address: Via Bargellino 10 c/d, 40012 Calderara di Reno (BO), Italy
This declaration of conformity is issued under the sole responsibility of the Manufacturer
Product Brand: Aprilia
Product Model: eSRZ Safe Ride
Description of product: Electric Scooter
Serial identification number(s) : APMNXX2X0XXXXX
The object of the declaration described above fulfils all the relevant provisions of the following Directives:
2006/42/EC Machinery Directive
2014/30/EU EMC on the harmonization of the laws of the Member States relating to electromagnetic compatibility.
2011/65/EU RoHS on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Applicable harmonized standard(s):
EN IEC 63000:2018
Other standard or technical specifications applied
EN 17128:2020
Manufacturer: Zhunhai Chang Jing Trade Co., Ltd
Address: Room 2-502 HGSS Building, Ianpu Road, XiangZhou Area, Zhunhai City, China 519000
Date: 01/03//2023
Authorized Representative in the EU:
MT DISTRIBUTION S.R.L
Via Bargellino 10, 40012, Calderara di Reno (BO), Italy
Technical file available from EU headquarter
Declaration Place: Bologna, Italy
Authorized person – First name and surname: Alessandro Summa
Position: CEO
NOTE:**
This declaration of conformity is only applicable to Electric Scooter sold in countries that follow the CE marking directives. EC Declaration of Conformity
according to the EC Machinery Directive 2006/42/EC, Annex II 1.A.
This declaration of conformity is issued under the sole responsibility of the manufacturer.

Manufacturer:| Wuyi Jinyue Engine Science and Technology Co., Ltd.
No.1 Rose Road, Wuyi County, Jinhua City, Zhejiang Province, China
---|---
Authorized representative:| Platum By MT Distribution S.r.l
Via Bargellino 10 C/D, 40012, Calderara di reno (BO)
Person authorized to compile the technical file:| Platum By MT Distribution S.r.l
Via Bargellino 10 C/D, 40012, Calderara di reno (BO)

Object of the declaration:

Model code| Generic denomination| Commercial name| Trademark| Serial identification number (s) and/or batch number (s)
---|---|---|---|---
AP-MO-230002| Electric Scooter| ESRZ AS| APRILIA| APMN2XXXM00001 to
APMN2XXXMXXXXX

The object of the declaration described above fulfils all the relevant provisions of the following Directives:
2006/42/EC Machinery Directive
2014/53/EU Radio Equipment Directive on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment.
2011/65/EU RoHS on the restriction of the use of certain hazardous substances in electrical and electronic equipment
Harmonized standards or other technical specifications applied:

EN 300 328 V2.2.2 EN 63000:2018
EN 301 489-1 V1.9.2 EN 17128:2020
EN 62479:2010 ETSI EN 301 489-17 V3.2.4
EN 62368-1:2014 +AC:2015

Place of issue
Calderara di Reno (BO), Italy
Date of issue
14/06/2023
Name, function, signature
Alessandro Summa, CEO Translation of the original Declaration of Conformity

EC Declaration of Conformity
according to the EC Machinery Directive 2006/42/EC, Annex II 1.A.
PLATUM by M.T. Distribution S.R.L
Address: Via Bargellino 10 c/d, 40012 Calderara di Reno (BO), Italy
This declaration of conformity is issued under the sole responsibility of the Manufacturer
Product Brand: Aprilia
Product Model: Tuareg
Description of product: Electric Scooter
Serial identification number(s) : TGMN1XXX0XXXXX
The object of the declaration described above fulfils all the relevant provisions of the following
Directives:
2006/42/EC Machinery Directive
2014/53/EU Radio Equipment Directive on the harmonization of the laws of the Member States relating to the making available on the market of radio equipment.
2011/65/EU RoHS on the restriction of the use of certain hazardous substances in electrical and electronic equipment Applicable harmonized standard(s):
EN 300 328 V2.2.2
EN 301 489-1 V1.9.2
EN 62479:2010
EN 62368-1:2014 +AC:2015
EN IEC 63000:2018
Other standard or technical specifications applied
EN 17128:2020
ETSI EN 301 489-17 V3.2.4
Manufacturer: SICHUAN AEE AVIATION TECHNOLOGY CO.LTD.
Address: Room 812, enterprise service center, No.17, section 3, west section of Changjiang North Road, Linggang Economic Development Zone, Yibin City, SICHUAN, P.R.C
Date: 08/09/2022

Authorized Representative in the EU:
MT DISTRIBUTION S.R.L
Via Bargellino 10, 40012, Calderara di Reno (BO), Italy
Technical file available from EU headquarter
Declaration Place: Bologna, Italy
Authorized person – First name and surname: Alessandro Summa
Position: CEO Imported and distributed by
M.T. Distribution Srl
via Bargellino 10c/d, 40012,
Calderara di Reno, (BO) Italy
www.platum.com
Aprilia®
is a registered trademark owned by Piaggio & C. S.p.A.
and used under license by M.T. Distribution Srl
Errors and omissions excepted

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals