APRILIA B0CHRFT2B8 24V Brushless Electric Kids Motorcycle Instruction Manual

APRILIA B0CHRFT2B8 24V Brushless Electric Kids Motorcycle

Product Information

Specifications

Product Assembly

Tools Required

• Metal Wrenches

Parts Included

• A – Foot Pedals x 14
• B – Training Wheels x 2
• C – Front Wheel x 1
• D – Front Wheel Lock x 1
• E – Front Fork x 1
• F – Front Mudguard x 1
• G – Front Axle x 1
• H – Handlebar x 1
• I – Side Mirrors x 2
• J – Front Frame x 1
• K – Side Leaf-plates x 2
• L – Tail-light x 1
• M – Seat x 2
• N – Plastic Cap x 1

Product Usage Instruction

Assembly Steps

1. Flip the vehicle over and lay it on a level surface. Remove all parts and packaging from the vehicle body.
2. Connect the right-foot pedal brake cable. Insert both foot pedals into the vehicle body, aligning them with the slots and snapping them tight. Make sure to hide the extra length of wire in the harness hole.
3. Align the training wheels with the slots beside the foot pedal. Secure them with 3 long screws and 4 short screws.
4. Slide the front fork into the front wheel lock. Then snap the front wheel onto the front fork.
5. Insert the front axle into the front wheel and secure it with 2 nuts and 2 spacers/washers. Slide the front mudguard into the front fork.
6. Insert the already assembled front wheel set into the vehicle body. Connect the accelerator power wire, making sure to hide the extra length of wire in the harness hole. Slide the handlebar into the front fork axle and secure them with 2 spacers/washers and 1 nut. Finally, cover it with a plastic cap.
7. Attach 2 side mirrors with 2 screws to the front frame, 1 screw per mirror. Mount the front frame set to the vehicle body with 4 screws. Connect the light power wire, making sure to hide the extra length of wire in the harness hole.
8. Connect the motorcycle power cord and test the power cord connection for proper operation.

Attention

A:

1. Connect picture 1, the power connector, before assembling the seat.
2. Use the key start switch to turn on the vehicle. Otherwise, the car will not start due to no power supply.

Frequently Asked Questions (FAQ)

• Q: How long should I charge the motorcycle before initial use?
  A: Please charge for 12 hours before initial use.

• Q: Can I use this motorcycle on any surface?
  A: For best performance, only use this vehicle on flat and hard surfaces.

• Q: What is the weight capacity of this motorcycle?
  A: The weight capacity is 150 lbs.

• Q: What is the recommended age range for this motorcycle?
  A: The recommended age range is 4-10 years old.

APRILIA motorcycle

If you have a future motorcycle rider in your life, we have the most amazing gift for you. This is a kid’s electric ride-on motorcycle. It is an Aprilia motorcycle miniature. It is ideal option for your little kids to ride on.

Please charge for 12 hours before initial use. After the initial charge follow the charging time on the specifica-tions.

SAFETY

• This vehicle must be assembled by an adult who has read and understood the instructions in this manual.
• Keep the packaging and bags away from children and dispose of all packaging before use. Always use common sense and safe practices when operating this vehicle.

NOTE:
For best performance, only use this vehicle on flat and hard surfaces. The following [safety hazards] may result in serious injury or death:

• Never open the battery. Batteries contain lead and lead compounds (acids) that are toxic and corrosive.
• Do not leave a child unattended during the operation. Do not use this in a location that may require braking capability, as this could result in loss of control, which may cause serious injury or death.
• Use of this vehicle in unsafe conditions such as snow, rain, loose dirt, mud, sand, or gravel may result in an unexpected accident such as tipping over and could damage the electrical system or battery.
• Do not operate this vehicle in an unsafe manner. Examples include but are not limited to:
  • Pulling the vehicle with another vehicle or similar device
  • Allowing more than one rider
  • Pushing the user
  • Travelling at an unsafe speed

SPECIFICATIONS

The data below are for all products in the 3088 series. For reference only. Exact specifications are subject to the purchase page.

CARING FOR YOUR RIDE-ON

• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Do not leave the vehicle in the sun for long periods or fading may occur. Store in the shade or cover with a tarp.
• Keep away from fire.
• Do not wash the vehicle with a hose.
• Do not wash the vehicle with soap.
• Charge the battery at least once a month to prolong the life of the battery.

WARNING
ADULT ASSEMBLY REQUIRED

WARNING
CHOKING HAZARD – SMALL PARTS. NOT FOR CHILDREN UNDER 3 YEARS OLD.

TOOLS REQUIRED

HARDWARE

PARTS

PRODUCT ASSEMBLY

1. Flip vehicle over and lay it on a level surface. Remove all parts and packaging from the vehicle body. Connect the right-foot pedal brake cable. Insert the [2 Foot Pedals] on both sides into the vehicle body(Align with the slot and snap it tight. Moreover take care to hide the extra length of wire in the harness hole).

2. Beside the foot pedal, align the [Training Wheels] with the slot.Fixed with 3-long screws and 4-short screws.

3. Slide the [Front Fork] into the [Front Wheel Lock]. Then snap onto the [Front Wheel].

4. Insert the [Front Axle] into the front wheel and secure it with 2 nuts and 2 spacers/washers. Slide the [Front Mudguard] into the front fork.

5. Insert the already assembled front wheel set into the vehicle body. Connect the accelerator power wire(Take care to hide the extra length of wire in the harness hole). Then slide the [Handlebar] into the front-fork axle and put in 2 spacers/washers and 1 nut to secure them. Finally, cover it with a [Plastic Cap].

6. Attach [2 Side Mirrors] with 2 screws to [Front Frame], 1 screw per mirror. Mounting the front frame set to the vehicle body with 4 screws. And connect the light power wire (Take care to hide the extra length of wire in the harness hole).

7. Connect the motorcycle power cord. And test the power cord connection for proper operation.
   ATTENTION

8. Please connect picture 1, the power connector before assembling the seat. Then use the key start switch to turn on the vehicle.

9. Otherwise, the car will not start because of no power supply.

10. After charging, please unplug the charger first. Then use the key start switch to turn on the vehicle.

11. Otherwise, the car will not start because of no power supply.

12. Test the power cord is connected properly and then install the [Seat] with 2 screws. Then attach the [Tail-light] with 2 screws. Finally, install the [2 Side Leaf-plates].

DASHBOARD DIAGRAM

Push down on the pedal to drive forward/reverse. Release the pedal to slow down and stop.

TROUBLESHOOTING

BLUETOOTH

1. Put your audio device near the media player and turn the car on.
2. Press Mode on the media player and wait until you pair your device through bluetooth successfully
3. Then select your desired song on your device playing it

QR CODE for product installation explanation

Kids Ride-On Motorcycle with Training Wheels.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>