APRILIA 3088-24V BRUSHLESS Kids Electric Ride On Motorcycle Instruction Manual

APRILIA 3088-24V BRUSHLESS Kids Electric Ride On Motorcycle

Specifications

• Weight Capacity: 150 lbs
• Age Range: 4-10 years old
• Max Speed: 2.5-16 MPH
• Charging Time: 8-12 hours
• Run Time: 1-3 hours
• Battery Type: 24V8AH
• Electric Motor: 24V Brushless Output: DC 24V
• Charger Material: PP+Metal

Product Usage Instructions

Caring for Your Ride-On

• ADULT ASSEMBLY REQUIRED
• CHOKING HAZARD – SMALL PARTS. NOT FOR CHILDREN UNDER 3 YEARS OLD.

Tools Required
Metal Wrenches

Assembly

PARTS A:

• Foot Pedals (14 PCS)
• Training Wheels (3 PCS)
• Front Wheel (4 PCS)

PARTS D:

• Front Wheel Lock (2 PCS)
• Front Fork (1 PC)
• Front Mudguard (1 PC)
• Front Axle (1 PC)
• Handlebar (1 PC)
• Side Mirrors (2 PCS)
• Front Frame (1 PC)
• Side Leaf-plates (2 PCS)
• Tail-light (1 PC)
• Seat (2 PCS)
• Plastic Cap (1 PC)

Product Assembly

1. Flip vehicle over and lay it on a level surface.
2. Remove all parts and packaging from the vehicle body.
3. Connect the right-foot pedal brake cable.

Frequently Asked Questions (FAQ)

• Q: How long should I charge the motorcycle before initial use?
  A: Please charge for 12 hours before initial use.

• Q: What surfaces are recommended for using the ride-on motorcycle?
  A: For best performance, only use this vehicle on flat and hard surfaces.

APRILIA
motorcycle

If you have a future motorcycle rider in your life, we have the most amazing gift for you. This is a kids electric ride-on motorcycle. It is aprilia motorcycle miniature. It is ideal option for your little kids to ride on.

Please charge for 12 hours before initial use. After initial charge follow the charging time on the specifica-tions.

SAFETY

This vehicle must be assembled by an adult who has read and understood the instructions in this manual.
Keep the packaging and bags away from children and dispose of all packag-ing before use. Always use common sense and safe practices when operating this vehicle.

NOTE : For best performance, only use this vehicle on flat and hard surfaces. The following [safety hazards] may result in serious injury or death:

• Never open the battery. Batteries contain lead and lead compounds (acids) that are toxic and corrosive.
• Do not leave a child unattended during operation. Do not use this in a loca-tion that may require braking capability, as this could result in loss of control, which may cause serious injury or death.
• Use of this vehicle in unsafe conditions such as snow, rain, loose dirt, mud, sand, or gravel may result in an unexpected accident such as tipping over, and could damage the electrical system or battery.
• Do not operate this vehicle in an unsafe manner. Examples include but are not limited to:
  • Pulling the vehicle with another vehicle or similar device
  • Allowing more than one rider
  • Pushing the user
  • Traveling at an unsafe speed

SPECIFICATIONS

The data below are for all products in the 3088 series. For reference only. Exact specifications are subject to the purchase page.

CARING FOR YOUR RIDE-ON

• Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
• Do not leave the vehicle in the sun for long periods of time or fading may occur. Store in shade or cover with tarp.
• Keep away from fire.
• Do not wash the vehicle with a hose.
• Do not wash the vehicle with soap.
• Charge battery at least once a month to prolong the life of the battery.

WARNING
ADULT ASSEMBLY REQUIRED

WARNING
CHOKING HAZARD – SMALL PARTS. NOT FOR CHILDREN UNDER 3 YEARS OLD.

TOOLS REQUIRED

HARDWARE

PARTS

PRODUCT ASSEMBLY

1. Flip vehicle over and lay it on a level surface. Remove all parts and packaging from the vehicle body.
   Connect the right-foot pedal brake cable.Insert the [2 Foot Pedals] on both sides into the vehicle body(Align with the slot and snap it tight. Moreover take care to hide the extra length of wire in the harness hole).

2. Beside the foot pedal, align the [Training Wheels] with the slot.Fixed with 3-long screws and 4-short screws.

3. Slide the [Front Fork] into the [Front Wheel Lock]. Then snap onto the [Front Wheel].

4. Insert the [Front Axle] into the front wheel and secure it with 2 nuts and 2 spacers/washers.
   Slide the [Front Mudguard] into the front fork.

5. Insert the already assembled front wheel set into the vehicle body. Connect the accelerator power wire(Take care to hide the extra length of wire in the harness hole). Then slide the [Handlebar] into the front-fork axle and put in 2 spacers/washers and 1 nut to secure them. Finally cover with a [Plastic Cap].

6. Attach [2 Side Mirrors] with 2 screws to [Front Frame], 1 screw per mirror. Mounting the front frame set to the vehicle body with 4 screws. And connect the light power wire (Take care to hide the extra length of wire in the harness hole).

7. Connect the motorcycle power cord. And test the power cord connection for proper operation. ATTENTION

8. Please connect picture 1,the power connec-tor before assembling the seat.Then usinng the key start switch to turn on the vehicle.

9. Otherwise,the car will not start because of no power supply.

10. After charging,please unplug the charger first.Then usinng the key start switch to turn on the vehicle.

11. Otherwise,the car will not start because of no power supply.

12. Test the power cord is connected properly and then install the [Seat] with 2 screws. Then attach the [Tail-light] with 2 screws.Finally install the [2 Side Leaf-plates].

DASHBOARD DIAGRAM

Push down on the pedal to drive forward/reverse. Release the pedal to slow down and stop.

TROUBLESHOOTING

Vehicle does not move

| Low battery| Fully charge the battery
Electrical protection| Stop use for several minutes and restart
Switch not in the correct position| Completely press in switches
Battery connectors disconnected| Plug in battery connectors
Battery does not recharge| Battery connectors disconnected| Plug in battery connectors
Charger not connected to socket or outlet| Completely plug in the charger
Battery does not last| Battery does not have a full charge| Fully charge the battery
Battery is warm and makes a slight noise while charging| Normal| Normal
Slow speed| Low battery| Fully charge the battery
Overloaded vehicle| Reduce the weight on the vehicle
Uneven or sloped road| Drive on flat pavement
Vehicles shakes while driving| Loose connection to motor| Ensure the motor is properly connected to the battery

BLUETOOTH

1. Put your audio device near the media player and turn the car on.
2. Press Mode on the media player and wait until you pair your device through bluetooth successfully
3. Then select your desired song on your device playing it

QR CODE for product installation explanation

THANKS FOR YOUR CHOICE

APRILIA
MOTORCYCLE FOR KIDS 24V BATTERY POWER

Kids Ride-On Motorcycle with Training Wheels

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>