Sami WS-2349 WEARABLE Smartwatch User Manual

WEARABLE
User Manual
WS-2349

Thank you for purchasing the Sami Wearable WS-2349. Read the instructions carefully to obtain optimum results and preserve it for future reference. Sami has developed wearable devices since 2015 and we use the best components possible for the product.

DESCRIPTION OF THE WEARABLE

CONTENTS

Wearable, USB magnetic charging cable, strap tool, instruction manual.

CHARGING

Connect the device to a computer or laptop with the USB magnetic charging cable for charging. Insert the charging thimbles of the charger into the charging points positioned in the back of your device. Kindly use only the USB cable included with the wearable. If you use a power adapter for charging, the output of the power adapter should be 5V, 1A. Charging time: 2 hours. Please charge the device fully before using it.

NOTE: Do not have the charger connected to AC and the magnets touching any metallic surface, this will create high heating of the cable and will damage it.

HOW TO POWER ON / POWER OFF?

1. To turn ON the smart band, long-press the Power On/Off button for a few seconds to make it Power On.
2. To turn OFF the smart band, long-press the Power On/Off button to make it Power Off; or on the touchscreen, tap, and slide from bottom to top until the system icon displays, tap it to enter, scroll down and tap in the Power Off icon, select Yes to make it Power Off.

HOW TO CONTROL IT?

1. On the display screen(touchscreen), short tap the touchscreen to select; tap and slide left/right/up/down to change between the different menu pages.
2. Short press the Power On/Off button to return. Long press the Power On/Off Button to make it Power On/Off.
3. Short press the return button to go back.

GETTING STARTED:

– For Android

1. How to obtain the BT Connection APK (WEARFIT 2.0) Search for the WEARFIT 2.0 APP in the Google Play Store; download it and install it in your Android smartphone, or go to our website www.sami.es and download the application.

2. Installation of the WEARFIT 2.0 APK.
   When installing the WEARFIT 2.0 application on your Android, you must allow all the Application Permissions, allow this WEARFIT 2.0 app autorun. The first time you run this WEARFIT 2.0, it will ask you to Enable Notifications, please tap OK and tap the WEARFIT 2.0 and confirm OK. You must tap OK/Allow/Pair/Yes/Confirm for any pop-up request. On your Android permission management, allow all application permissions.

3. How to make the wearable pair with your Android smartphone?

First, turn on the Bluetooth of your Phone.
Second, run the WEARFIT 2.0 app on your Phone, on the home page of WEARFIT 2.0, select “Third-party log in” and select the social network that appears to log in with this one in the app. Or you can use an email address to register and to log on.
Once you open the app select the “me” icon which is on the right bottom of the interface tap Connection Management tap again Connect band, and then the APP will search for Bluetooth device(s), when the available Bluetooth device displays, please tap B3P or WS-2349 (the BT name of this device) to make it pair. The pairing will be finished in a few seconds. When you finish selecting OK/Confirm/Allow for any pop-up request.

• Now you can start using your desired functions of the smart band.

Important: To enable all notifications of different software such as WhatsApp, Facebook, Skype, and Twitter, you may need to turn on the notifications on the APP manually. On the home page of WEARFIT 2.0, select the “me” icon situated on the right bottom of the screen, and select ‘’Device management’’, ‘’ Smart reminder’’, ‘’app notification’’, and turn on all the APP notifications you want to activate.

– For iPhone

1. How to obtain the BT Connection APP? (WEARFIT 2.0) On iPhone, please go to APP Store and search WEARFIT 2.0 and install the app.
2. How to make the wearable pair with your iPhone?

*First, turn on the Bluetooth of the iPhone

• Run the WEARFIT 2.0 app on the iPhone, on the home page of WEARFIT 2.0, select “Third-party log in” and select the social network that appears to log in with this one in the app. Or you can use an email address to register and to log on.
  Once you open the app tap the “MINE” icon which is on the right bottom of the interface tap Connection Management tap again ”Bind Bracelet”, and then the APP will search for Bluetooth device(s), when the available Bluetooth device displays, please tap B3P or WS-2349 (the BT name of this device) to make it pair. The pairing will be finished in a few seconds. When you finish selecting OK/Confirm/Allow for any pop-up request.
• Now you can start using your desired functions of the smart band.

Important: To enable all notifications of different software such as WhatsApp, Facebook, Skype, and Twitter, you may need to turn on the notifications on the APP manually. On the home page of WEARFIT 2.0, select the “MINE” icon situated on the right bottom of the screen, and select ‘’Device management’’, ‘’ Intelligent reminder’’, ‘’app notification’’, and turn on all the APP notifications you want to activate.

ATTENTION: In IOS and in Android your wearable should be connected through the app and not with the Bluetooth menu of your phone. If you have paired it on the Bluetooth menu, unpair it and forget the device to start the correct binding through the app.

PRODUCT FEATURES

BLUETOOTH (V 4.2)
FULL TOUCH SCREEN. Capacitive touch screen 1.28″
BUILT-IN VIBRATING MOTOR
BUILT-IN HEART RATE SENSOR
BUILT-IN GRAVITY SENSOR
GESTURE CONTROL TO LIGHT UP THE DISPLAY SCREEN

DISPLAY SCREEN INTERFACE

1. Time/Date/ Battery /Steps/Heart rate

2. Clock Screens – six different home digital clocks; in the main screen, long-press the display screen to change it.

3. Messages

4. Sports mode – including Running/ Cycling/ Climbing/Basketball/ Football/ Badminton

5. Sleep, monitor

6. Blood Oxygen (SPO2) test

7. Blood pressure test

8. Heart rate monitor

9. Settings

10. Find your phone

11. Music Control

12. Stopwatch

13. Remote camera- support at APK/APP WEARFIT 2.0

14. Weather – It will be displayed only after your smart band is successfully paired with your mobile phone.
    NOTE: The weather icon may not appear if your smartphone’s network (WIFI/Data Connection) is not in good connection.

15. Flashlight

16. Brightness adjustment

17. Do not disturb mode

18. Vibration adjustment

Data can be synced from the wearable to the smartphone on the WEARFIT 2.0 APK/APP.
Your smartphone will synchronize when the Bluetooth is paired with this device.

FUNCTIONS

PHONE CALL NOTIFICATION – a vibrating reminder for incoming phone calls
MESSAGE NOTIFICATION – a vibrating reminder for incoming messages, including SMS, WhatsApp, Facebook, Twitter, Skype messages, etc. You may need to turn it on at APP.
CLOCK SCREENS -six different home digital clocks; in the main screen, long-press the button to change it.
SLEEP MONITOR – supported on the WEARFIT 2.0 APK/APP. This function automatically runs at night, and the data generates in the mornings.
ALARM CLOCK – supported on the WEARFIT 2.0 APK/APP
SEDENTARY REMINDER(REMIND TO MOVE) – supported on the
WEAR IT 2.0 APK/APP
FIND THE DEVICE (Looking for the SMART BAND) – supported on the WEARFIT 2.0 APK/APP
GESTURE CONTROL (Raise your hand to light up the screen. Before using this function, you may need to turn it on at the smartphone APP)
GPS MAP TRACE (view it on the BT APP/APK WEARFIT 2.0). On the home page of the WEARFIT 2.0, tap the icon “Find/Discovery” which is on the middle bottom of the interface tap the “Exercise” icon tap Start tap the map icon to view the GPS MAP Trace. GPS TRACE HISTORY can be shared to Facebook and other APPs. This function GPS MAP TRACE won’t be available until the APP WEARFIT 2.0 is log on via Facebook or via email address.

Note: The text and icons in the smart band will be always in the English language

**** THIS IS NOT A MEDICAL INSTRUMENT, SO THE VALUES ARE APPROXIMATE

CLEANING:
In order to avoid any damage to the plating or printing of your wearable please do not use any chemical product for cleaning such as alcohol 96º. We recommend you to use a slightly wet cloth.

TECHNICAL SPECIFICATIONS:

Display screen: Capacitive FULL touch screen 1.28″.
Screen resolution: 240×240 pixels.
Internal Memory: RAM 128KB, ROM 512KB
System: Nucleus
CPU: HS6620
Charge I/O port: USB magnetic charging cable
Battery: Built-in Li-Polymer 200 mAh
Stand by time: 10~15 DAYS
Working time: 5 DAYS
Bluetooth: 4.2
Water-resist Rating: IP67 (this device resists raindrops, it’s not waterproof)
Weight: 190 g

Declaration of Conformity

Hereby we,

declare that this DoC is issued under our sole responsibility and that this product:

is in conformity with the relevant Union harmonization legislation:

DIRECTIVE EMC 2014/30/EU
DIRECTIVE LVD 2014/35/EU

Standard CE (RED): DIRECTIVE 2014/53/EU
Standard RoHS: 2011/65/EU: (RoHS) Restriction of Hazardous Substance.

EN 60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328 V2.1.1 (2016-11)

Signature
Full name: VISHAL MIRPURI
Position: ADMINISTRATOR
Date: 15 / 07 / 2020

References

• SAMI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>