Micronet ELQ-HDP001A HDMI to DisplayPort Cable User Manual

HDMI A/M TO Displayport/M CABLE
HDMI signal to DP signal conversion Cable
Conversion line for injection molding of aluminum shell
User’s Manual
Model:ELQ-HDP001A

Introduction

Thanks to buy HDMI DP transformation line series products, the cable will take you on a computer or other device with HDMI hd digital signal into DP interface hd audio and video signal, and with the show end of DP interface (large screen monitor or projector) video synchronous transmission, if necessary can access this product comes with USB cable, HDMI interface with DP interface to communication each other, also solved the differences of two interface can’t
compatible problem.
This product by the HDMI connection signal source, DP access to display video output port, the other with a USB cable can be connected to the USB port of this product conversion chip for power supply equipment can not access (part),
implements the HDMI signal source with DP effective docking, the output in use process without additional access other cable and install the driver of the outside world, the output resolution up to 3840 x2160 @ 60 hz.

SPECIFICATIONS

Cable:1 M-5M
weight| Depending on the length of the cable
Environmental Science| working temperature Operating humidity
Storage temperature Storage humidity| -20°C to +60°C
10%-85RH(non-condensing)
-10°C to +80°C
5%-90%RH(non-condensing)
Rated work voltage| DC5V/1A Max
Power consumption| 1W Max
Packing accessories| Instructions Product
Output port support| Video port output is 480P. 720P. 10801,1080R4K . Maximum support for 3840X2160ft60Hz resolution
Input port support| Support HDMI 1.1/1.2/1.3/1.4/2.0
Input / output port| Signal input: HDMI Type-A male plug: LISS A/M(Power) Signal output: DisplayPort Male plug

Features

1. One cable is used for connection, and signal conversion can be realized without external connection of other cables.
2. Support hot plug and pull, plug and play, no need to install any driver.
3.  Both ends of aluminum alloy injection molding, excellent heat dissipation effect, more stable signal, longer service life
4. Six-layer circuit setting, over-current protection and instantaneous current protection device, super compatibility.
5. Super stable original chip, low power consumption, no radiation, energy saving and environmental protection. The output quality after conversion is more lifelike
6. Multi-scenario application, multi-system support, support Win/l0S/Android
7. High quality gold-plated joint is adopted at both ends, and the standard cable design makes the signal transmission more stable.
8. Adopt the current popular aluminum alloy one-piece injection structure, anti fall, waterproof, anti vibration.
9. Equipped with a USB cable for power supply, it can effectively support the old equipment or the equipment with insufficient power supply to work normally.

Structure

1. Displayport main signal cable
2. USB A/M Power In
3. USB AIM Plug
4. HDMI Type-A plug/signal input
5. DisplayPort plug/signal output

User Operation

A) connect the product’s HDMI connector to your computer o other device with an HDMI base port.
B) connect the DP end of the product to the display device (video screen output end).
C) remember to adjust the display port to the port signal input source you are connected to.
D) connect the built-in USB cable of the product to +5V voltage (if necessary) through the USB cable.
E) you can switch replication mode or extension mode according to your needs.

Application:

This product is a consumer electronics products, you can be with HDM interface signal output device, such as computers, laptops. Hd player. Hd set-top boxes. The PS3. The Xbox360, etc under the condition of without adding any other connections with DP interface connected to the display output devices, allows you to easily solve the problem of inconsistent interface; Video is synchronized with audio, no loss, no delay, and the maximum signal output supports 3840×2160@60hz. According to your actual situation, you can switch between replication mode and expansion mode in video screen

Connection diagram

Note :

1. Do not hit the product with blunt or gravity; do not throw the product at high altitude; do not throw the production humid, high temperature and other adverse environment
2. Before accessing this product, please con rm whether your computer has set the correct signal of the display port.
3. The input interface of this product is hdmi-type A, please con rm whether your device has this interface HDMI type-c and HDMI type-d will not be accessible.
4. It is normal to _ash the screen after just accessing this product and communicating with it. It usually ashes twice with the screen’s going to show up.
5. Operations not performed according to the instructions of this product may be made on this product or your equipment The company shall not be held liable for any damage caused
6. When you connect this product to your device, the display end cannot display or appear normally Snow ake dry point, may be the problem of insuficient power supply, please be sure to connect this product The USB cable to your +5V power supply provides enough power to make the product work properly.

Packaging accessories

1. product
2. Instructions

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>