BOWER WA-SL12 12in Ring Light Studio Kit Instruction Manual

BOWER WA-SL12 12in Ring Light Studio Kit

Product Parts Introduction

• Phone Holder with Pivot Mount
• 62” Tripod
• Wireless Remote Shutter
• Rotating Ball Head

Installation

Tripod

1. Open and extend the legs of the studio kit tripod fully on a flat surface.
2. Ensure that the legs are securely extended when adjusting the height of the tripod.
3. To extend the tripod to approximately 62”, turn the knob clockwise and pull the extender to the desired height.
4. Lock in the extension by turning the knob counterclockwise until tight. Avoid forcing or over-tightening the knob.

Ring Light
Attach the ball head into the bottom of the ring light by screwing the ball mount into the light ring light. Ensure a secure attachment without over- tightening.

Phone Holder
Attach the tripod into the bottom of the ball head mount byscrewing it in. Ensure a secure attachment without over-tightening.

User Manual

How to Use (In-line Remote)
Understanding the Controls:

• Brightness Down
• Brightness Up
• ON/OFF
• Lighting Color Switch – Click repeatedly to switch between lighting modes 3 Light Modes + 10 Levels of Brightness

How to Use (Wireless Remote Shutter)

1. Turn on the power button located at the side of the remote. The indicator LED will flash, and the AB Shutter3 will enter pairing mode.
2. Turn on your smartphone’s Bluetooth settings and search for the device named “AB Shutter3”.
3. Select the device “AB Shutter3” from the list, and the pairing process will automatically finish in a few seconds.
   This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Specification

• Lamp beads: 144
• Color temperature: 3000K~4000K~6000K
• Illumination: 220LM
• Power: 15W
• Input voltage: USB-5V
  Please read and follow these instructions.

LIMITED One (1) Year Limited Warranty: S. Bower Inc.TM provides a one- year limited warranty for this product. This warranty grants specific legal rights, and you may have additional rights that vary from state to state. Note that this warranty does not cover products sold outside of the United States.

PRODUCT PARTS INTRODUCTION

INSTALLATION

Tripod

• The legs to the studio kit tripod should be open and extended fully to provide full support on flat surface. Please make sure that the legs are secure when extending the height of tripod.
• The studio kit tripod can then extend to approximately 62” by turning the knob clockwise and pulling the extender to desired height.
• Lock in extension by turning the knob counterclockwise until tight. Do not force knob or over tighten.

Ring Light

• Step 1:

  • Attach the flexible stand mount by screwing mount into light ring light.
  • Do not over twist and force.
  • Mount should feel secure in ring light.

• Step 2:
  Attach the ball head into bottom of ring light by screwing ball mount into light ring light. Do not over twist and force. Ball head attachment should feel secure in ring light.

• Step 3:

  • Attach the tripod into bottom of ball head mount by screwing tripod into ball mount.
  • Do not over twist and force.
  • Tripod should feel secure in ball mount.

Phone Holder
Step 4: Secure your smart phone into holder by opening spring adjusted flaps. Do not force.

HOW TO USE

In-line Remote

3 Light Modes + 10 Levels of Brightness

Wireless Remote Shutter

How to use

1. Turn on the power button (located at the side of remote), indicator LED flashes and “AB Shutter3” will enter into pairing mode.

2. Turn on your smartphone’s Bluetooth settings and search for “AB Shutter3” name.

3. Select the device “AB Shutter3” from the list and pairing will be finished automatically in a few seconds.

   • The Bower® 12’’ Ring Light Kit transforms your smartphone into a professional photo studio. Make videos at night or take great selfie in dark areas.
   • Great for creating live videos with smartphone or computer, perfect for vlogging, live videos, video chats, social media, live streaming, health and beauty and more!

FEATURES

• Dimmable LED ring light: LED light for an adjustable lasting brightness. Choose from three (3) light colors and ten (10) levels of brightness within each mode
• Easy to use control cord to power on/off or switch to the lightning mode you prefer. Ring light makes every photo and video present more professional
• Compatible with most smart phones, phones width should be between 2.3 to 3.6 inches. Phones with large cases might not fit as well
• Making videos at night or taking a great selfie has never been easier especially in dark areas. Great for creating live videos with smartphones, perfect for vlogging, live videos, video chats, social media, live streaming, health and beauty videos and more
• Adjustable tripod stand – Extendable from up to 62”. Lock in desired length as you need, which we allow you to use as a folded table tripod or stand on the floor tripod
• The tripod stand itself can be used as a selfie stick with phone, but it is recommended to be used as a standing tripod
• USB powered – No battery required, works with most devices that support USB port, like a computer, power bank, USB charger, etc.
• Wireless Bluetooth remote shutter included – connects to your phone and allows you to control device hands free

SPECIFICATION

• Lamp beads: 144
• Color temperature: 3000K~4000K~6000K
• Illumination: 220LM
• Power: 15 w
• The input voltage is USB-5v
  Please read and follow these instructions.

Disclaimer

• This manual should be kept for future reference and maintenance purposes only.
• Be sure to review this manual and become familiar with its features before using this product. Please make sure to never change the light bulb while plugged into an outlet or other power source. Do not open or change wiring in anyway. Keep this product away from children.
• Clean this product often with a soft, dry cloth. This product shall ONLY be used with rated voltage and frequency. Do not try and alter power supply or adjust voltage.
• Avoid unplugging the power by pulling the power cord and do not touch the power cord with wet hands. Never attempt to insert any metal objects into the cooling holes of illuminators. Avoid moving the illuminator by pulling the power cable.
• Stop using this product if the unit is damaged, especially the power cord. Do not use in the rain, bath, or near water source. Please be aware that improper use or inappropriate repair can lead to fire or electrocution. Indoors use only.
• Please send back to Bower or contact customer service for issues regarding maintenance or repair. Make sure everything is secure before proceeding. Make sure the product is intact and that there are no missing parts.
• All photos and illustrations are for instruction purposes only

LIMITED One (1) Year Limited Warranty

S. Bower Inc.™ One (1) Year Limited Warranty: This warranty gives you specific legal rights and you may have other rights which vary from state to state.

• The S. Bower Inc.™ Limited Warranty is a voluntary manufacturer’s warranty provided to the consumer. This warranty provides rights separate to rights provided by consumer law, including but not limited to those relating to non-conforming goods. S. Bower Inc.™
• One-Year Limited Warranty benefits are in addition to, and not instead of, rights provided by consumer law and it does not exclude, limit or suspend a buyer’s rights arising from consumer law. Consumers have the right to choose whether to claim service under the S.
• Bower Inc.™ One-Year Limited Warranty or under their consumer law rights. The S. Bower Inc.™ One-Year Limited Warranty terms and conditions shall not apply to consumer law claims, contact your local consumer organization.
• Please note: All claims made under the S. Bower Inc.™ One-Year Limited Warranty will be governed by the terms set out in this warranty document.
• S. Bower Inc.™ warrants to the product owner that this product will be free against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase when used in accordance with S. Bower Inc.™ ’s user manual. Under this warranty, you will be able to send your claims and defective product to S. Bower Inc.™, via freight prepaid, along with proof of purchase, and will be repaired or replaced, based on S. Bower Inc.™ sole discretion. Repair and/or replacement may be made with new or refurbished product components at S. Bower Inc.™ sole discretion. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than S. Bower Inc.™ personnel. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways:
• The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to send the product (prepaid freight) to S.
• Bower Inc.™ corporate offices located at S. Bower Inc. 46-24 28th Street 3rd Floor Long Island City, NY 11101 for repair or replacement at S. Bower Inc.™ ’s option. Proof of purchase is required. Include name, return address, and issues that you are experiencing with S. Bower Inc.™ products. All other guarantees, express or implied, are hereby disclaimed.
• This warranty does not cover products sold outside of the United States.

ABOUT COMPANY

• ©2021 S. Bower, Inc. All rights reserved.
• All brand names and trademarks belong to their respective owners
• S. Bower, Inc. LIC, NY 11101
• www.BowerUSA.com

References

• BowerUSA Consumer Photography Accessories and Electron

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>