BOWER BWRWARGBWAND 20 Inch Wand Light LED Light User Manual
- June 9, 2024
- BOWER
Table of Contents
BOWER BWRWARGBWAND 20 Inch Wand Light LED Light
PRODUCT PARTS INTRODUCTION
HOW TO USE
FEATURES
- Handheld RGB Light
- Dimmable with touch adjust mode
- 9 lighting modes
- 12 levels of brightness+ stepless (long press+/-).
- Built-in 3.7v/2000mah Rechargeable lithium battery
- USB type C charging port, supports full power
- 1/4 inch standard tripod allows the light to be mounted on a tripod
- Remote Control Included RGB
- Includes:
- 1 x RGB light wand, 1 x USB type C charging cable, lx lanyard, 1 x manual.
SPECIFICATIONS
- Built in 3.7v/2000mah lithium battery
- LED beads quantity: 200pcs regular+ 4lpcs RGB 30RGBmodes
- Lasts up to 2H
- RGB colors: 9
- Power: l0W
- 12 levels of brightness+ stepless (long press+/-) Discharge current 900A (maximum)
- Battery over protection voltage: 3.0V
HOW TO USE
Connect the USB plug to a USB source such as a computer USB port or USB wall charger port and a USB-TYPE C port for recharging. When charging, the red light is always on. When fully charged, the green light is always on.
-
When the lamp is off, press the on/off key briefly, turn on the light, and then press the on/off key once to turn off the lamp. The lamp memory function of this product is related. The state of the last time the lamp is turned on every time the lamp is turned on
-
Press the M key for a short time, and the light will switch between modes.
In the light still mode, press the+ / – key to adjust the brightness, and press the+/ – key in the flashlight mode to adjust the flash speed, split speed, medium, slow, and 3 levels of adjustment -
Press the S key briefly, light the switch to RGB mode, press S key briefly, the light mode is switched. When light is in static mode, press+ I• key to adjust brightness. In dynamic mode, press+/ – key to adjust dynamic speed.
LIMITED One (I) Year Limited Warranty
S. Bower Inc.™ One (1) Year Limited Warranty: This warranty gives you
specific legal rights and you may have other rights which vary from state to
state. The S. Bower Inc.™ Limited Warranty is a voluntary manufacturer”
warranty provided to the consumer. This warranty provides rights separate from
rights provided by consumer law, including but not limited to those relating
to non-conforming goods. S. Bower Inc.,. One-Yeor Limited Warranty benefits
are in addition to. and not instead of, rights provided by consumer law and it
does not exclude, limit or suspend a buyer’s rights arising from consumer law.
Consumers have the right to choose whether to claim service under the S Bawer
Inc.•” One-Year Limited Warranty or under their consumer law rights. The S.
Bower Inc.’s” One-Year Limited Warranty terms and conditions shall not apply
to consumer law claims, contact your local consumer organization.
Please note: All claims mode under the S. Bower Inc.•” One-Year Limited
Warranty will be governed by the terms set out in this warranty document S.
Bower Inc.” warrants to the product owner that this product will be free
against defects in materials and workmanship for a period of ONE (1) YEAR from
the date of original retail purchase when used in accordance with S. Bower
Inc•” ‘s user manual. Under this warranty. you will be able to send your
claims and defective product to S. Bower Inc.'”. via freight prepaid, along
with proof of purchase, and will be repaired or replaced, based on S. Bower
Inc.™’s sole discretion. Repair and/or replacement may be made with new or
refurbished product components at S. Bower Inc.™’s sole discretion. This
limited warranty does not cover failures due to abuse, accidental damage, or
when repairs have been made or attempted by anyone other than S. Bower Inc.’s”
personnel. A defective product meeting the warranty conditions set forth
herein will be replaced or repaired at no charge in either of two ways: The
first, which will result in exchanges only, is to return the product to the
retailer from whom it was purchased (provided tha1 the store is a
participating retailer). Returns should be made within 1he time period of the
retailer’s policy for exchanges. Proof of purchase may be required. Please
check with the retailer for its specific return policy regarding time limits
for returns or exchanges. The second option is to send the product (prepaid
freight) to S. Bower Inc.’s” corporate offices located at S. Bower Inc. 46-24
28th Street 3rd Floor Long Island City NY 11101 for repair or replacement at
S. Bower Inc.”‘ ‘s option. Proof of purchase is required. Include your name,
return address, and issues that you are experiencing with S. Bower Inc.’s”
products. All other guarantees. express or implied. are hereby disclaimed
This warranty does not cover products sold outside of the United States.
Disclaimer
©2021 S. Bower, Inc. All rights reserved.
All brand names and trademarks belong to their respective owners
S. Bower, Inc. LIC, NY 11101 www.BowerUSA.com