BOWER BWRWA50LED 50 LED Smartphone Video Light User Manual
- June 9, 2024
- BOWER
Table of Contents
BOWER BWRWA50LED 50 LED Smartphone Video Light
PRODUCT INTRODUCTION PARTS
- LED Video Light
- Soft White diffuser
- Orange diffuser
- Blue diffuser
- Cellphone holder
- Cold shoe mount
- USB charging cable
- Working indicator
- Push-button
- Bulit-in 50pcs of 2835 Iamps
- MICRO input port
- 1/4″ Screw
INSTALLATION
- Screw the shoe mount adapter to the bottom of the light. Be sure it is secure.
- Gently slide the shoe mount adapter (with the light attached) into the mount on the top of the phone holder.
- Expand Phone Mount and gently Insert your phone so it is flush against the back support of the phone holder
- Install Diffusers to achieve the desired lighting.
Features
High-power 50-LED smartphone light
Provides powerful light for increased luminance
Super-thin (0.4″), lightweight and pocket-size design
Cooling, warming and diffusing plates for adjustable color temperature
Perfect for creating professional videos, as well as, still photography
OPERATION
Turn On/Off
Long press the ‘On/Off button for about 2 seconds to turn LED light on or off
Adjusting the light temperature
Important: Please only attach diffusers on to led light in “off” mode.
Adjust the light temperature with detachable diffusers (Soft White, Orange,
Blue)
Attach the diffusers to the front of the LED light by placing them on to the
front of the light and click it in place.
Do not force diffuser to front of LED light. It should click on easy
Colors achieve the below effects:
- Achieve softer light with the Soft white diffuser
- Increase the warming effect with the Orange diffuser
- Increase the cooling effect with the Blue diffuser
CHARGING:
Connect the micro USB charging cable to the LED body. Charge via USB port on
wall charger (not included) or portable battery (not included)
SPECIFICATION
Charging time Approx. 120 minutes
Built-in battery 3.7V 500mAh
Max power 3.5W
Luminous flux brightness) 350Im (4.2V) (Battery is 4.2V, third level
Color temperature 650OK (+500K)
Color temperature Ra 80
Lamp qty 50
Dimming range Three-level brightness
Illumination angle 120
Battery life Approx. 40 minutes with continuously
working in third rating
Ambient temperature -10-35, -10-60
Working temperature is -10°C-35°C
Storage temperature is -10°C-60°C
Input port Micro Micro input port
Charing current 5Vo.5A
Fixed interface 1/4 Screw
Weight About 30.8g
Size 73x 42 x 10.5mm
LIMITED One (1) Year Limited Warranty
S. Bower Inc.TM One (1) Year Limited Warranty: This warranty gives you
specific legal rights and you may have other rights which vary from state to
state.
The S. Bower Inc.TM Limited Warranty is a voluntary manufacturer’s warranty
provided to the consumer. This warranty provides rights separate to rights
provided by consumer law,including but not limited to those relating to non-
conforming goods. S. Bower lncTM One-Year Limited Warranty benefits are in
addition to, and not instead of, rights provided by consumer law and it does
not exclude, limit or suspend a buyer’s rights arising from consumer law.
Consumers have the right to choose whether to claim service under the S. Bower
Inc.TM One-Year Limited Warranty or under their consumer law rights. The S.
Bower Inc.TM One-Year Limited Warranty terms and conditions shall not apply to
consumer law claims, contact your local consumer organization.
Please note: All claims made under the S. Bower Inc.TM One-Year Limited Warranty will be governed by the terms set out in this warranty document. S. Bower Inc.TM warrants to the product owner that this product will be free against defects in materials and workmanship for a period of ONE () YEAR from the date of original retail purchase when used in accordance with S. Bower Inc.TM ‘s user manual. Under this warranty, you will be able to send your claims and defective product to S. Bower Inc.TM, via freight prepaid, along with proof of purchase, and will be repaired or replaced, based on S.Bower Inc.M sole discretion. Repair and/or replacement may be made with new or refurbished product components at S. Bower Inc. TM sole discretion. This limited warranty does not cover failures due to abuse, accidental damage or when repairs have been made or attempted by anyone other than S. Bower Inc.TM personnel. A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either oftwo ways: The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges. The second option is to send the product (prepaid freight) to S. Bower Inc.TM corporate offices located at S. Bower Inc. 46-24 28th Street 3rd Floor Long lsland City, NY 11101 for repair or replacement at S. Bower Inc.TM ‘s option. Proof of purchase is required. Include name, return address, and issues that you are experiencing with S. Bower Inc.TM products. All other guarantees, express or implied, are hereby disclaimed.
This warranty does not apply to products sold in countries sold out of the United States.
C2020 S. Bower, Inc. All rights reserved.
All brand names and trademarks belong to their respective owners
S. Bower, Inc. LIC, NY 11101 www.BowerUSA.com