Doraimy Lighting 3370D5 5 Light Linear Chandelier Lighting Fixture Instructions

Doraimy Lighting 3370D5 5 Light Linear Chandelier Lighting Fixture

Instructions

Assembly Instructions

WARNING:

• It is strongly suggested that all hardwired fixturesbe installed by a professional electrician..
• To reduce the risk of fire, electrical shocks orpersonal injuries, always turn off the light fixtureand let it cool prior to replacing the light bulbs.
• Do not touch the bulb when fixture is turned on;do not look directly at a lit bulb.
•  Keep flammable materials away from a lit bulb.
•  Shut off all the main electrical supply from thefuse box/circuit breaker
• Use E12 TYPEB CFL 6W, LED 4W bulb types and wattages. Do not exceed recommended wattages

SKU:# 3370D5

(Not included the bulb)
Parts included:

Hardware enclosed:

Dear customer,

Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly.
We’ll provide the best service for you. Hope you enjoy the shopping experience!
Any questions please free to contact us:
Email: [email protected]

Step 1

Gently pull the wire in the ceiling junction box and let the wire hang. 2. Attach Mounting Plate (D) to the junction box. 3. Secure the Mounting Plate (D) by tightening 2 Junction Box Screw (C) with a screwdriver.

Step 2:

Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire, with the Wire Connector(A)

Step3:

Place Canopy(E) on the lip of Mounting Plate(D) and secure with Canopy Nuts(F).

Step 4

: Install bulbs(not included) into Socket(T)

Step 1

1.Remove all parts and hard ware from box along with all plastic protective packaging 2.Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate (D).

Step 2:

Place Elbow Pipe(S) onto Fixture(P), then secure Hexnuts(N), Spring Washer(O) into the Iip of Elbow Pipe(S). and secure Hexnuts(N) with Allen Wrench(Q).

Step3:

1.0pen the Janitors from Wiring Terminal(R) 2lInsert the white/black wire into the hole of Wiring Terminal(R). then close the Janitors. 3 Place Metal Cap(L) on Lip(K) and secure with Finial(M).

Step 4:

Secure Metal Tube(l), Short Tube(H), Long Tube(G) into Lip(J) in order, and secure Canopy(E) into Long Tube(G)

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>