ACCSOON WIT01 5G Wireless Video Transmitter User Manual
- June 13, 2024
- ACCSOON
Table of Contents
ACCSOON WIT01 5G Wireless Video Transmitter
INTRODUCTION
CineEye is a revolutionary product, different from traditional video
transmitters, the CineEye use mobile devices as receiver and monitor. CineEye
can accept 1080p@60fps video input and transmit the video to mobile devices
through 5G WiFi, it offers real-time monitoring on up to 3 mobile devices at
very low latency and a transmission range up to 100 meters in open areas. As a
transmission solution targeted for mobile devices, CineEye supports both
Android & iOS platforms with a state-of-the-art monitoring app that can turn
your mobile devices into professional monitors, it offers many assisting
features often seen on high-end monitors.
CineEye Diagram
- Antenna
- Power Button
- Reset Button
- HDMI Input
- Power LED
- Mounting Hole
- Status LED
- Charging LED
- USB Type-C Charging Port
Charging
- While charging, the green lee will blinking. When the battery is fully charged the green led will turn into solid.
- The CineEye support charging when in use.
- Please use 5V/2A charger or power bank for charging.
- For saftey, charging will stop if the battery temperature higher than 45°C.
Power LED
Connection
Unfold the antenna
Connect HDMI
Connect the HDMI output from your video source to the HDMI input connector.
Status LED
Power On/Off and Reset
Power On
Press the power button for 1 second.
Power Off
- Press the power button for 1 second.
- No HDMI video stream input more than 10 minutes.
- Out of battery.
Reset
Turn on the CineEye, then use a tiny tool to press the reset button for 3
second to perform complete factory reset.
APP
- Launch the CineEye APP. Click “WiFil Setting” to open the WLAN page of the mobile devices, search and connect the CineEye WiFi (Name Format: CineEye_XXXX.initial password: 12345678)
- Back to the Cine Eye page, click “Into the Main”.
- Click to start monitoring.
- Some models of smart phones may need to turn off Mobile Data connection, or the CineEye APP cannot receive and display the image.
Warranty
Warranty Period
- 15-day warranty from the received date If there any guilty problem happening to our products,we will be responsible for giving free maintain or replace for free.
- The warranty time is one year. Within warranty period, if under the usage of instruction sheet,any product problems, we will offer the repair service for free.
Warranty Service Won’t be given under the following circumstance
- Unauthorized maintenance, misusage collision,liquid infiltration, modification.
- Incorrect use of the product, tearing up or altering lable and flase proof mark.
- It has already exceeded the period of validaity of 3-warranty.
- Damage due to fire, flood disaster, light storke and the like.
Process to get warranty service
Customer shall contact with the local dealer to solve the quality. If there is
none, please contact with our company through
E-mail([email protected]) or our
website(www.accsoon.com). You will get detailed
information from them. We reserve the ultimate right to review the damaged
products.
- Product Name: 5G Wireless Video Transmitter
- Product Model: WIT01
- Serial number:
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.