JACFIT JMate Strap User Manual
- June 4, 2024
- Jacfit
Table of Contents
JACFIT JMate Strap
WHAT’S IN THE BOX
Charging
- Attach the small end of the USB cable to the magnetic charging port on your device.
- Plug the large end of the USB cable into a USB charging port.
LED indicator will light up “Red” until charging is completed. Note: When indicator flashes “Green” means battery is low. Please charge.
Installation
- Align JMate and strap with Jacfit logo.
- Connect them with hook magic tape.
JMate Boxing Mode
- Knock JMate and check the indicator light. Wear it on your “Right wrist” and the indicator light side facing you.
- Turn on Location and Bluetooth on mobile setting. Allow Jacfit app to use them while first download. ①
- Open the Jacfit app and enter “Boxing” mode. ②
- Knock JMate to wake up. When the LED indicator lights up “Green”, you will see the sensor ID appears on the Bluetooth setting.
- Click the ID and press “Connect” to Boxing mode. If connected, the indicator light will become “Blue”.
JMate Step Coin Mode
-
During “Step Coin Mode”, no need to connect to the app.
Wear JMate on any wrist, you are ready to go. -
When connected, JMate will upload your data and convert it to Jcoins once you click “Exchange” ③ .
Casting Calibration
- If you cast the Jacfit app to TV, please go to the app setting and choose “Casting Calibration”.
- Watch casting screen and cross when boxing icon down to the blue area.
- Adjust the time to make sure your score achieves at least 12.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>