SOMOGYI ELEKTRONIC PNL 7 LED Motion Sensor Lamp Instruction Manual

SOMOGYI ELEKTRONIC PNL 7 LED Motion Sensor Lamp

Product information

• Product Name: PNL 7 Motion Sensor Lamp
• Manufacturer: SC SOMOGYI ELEKTRONIC SRL
• Model Number: PNL 7
• Type: Motion sensor lamp
• Motion Sensor Type: Infrared (PIR) sensor
• Detection Range: Not specified
• Detection Angle, Horizontal: Not specified
• Detection Angle, Vertical: Not specified
• Operating Time After Last Movement: Not specified
• Operating Ambient Brightness: Not specified
• LEDs: Yes
• Operation Temperature: Not specified
• Batteries: 4 x AAA (included)
• Size/Weight: Not specified

Product Usage Instructions

1. Read the instruction manual carefully before use and retain it for later reference.
2. Cleaning:
   • Use a soft, dry cleaning cloth to clean the product.
   • For heavy dirt, use a cloth dampened with water.
   • Avoid using aggressive cleaning agents.
   • The product requires no maintenance.
3. Keep the product out of the reach of children as it is not a toy.
4. Operation:
   • The lamp’s infrared (PIR) sensor switches it on when motion is detected.
   • It automatically switches off after a delay when the motion is completed.
   • In a bright environment, it does not switch on for motion.
   • It is ideal for use next to stairs, on pathways, in children’s rooms, bedrooms, and bathrooms.
   • It can also be used in a wardrobe or kitchen cupboard.
   • The slide switch has three functions:
   • OFF: Turns the lamp off.
   • AUTO: Activates motion detection mode.
   • HE: Keeps the lamp continuously lit.
5. Installation:
   • The lamp can be placed in different positions on the wall, furniture, refrigerator, or elsewhere.
   • It can be mounted directly on a magnetic surface using the built-in magnet on the backplate.
   • If the surface is non-magnetic, stick the provided metal sheet onto it (after removing any anti-scratch film) and place the lamp on it.

STRUCTURE

1. LED light
2. sensor
3. off-auto-on
4. magnet
5. batteries
6. batt. cover

IMPORTANT SAFETY INSTRUCTIONS

READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!

WARNINGS

• Before use of the product, please read this instruction manual and keep it for future reference. The original document was prepared in Hungarian language.
• This appliance can be used by children aged 8 years or above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are supervised or have been given instructions concerning the use of the appliance and understand the hazards involved.
• Children may not play with the appliance. Children may perform the cleaning or user maintenance of the appliance subject to supervision.
• After removal of the packaging, inspect the product for possible damage during shipment.
• Keep the packaging away from children if it contains plastic bags or other potentially hazardous items.
• Never look directly into the LED light!
• Protect the device from dust, humidity, liquids, moisture, frost and shocks, as well as from direct heat and sunlight.
• Only for use under dry, indoor conditions.
• The product contains magnets; do not place objects sensitive to magnetic fields (such as credit cards, cassettes, compasses, etc.) in their proximity.
• This product is for household use, it is not intended for industrial-commercial applications.
• After the useful life of the product, it is to be considered as hazardous waste. Dispose of the product according to local legislation.
• Due to continuous improvements, technical data, operation and design are subject to change without notice. The most recent instructions manual is available for download from the www.somogyi.hu website.
• However we regret such inconvenience, we do not take any responsibility for possible printing errors.

CLEANING

• Use a soft, dry cleaning cloth. Remove heavy dirt with a cloth dampened with water. Do not use aggressive cleaning agents! It requires no maintenance.
• The product is not a toy. Keep out of reach of children!

FEATURES

• automatically switches on when it detects motion
• economical: does not switch on in bright environments
• with PIR motion sensor and light sensor
• automatic or continuous lighting modes
• cool white; illuminates details well
• practical as a handheld lamp at home
• ideal in furniture, garage, passageways
• mounted with magnets or self-adhesive glue
• accessories: built-in magnet, self-adhesive metal sheet
• power supply: 4xAAA (1.5V) batteries, not included

OPERATION

• Its infrared (PIR) sensor switches the lamp on when motion is detected, and it switches off after a delay when the motion is completed.
• In a bright environment, it does not switch on for motion. Ideal for use next to stairs, on pathways, in children’s rooms, bedrooms and bathrooms.
• A useful aid in a wardrobe or kitchen cupboard.
• Slide switch functions:
  • OFF: off
  • AUTO: motion detection mode
  • ON: continuously lit.

COMMISSIONING

Remove the battery compartment cover. Insert four AAA (1.5V) long-life alkaline batteries, according to the polarity specified. Replace the battery cover, and the lamp is ready to use. If it later stops working properly, replace the batteries immediately. Remove the batteries if you are not going to use them for a long period of time. If a battery is stuck, it may be necessary to gently tap the casing.

ATTENTION:  INCORRECT BATTERY REPLACEMENT CAN CAUSE EXPLOSION HAZARD. CAN ONLY BE REPLACED WITH AN IDENTICAL MODEL OR A SUITABLE REPLACEMENT. DO NOT EXPOSE THE BATTERY TO DIRECT HEAT OR SUN RADIATION AND DO NOT THROW IT INTO FIRE! IF ANY FLUIDS HAVE LEAKED FROM THE BATTERY, CLEAN THE BATTERY COMPARTMENT WITH A DRY CLOTH WEARING PROTECTIVE GLOVES.

KEEP BATTERIES AWAY FROM THE REACH OF CHILDREN. IT IS FORBIDDEN TO OPEN, BURN, SHORT CIRCUIT AND CHARGE THE BATTERY! EXPLOSION HAZARD! BATTERY REPLACEMENT MUST BE PERFORMED BY AN ADULT. DO NOT MIX BATTERIES OF DIFFERENT MAKES AND/OR CHARGING LEVELS. DO NOT USE RECHARGEABLE BATTERIES INSTEAD OF BATTERIES! DO NOT WELD OR SOLDER DIRECTLY TO THE BATTERY! STORE UNUSED BATTERIES IN THEIR ORIGINAL PACKAGING AND AVOID CONTACT WITH METAL OBJECTS!

INSTALLATION

• The lamp can be placed in different positions on the wall, furniture, refrigerator or elsewhere.
• You can mount it directly on a magnetic surface using the magnet built into the backplate.
• You can stick the metal sheet (remove the anti-scratch film if it has been applied) onto a non-magnetic surface and place the lamp on it.

USE

The lamp switches on when it detects motion in low-light environments. For maximum sensitivity, position it in a way that the direction of movement is parallel to the front of the device. It will switch off after about 20 seconds following the end of the motion. For automatic operation, the slide switch must be set to AUTO. If you need continuous lighting, select the ON mode, if you want to switch it off, select the OFF position. Do not push the PIR sensor, it is not a push button! If the temperature difference between the moving person and the ambient temperature is small (e.g. in hot summer), the range can be significantly reduced. Incorrect switch on can be caused by wind, warm air flow or nearby hot appliances.

Specifications

DISPOSAL

Waste equipment must be collected and disposed of separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

DISPOSING OF ALKALINE AND RECHARGEABLE BATTERIES

Batteries, whether alkaline or rechargeable, must not be handled together with regular household waste. It is the legal obligation of the product’s user to dispose of batteries at a nearby collection center or at a retail shop. This ensures that the batteries are ultimately neutralized in an environment- friendly way.

Contacts

Producer

• SOMOGYI ELEKTRONIC®
• H – 9027 Győr, Gesztenyefa út 3.
• www.somogyi.hu

Distribútor: SOMOGYI ELEKTRONIC SLOVENSKO s. r. o.

• Ul. gen. Klapku 77, 945 01 Komárno, SK
• Tel.: +421/0/35 7902400
• www.somogyi.sk

Distributor

• S.C. SOMOGYI ELECTRONICS S.R.L.
• J12/2014/13.06.2006 C.U.I.: RO 18761195
• Cluj-Napoca, Cluj County, Romania, Str. Prof. Dr. Gheorghe Marinescu, no. 2, Postal code: 400337
• Tel.: +40 264 406 488,
• Fax: +40 264 406 489
• www.somogyi.ro

Uvoznik za SRB: ELEMENTA d.o.o.

• Jovana Mikića 56, 24000 Subotica, Srbija
• Tel: +381(0)24 686 270
• www.elementa.rs

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>