audiophony STONE60 Outdoor Speaker User Manual
- June 13, 2024
- auDiopHony
Table of Contents
STONE60
STONE60 Outdoor Speaker
Granite rock style outdoor speaker for 100V or 8 Ohms amplifiers.
| Power outputs | 30 – 60 W / 100V 60W/8Ohms |
|---|---|
| Voltage | 100 V / 8 Ohms |
| Components | 8″ + 1″ |
| Sensitivity (1W/lm) | 91 dB, +/-3dB |
| Frequency response | 90-13 000 Hz |
| Material | Fiberglass enclosure granit gray peint finishing |
| Holding | Ground fixing plate + safety ring |
| Connectors | Waterproof cable on gland IP66 |
| Dimensions | 440 x 320 x 290 mm |
| Weight | 8,5 Kg |
Wiring
Connect
the two wires corresponding to the desired power on your amplifier output.
Dangerous voltage
Speakers must be connected last to the amplifier .
Turn the amplifier on when the installation is over and has been checked
thoroughly.
Caution: The sum of all
connected speakers must not exceed the maximum power of your amplifier.
Installation
Curves
Dimensions
Because AUDIOPHONY® takes the utmost care in its products to make sure you
only get the best possible quality, our products are subjects to modifications
without prior notice. That is why technical specifications and the products
physical configuration might differ from the illustrations.
Make sure you get the latest news and updates about the AUDIOPHONY® products
on www.audiophony.com
AUDIOPHONY® is a trademark of HITMUSIC S.A. – Zone Cahors sud – 46230 FONTANES
– FRANCE