cecotec Conga Rockstar Nonstop Wet Bagless Cordless Broom Vacuum Cleaner Instruction Manual
- June 13, 2024
- cecotec
Table of Contents
- PARTS AND COMPONENTS
- BEFORE USE
- PRODUCT ASSEMBLY
- OPERATION
- WATERTANK ACCESSORY
- CLEANING AND MAINTENANCE
- TROUBLESHOOTING
- TECHNICAL SPECIFICATIONS
- DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
- TECHNICAL SUPPORT AND WARRANTY
- COPYRIGHT
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
cecotec Conga Rockstar Nonstop Wet Bagless Cordless Broom Vacuum Cleaner Instruction Manual
PARTS AND COMPONENTS
Fig. 1
- Battery release button
- On/Off button
- Filter access
- Vacuuming-tube release button
- Articulated vacuuming tube
- Vacuuming-brush-head release button
- Jalisco brush
- Dust tank
- Dirt-tank opening button and filter access
- Battery indicator
- Power selector
- Power adapter
- Accessory for corners
- 2 in 1 accessory
- Wall bracket
- Accessory for furniture
- Water tank
- Flexible tube
NOTE:
The graphics in this manual are schematic representations and may not exactly
match the product.
BEFORE USE
- This upright vacuum cleaner includes a package designed to protect it during transport. Take the product out of the box and remove all packaging materials. Keep the original box and other elements in a safe place, as this will help you prevent product damage when transporting it in the future. In case the original packaging is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If any of them are missing or not in good condition, please contact Cecotec’s official Technical Support Service immediately.
- Fully charge the device before first use.
- The normal charge time is 5 hours approx. When the battery is fully charged, unplug it.
Box contents
- Conga Rockstar NonStop vacuum cleaner
- 2 in 1 accessory
- Accessory for furniture
- Corner accessories
- Flexible tube
- Jalisco brush
- Articulated vacuuming tube
- Wall bracket
- Power adapter
- Instruction manual
PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
- To install the vacuuming brush head into the vacuuming tube, align both making sure the tab on the brush head matches the guides on the tube, and introduce one into the other until they are firmly fixed.
- To disassemble them, press the Vacuuming-brush-head release button, and pull from the vacuuming tube while you hold the vacuuming brush head.
NOTE:
When assembling these 2 parts, make sure the handle and the brush are facing
the same direction.
Vacuuming tube, vacuuming brush head, and main body assembly. Fig. 2
To complete the vacuum cleaner’s installation, once the vacuuming brush head
is mounted on the vacuuming tube, hold the tube vertically and insert it into
the main body.
Assembling the battery. Fig. 3
- Introduce the battery in the slot located in the main body following the guides. Once it is introduced, it will click into place. Once inserted, check that it is secured in position.
- To disassemble the battery, press the release button and remove the battery.
NOTE:
Remove the battery and store it in a safe, dry place if the device is not
going to be used in a long period of time.
OPERATION
You can use this vacuum cleaner in two different manners:
- Handheld vacuum cleaner, attaching the accessories directly to the main body.
- Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
Using the vacuum cleaner
- Press the power button to turn the vacuum cleaner on or off.
- Press the speed dial repeatedly to select the device’s operating speed: Eco and Turbo. The device will turn on in Eco mode by default.
Attachments
This device includes different accessories that allow cleaning different types of surfaces, objects, and dirt. Some of them are suitable for the upright vacuum cleaner, and others are preferably used with the handheld one.
Jalisco brush
Install this accessory on the suction base and the latter to the upright
vacuum cleaner. This brush is especially designed for cleaning hard floors,
but can be used to efficiently clean soft floors too.
2 in 1 accessory
This accessory is preferably used with the handheld vacuum cleaner and allows
cleaning furniture without damaging it.
Accessory for corners
This accessory is preferably used with the handheld vacuum cleaner to reach
less accessible dirt in corners.
Articulated vacuuming tube
Use the articulated tube to reach and vacuum dirt from the most inaccessible
zones. Press the button to bend the tube.
Installing the wall bracket Fig. 4
- Place the bracket on the wall and mark 3 spots to be drilled to fix the bracket. You must take into account the height of the installation; it is important that vacuuming brush head rests on the floor to prevent the wall bracket from supporting all the vacuum cleaner’s weight.
- Drill the 3 holes (previously marked) and insert the pegs and screws.
- Make sure the bracket is securely fixed to the wall and place the vacuum cleaner on it, inserting its charging terminals into the bracket’s.
- Once the wall bracket is installed, connect the power adapter to the charging port, and then you can charge the vacuum cleaner by simply sliding it up and down the wall bracket.
Charge and display
- The battery must be charged with the wall bracket while it is connected to the main body. Connect one of the ends of the power adapter to the power supply and the other to the charging base.
- During charge, the battery indicator will flash. When charging is complete, the battery indicator will remain steady.
- You can also charge the battery without using the wall bracket. You can charge the battery when the battery is installed or not in the vacuum cleaner. Connect the adapter and connect the other end to the battery, paying attention to the direction. Once properly connected, the battery indicator will flash and change to steady when charging is complete.
WATERTANK ACCESSORY
- Do not use cleaning agents. Use clean and room temperature water only. Do not use the vacuum cleaner to vacuum water.
- When the vacuum cleaner is not going to be used for a long period of time, remove the water tank and empty the remaining water. Do not expose it to direct sunlight or to damp environments.
Mop installation
- Place the mop cloth on the ground with the Velcro facing upwards.
- Align the mop cloth with the Velcro strips on the water tank and attach it without covering the wheels.
Replacing the mop
- Remove the water tank from the vacuum cleaner.
- Replace the mop and refill the water tank.
- Install the water tank again, insert the tank in the lower part of the vacuuming brush head, and press until it is fixed.
Water emission
- When using this product for the first time, make sure the water tank lid is not fully open.
- When the product is not in use, check that the cap is closed, as the product may continue to let out water if the water tank is full.
CLEANING AND MAINTENANCE
- Always turn off and unplug the vacuum cleaner before cleaning or maintenance.
- Use a soft, slightly dampened cloth to clean the device’s surface.
- Never immerse the device in water or other liquids. Do not allow liquids to enter the device.
- Do not use abrasive cleaners or scouring pads to clean the product.
- Do not leave the vacuum cleaner in a place with direct sunlight.
- Do not leave the vacuum cleaner in a wet place after cleaning it.
- After the brush has been used for a long time, bristles might start to tangle with hair and other particles. Clean it for it to operate correctly again.
Filters and tank cleaning
- To prevent the appliance from overheating and losing suction power, it is suggested to clean the filters frequently. To make the most of the suction power, it is suggested to clean the filter after every use.
- The filters shelf life will depend on the accumulated use and the type of particles which are frequently vacuumed. It is recommended to replace the filters every 6 months.
To remove the main filter:
- Press the dirt-tank and filter access release buttons, turn clockwise to remove the filter system.
- Once the filtering system is out, turn the metallic handle anticlockwise and you will be able to take the high-efficiency filters out.
To remove the upper filter:
- Turn the top cover counterclockwise.
- Remove the fabric filter.
- Vacuum and shake the filters to remove every particle and dust remain that may block them and difficult the correct air circulation. Remember not to use the vacuum cleaner without the filters properly assembled.
- Filters cannot be washed inside a washing machine nor dried with a hair dryer.
- Do not brush the high-efficiency filter
To empty the dust tank:
- Press the dirt tank’s release button.
- Once the cover is open, it can be emptied.
Cleaning the Jalisco brush. Fig. 5
- Move the rotary-brush release button with the finger toward the arrow of Figure 5 and remove the cover on the same side of the brush.
- Remove one brush’s ends as shown in Figure 5.
- It is important to clear and clean all the residues left in the brush’s rotary axis.
- If you decide to wash the brush, you must air dry all the pieces. Assemble the pieces back to use the brush again.
How to remove the battery
Press the battery release button and remove the battery as shown in figure 3. Store the battery in a plastic bag and leave it in a dry place.
Vacuum cleaner storage
If the robot is not going to be used for a long time, remove the battery from
the product and store it in a dry and safe place.
TROUBLESHOOTING
TECHNICAL SPECIFICATIONS
Product reference: 05861
Product: Conga Rockstar NonStop Wet
Motor rated power: 200 W
Brush rated power: 15 W
Charger output: 26.4 V 0.5 A
Battery data:
22.2 V 2200 mAh 48.84 Wh
Reference: RSH09-6S1
Input: 26.5 V, 0.5 A
Type: 6INR19/66
Technical specifications may change without prior notification to improve
product quality.
Made in China | Designed in Spain
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the product and/or battery must be disposed of separately from household waste. When this product reaches the end of its shelf life, you should dispose of the cells/batteries/accumulators and take them to a collection point designated by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity
that exists at the time of delivery of the product under the terms,
conditions, and deadlines established by the applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt,
do not hesitate
to contact Cecotec’s official Technical Support Service at +34 963 210 728.
COPYRIGHT
The intellectual property rights over the texts in this manual belong to CECOTEC INNOVACIONES, S.L. All rights reserved. The contents of this publication may not, in whole or in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means (electronic, mechanical, photocopying, recording or similar) without the prior authorization of CECOTEC INNOVACIONES, S.L.
Fig – 1
Fig – 2
Fig – 3
Fig – 4
Fig – 5
Cecotec Innovaciones S. L.
C/de la Pinadeta s/n, 46930
Quart de Poblet, Valencia, Spain
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>