RAZER RZ01-0487 Gaming Mouse User Manual
- June 13, 2024
- Razer
Table of Contents
RAZER RZ01-0487 Gaming Mouse
Razer Gaming Mouse Model No: RZ01-0487
Product Information
- A. Left mouse button
- B. Right mouse button
- C. Scroll wheel
- D. DPI cycle button*
- E. Razer Hypershift trigger
- F. Mouse button 5
- G. Mouse button 4
- H. Wireless USB dongle
- I. PTFE mouse feet
- J. Optical sensor
- K. Slider switch (Bluetooth mode, Power off mode, Razer HyperSpeed Wireless (2.4 GHz) mode)
- The DPI stages are 400, 800, 1600 (default), 3200, and 6400,and they can be customized using Razer Synapse.
- 1 x AA battery (non-rechargeable)
Product Usage Instructions
- Insert a non-rechargeable AA battery into the mouse.
- Connect the mouse:
- Via Razer HyperSpeed Wireless (2.4 GHz) mode:
- Plug the USB dongle into a USB Type A port on your device.
- Turn on the mouse using the slider switch in HyperSpeed Wireless mode (solid green light indicates connection).
- Via Bluetooth mode:
- Ensure your device’s Bluetooth is turned on.
- Press and hold the slider switch for 3 seconds to enter Bluetooth mode.
- Pair the mouse with your device by following the on-screen instructions.
- Razer Hypershift Trigger:
- When held down, the Razer HyperShift trigger allows you to change the mouse’s sensitivity or use the Razer Hypershiftfunctions available on the mouse.
- Primary functions: Scroll click, Scroll up, Scroll left, Scroll down, Scroll right, DPI cycle button
- Razer Hypershift functions: Print screen, Mute or unmute audio, Mouse button 4, Mouse button 5, Minimize all windows
- You can customize the mouse’s DPI and reconfigure buttons using Razer Synapse. Install Razer Synapse from razer.com/synapse or when prompted.
- For safety guidelines and comfort recommendations, refer to the product manual or visit support.razer.com
WHAT’S INSIDE
Razer RZ01-0487
- A. Left mouse button
- B. Right mouse button
- C. Scroll wheel
- D. DPI cycle button*
- E. Razer Hypershift trigger
- F. Mouse button 5
- G. Mouse button 4
- H. Wireless USB dongle
- I. PTFE mouse feet
- J. Optical sensor
- K. Slider switch
- Bluetooth mode
- Power off mode
- Razer™ HyperSpeed Wireless (2.4 GHz) mode
*The DPI stages are 400, 800, 1600 (default), 3200, and 6400, and they can be customized using Razer Synapse.
- 1 x AA battery
- Important Product Information Guide
WHAT’S NEEDED
LET’S GET YOU COVERED
Register your product and score exclusive benefits
razerid.razer.com/warranty
SETTING UP YOUR RAZER RZ01-0487
INSERTING A BATTERY
Caution: The included AA battery is non-rechargeable. Dispose of batteries in accordance with your local environmental laws. For your safety, use only lithium or alkaline batteries.
CONNECTING YOUR MOUSE
VIA RAZER™ HYPERSPEED WIRELESS (2.4 GHz) MODE
VIA BLUETOOTH MODE
Once paired, your Razer RZ01-0487 will automatically reconnect to your device whenever in Bluetooth mode and within range. Keep your devices close to each other for a faster and more stable connection.
RAZER HYPERSHIFT TRIGGER
When held down, the Razer HyperShift trigger temporarily allows you to
change the mouse’s sensitivity or use the Razer Hypershift functions available
on the mouse.
| Primary functions | Razer Hypershift functions |
|---|---|
| Scroll click | Print screen |
| Scroll up | Scroll left |
| Scroll down | Scroll right |
| DPI cycle button | Mute or unmute audio |
| Mouse button 4 | Minimize all windows |
Mouse button 5
You can change your mouse’s DPI to match your playstyle or re-configure the buttons and functions of your mouse using Razer Synapse. Install Razer Synapse when prompted, or download the installer from razer.com/synapse
Find out more about your dual-mode wireless gaming mouse at support.razer.com
SAFETY AND MAINTENANCE
SAFETY GUIDELINES
To achieve maximum safety while using your Razer RZ01-0487, we suggest that
you adopt the following guidelines:
Should you have trouble operating the device properly and troubleshooting does
not work, unplug the device and contact the Razer hotline or go to
support.razer.com for support.
Do not take apart the device, and do not attempt to operate it under abnormal
current loads. Doing so will void your warranty.
Keep the device away from liquid, humidity, or moisture. Operate the device
only within the specific temperature range of 0°C (32°F) to 40°C (104°F).
Should the temperature exceed this range, unplug and/or switch off the device
to stabilize the temperature to an optimal level.
COMFORT
Research has shown that long periods of repetitive motion, improper
positioning of your computer peripherals, incorrect body position, and poor
habits may be associated with physical discomfort and injury to nerves,
tendons, and muscles. Below are some guidelines to avoid injury and ensure
optimum comfort while using your Razer RZ01-0487.
- Position your keyboard and monitor directly in front of you with your mouse next to it. Place your elbows next to your side, not too far away, and your keyboard within easy reach.
- Adjust the height of your chair and table so that the keyboard and mouse are at or below elbow-height.
- Keep your feet well supported, posture straight and your shoulders relaxed.
- During gameplay, relax your wrist and keep it straight. If you do the same tasks with your hands repeatedly, try not to bend, extend or twist your hands for long periods.
- Do not rest your wrists on hard surfaces for long periods. Use a wrist rest to support your wrist while gaming.
- Do not sit in the same position all day. Get up, step away from your desk and do exercises to stretch your arms, shoulders, neck, and legs.
If you experience any physical discomfort while using your mouse, such as pain, numbness, or tingling in your hands, wrists, elbows, shoulders, neck, or back, please consult a qualified medical doctor immediately.
MAINTENANCE AND USE
The Razer RZ01-0487 requires minimum maintenance to keep it in optimum
condition. Once a month, we recommend you clean the device using a soft cloth
or cotton swab to prevent dirt buildup. Do not use soap or harsh cleaning
agents.
To get the ultimate experience in movement and control, we highly recommend a
premium mouse mat from Razer. Some surfaces will cause undue wear on the feet
requiring constant care and eventual replacement.
Do note that the sensor of the Razer RZ01-0487 is ‘tuned’ or optimized,
especially for the Razer mouse mats. This means that the sensor has been
tested extensively to confirm that the Razer RZ01-0487 reads and tracks best
on Razer mouse mats.
REGULATORY AND COMPLIANCE INFORMATION
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Canada Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance.
STATEMENT OF COMPLIANCE WITH EU DIRECTIVE
Hereby, Razer (Europe) GmbH, declares that this Razer Basilisk V3 X Hyperspeed
(Gaming
Mouse Model: RZ01-0487 and USB Dongle Model: DGRFG7) is in compliance with the
essential requirements and other relevant provisions of Directive 2014/53/EU
and 2015/863/EU.
E-mail: compliance@razer.com
The full Declaration of Conformity is accessible via the following :
Internet address: razer.com/legal/
Gaming Mouse:
- Radio Frequency: 2.4Ghz SRD
- Operating Frequency: 2402-2480Mhz
- Max Output power: 6.04dBm
- Radio Frequency: Bluetooth LE
- Operating Frequency: 2402-2480Mhz
- Max Output power: 6.3dBm
- RF exposure (SAR): The device can safely be used with a distance of 0mm to the human body.
LEGALESE
COPYRIGHT AND INTELLECTUAL PROPERTY INFORMATION
©2023 Razer Inc. All rights reserved. Razer, the triple-headed snake logo,
Razer logo, “For Gamers. By Gamers.”, and “Razer Chroma” logo are trademarks
or registered trademarks of Razer Inc. or affiliated companies in the United
States and other countries. All other trademarks are the property of their
respective owners.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc., and any use of such marks by Razer is under license.
Windows and the Windows logo are trademarks of the Microsoft group of
companies.
Razer Inc. (“Razer”) may have copyright, trademarks, trade secrets, patents,
patent applications, or other intellectual property rights (whether registered
or unregistered) concerning the product in this guide. Furnishing of this
guide does not give you a license to any such copyright, trademark, patent or
other intellectual property right. The Razer RZ01-0487 (the “Product”) may
differ from pictures whether on packaging or otherwise. Razer assumes no
responsibility for such differences or for any errors that may appear.
Information contained herein is subject to change without notice.
LIMITED PRODUCT WARRANTY
For the latest and current terms of the Limited Product Warranty, please visit
razer.com/warranty.
LIMITATION OF LIABILITY
Razer shall in no event be liable for any lost profits, loss of information or
data, special, incidental, indirect, punitive or consequential or incidental
damages, arising in any way out of distribution of, sale of, resale of, use
of, or inability to use the Product. In no event shall Razer’s liability
exceed the retail purchase price of the Product.
GENERAL
These terms shall be governed by and construed under the laws of the
jurisdiction in which the Product was purchased. If any term herein is held to
be invalid or unenforceable, then such term (in so far as it is invalid or
unenforceable) shall be given no effect and deemed to be excluded without
invalidating any of the remaining terms. Razer reserves the right to amend any
term at any time without notice.
FOR GAMERS . BY GAME RS .™
References
- Razer Legal | Razer United States
- Razer Synapse 3 - Cloud-Based Hardware Configuration Tool | Razer United States | Razer United States
- Razer Warranty Policy | Razer United States
- support.razer.com